• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.10a
• /
• pp.377-386
• /
• 2000

Hybrid mass dampers consist of passive tuned mass dampers and active mass dampers. They have the advantage that passive tuned mass dampers are still operated even when active mass dampers are stopped by excessive disturbances or power failure. This paper begins first with the comparative analysis of tuned mass dampers, hybrid mass dampers, and active mass dampers. Next more detailed study is carried out on the hybrid mass dampers: cascade hybrid mass dampers (CHMD) and active tuned mass dampers (ATMD). CHMD is regarded as more reasonable device because of its lighter active mass than ATMD's. However CHMD can not neglect stroke saturation problem caused by the length limitation of active damper mass. We compensate the saturation problem with nonlinear restoring force. The restoring force is calculated based on the states and phases of active mass dampers and added to the control force. It is shown that the presented compensation method prevents CHMD from saturation behavior without apparent changes of control force and responses compared to those in case of not considering the saturation problem.

• The Journal of the Korea Contents Association
• /
• v.9 no.2
• /
• pp.67-75
• /
• 2009

The growing need for the mobility supportable networks induces the IP-based mobility management protocols. Though HMIPv6 which manages the micro-mobility of mobile nodes using MAPs suggests an effective method for mobility-support for mobile nodes within the domain that is managed by MAP. There is a problem that traffic may be concentrated on MAPs. In this paper, therefore, we proposed a method that can effectively distribute the traffic which is concentrated on a MAP under phased Mobile IPv6. In our proposed method, two or more MAPs are required and classified as an 'Active MAP' or a 'Passive MAP'. In addition, we defined the state of transition events between Active MAP and Passive MAP and the operations among MAPs for load distribution when an overload condition is occurred at some MAPs by traffic congestion. We compared the performance of our proposed method with its phased Mobile IPv6 to prove the propriety of our proposed method. As a result, we showed that our proposed method can provide an enhanced performance by about 12 percentages in view of packet throughput at the node.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.2
• /
• pp.268-277
• /
• 2000

Nowadays, the interference between neighbor basestations is getting higher as mobile communication services expand, then the increase of the interference causes IMD(Intermolulation Distortion) problems for not only active devices but also passive devices. In this paper, we have designed and assembled several adapters having variable plating thickness and materials to analyze PIMD(Passive Intermodulation Distortion) mechanisms for coaxial cables which is one of the representative passive RF devices. The measurement results of the assembled adapters show that IM level depends on conductivity of plating materials, plating thickness, device structure, aging effect and so on. Furthermore, we have obtained PIMD mechanisms and some control methods of PIMD from the results.

• Wind and Structures
• /
• v.2 no.1
• /
• pp.69-83
• /
• 1999

The most common used control device on tall buildings and high-rise structures is active and passive tuned mass damper (ATMD and TMD). The major advantages of ATMD and TMD are discussed. The existing installations of various passive/active control devices on real structures are listed. A set of parameter optimization methods is proposed to determine optimal parameters of passive tuned mass dampers under wind excitation. Simplified formulas for determining the optimal parameters are proposed so that the design of a TMD can be carried out easily. Optimal design of wind-induced vibration control of frame structures is investigated. A thirty-story tall building is used as an example to demonstrate the procedure and to verify the efficiency of ATMD and TMD with the optimal parameters.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.17
• /
• pp.7407-7411
• /
• 2014

The incidence of urban female breast cancer has been continuously increasing over the past decade with unknown etiology. One hypothesis for this increase is carcinogen exposure from tobacco. Therefore, the objective of this study was to investigate the risk of urban female breast cancer from tobacco smoke exposure. The matched case control study was conducted among Thai females, aged 17-76 years and living in Bangkok or its surrounding areas. A total of 444 pairs of cases and controls were recruited from the Thai National Cancer Institute. Cases were newly diagnosed and histologically confirmed as breast cancer while controls were selected from healthy women who visited a patient, matched by age ${\pm}5$ years. After obtaining informed consent, tobacco smoke exposure data and information on other potential risk factors were collected by interview. The analysis was performed by conditional logistic regression, and presented with odds ratio (ORs) and 95% confidence intervals(CI). From all subjects, 3.8% of cases and 3.4% of controls were active smokers while 11.0% of cases and 6.1% of controls were passive smokers. The highest to lowest sources of passive tobacco smoke were from spouses (40.8%), the workplace (36.8%) and public areas (26.3%), respectively. After adjusting for other potential risk factors or confounders, females with frequent low-dose passive smoke exposure (${\leq}7$ hours per week) from a spouse or workplace had adjusted odds ratio 3.77 (95%CI=1.11-12.82) and 4.02 (95%CI=1.04-15.50) higher risk of breast cancer compared with non-smokers, respectively. However, this study did not find any association of breast cancer risk in high dose passive tobacco smoke exposure, or a dose response relationship in cumulative passive tobacco smoke exposure per week, or in the active smoker group. In conclusion, passive smoke exposure may be one important risk factor of urban female breast cancer, particularly, from a spouse or workplace. This risk factor highlights the importance of avoiding tobacco smoke exposure as a key measure for breast cancer prevention and control.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.1
• /
• pp.203-217
• /
• 2015

The purpose of the study is to explore leisure time use of older adults and find out relationships between active/passive leisure activities and socioeconomic backgrounds in order to prepare later life for homo hundred. The subjects were 336 adults aged 50 and over in Busan city, Korea. Results are as follows. First, the subjects spent more time in active leisure than passive. But ratio of passive leisure time is getting higher with age. Second, cognitive activities changed from reading, computing, internet to hobbies, card games with age. Third, participation of active leisure activities are related to age and socioeconomic backgrounds. From this study, lifelong education including leisure education should support older adults to redesign their later life for homo hundred. Second, leisure education should focus on increasing the ability of accepting and utilizing leisure opportunities for older adults. Third, the role of lifelong educator should be emphasized to involve education field more actively. Forth, lifelong education institutions should have the knowledge of the purposes and motivations of older adults who participate in order to provide proper programs continuously. The connection between lifelong education and leisure time use and activities would lead later life with the quality of life and active aging.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.4
• /
• pp.37-43
• /
• 2005

This paper presents a hybrid control algorithm for the active noise control in the rectangular enclosure using an active/passive foam actuator. The hybrid control composes of the adaptive feedforward with feedback loop in which the adaptive feedforward control uses the well-known filtered-x LMS(least mean square) algorithm and the feedback loop consists of the sliding mode controller and observer. The hybrid control has its robustness for both transient and persistent external disturbances and increases the convergence speed due to the reduced variance of the jiltered-x signal by adding the feedback loop. The sliding mode control (SMC) is used to incorporate insensitivity to parameter variations and rejection of disturbances and the observer is used to get the state information in the controller deign. An active/passive smart foam actuator is used to minimize noise actively using an embedded PVDF film driven by an electrical input and passively using an absorption-foam. The error path dynamics is experimentally identified in the form of the auto-regressive and moving-average using the frequency domain identification technique. Experimental results demonstrate the effectiveness of the hybrid control and the feasibility of the smart foam actuator.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.12
• /
• pp.615-623
• /
• 2001

In this paper, we study a series active power filter to compensate current harmonics and unbalanced source voltages. Conventional control methods for compensating unbalanced source voltages use source voltages to calculate compensation voltages, and in addition use load voltages to regulate load voltages. But the proposed control method uses load voltage to compensate unbalanced source voltages and regulate load voltages. And we propose a control method to reduce current harmonics which can calculate compensation voltages directly from source currents and load voltages. By well-matched operation of two control methods, the series active power filter can compensate current harmonics, unbalanced source voltages, and regulate load voltages. We compose a combined system of the series active power filter and parallel passive filters to confirm a validity of proposed control methods. The results from experiments are presented to demonstrate effectiveness of the proposed method.

• Korean Journal of Child Studies
• /
• v.20 no.1
• /
• pp.61-77
• /
• 1999

This study investigated characteristics of children's coping behaviors in the context of perceived controllability of stress in hassles with parent(s), friend-alienation, friend-conflict, and in learning situations. The subjects were 489 sixth grade children selected from seven elementary schools in Seoul. Statistical analysis was by ANOVA, Scheffe' test, and MANOVA. Major findings were that (1) Active, passive, aggressive, and avoidant coping differed by perceived controllability of stress in all 4 stress situations. The children who perceived a higher level of controllability were more active, and less passive, aggressive, and avoidant in coping with each hassle. (2) Perceived controllability was higher in learning related than in friend-conflict situations. Active, passive, and social support seeking coping behavior was higher in learning related stress situations than in friend-conflict situations. Avoidant coping behavior was lower in learning related than in friend-conflict situations.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.348-348
• /
• 2008

In recent, the concept of system-on-package (SOP) for highly integrated multifunctional systems has been paid attention to for the miniaturization and high frequency of electronic devices. In order to realize SOP, co-integration of passive devices, such as capacitors, resistors and inductors, and active devices should be achieved. If ceramic thick films can be grown at room temperature, we expect to be able to overcome many problems in conventional fabrication processes. So, we focused on the aerosol deposition method (ADM) as room temperature fabrication technology. ADM is a novel ceramic coating method based on the Room Temperature Impact Consolidation (RTIC) phenomena. This method has a wide range potential for fabrication of co-integration of passive and active devices. In this paper, I will present the future potential of ADM introducing various ceramic dielectric thick films for the integration of electronic ceramics.