• 한국실내디자인학회논문집
• /
• 제18권6호
• /
• pp.28-35
• /
• 2009

The purpose of this study is to analyze the state-of-the-art housing cases with passive cooling technologies and to explore the feasibilities for their applications in domestic housing design. Nineteen Leadership in Energy and Environmental Design housing cases from 2002 to 2007 were selected and analyzed their used passive cooling technologies. Besides traditional passive cooling technologies such as site planning according to the sun direction, the use of thermal mass, insulation, shading, below-ground spaces and ventilation, the relatively new technology trends were detected as followings; the use of high performance envelope, operable windows, and geo-thermal energy as the cooling source of heat pumps, increased areas of photovoltaic cells, and the education of the owner and tenants about the adopted passive cooling technologies in a building. Especially, the education may have not been focused in the domestic design despite of its effectiveness on the appropriate operations of passive cooling technologies. The results of this study show their positive adaptations would be beneficial to domestic housing design to reduce energy costs and have cooler housing environments in summer.

• Geomechanics and Engineering
• /
• 제32권3호
• /
• pp.335-346
• /
• 2023

For structures with underground basement walls, the soil-structure-interaction between the side soil and the walls affects the response of the system. There is interest in quantifying the relationship between the lateral earth pressure and the wall displacement using p-y curves. To date, passive p-y curves in available limited studies were assumed elastic-perfectly plastic. In reality, the relationship between earth pressure and wall displacement is complex. This paper focuses on studying the development of passive p-y curves behind rigid walls supporting granular soils. The study aims at identifying the different components of the passive p-y relationship and proposing a rigorous non-linear p-y model in place of simplified elastic-plastic models. The results of the study show that (1) the p-y relationship that models the stress-displacement response behind a rigid basement wall is highly non-linear, (2) passive p-y curves are affected by the height of the wall, relative density, and depth below the ground surface, and (3) passive p-y curves can be expressed using a truncated hyperbolic model that is defined by a limit state passive pressure that is determined using available logarithmic spiral methods and an initial slope that is expressed using a depth-dependent soil stiffness model.

• 영어어문교육
• /
• 제12권4호
• /
• pp.69-89
• /
• 2006

This study investigated whether and how semantic nature of intransitive verbs can be related to the L2 overpassivization errors. A total of 126 Korean high school students participated in a grammaticality judgment test on English sentences in which seven semantically different types of intransitive verbs were passivized. The results showed that there was an effect of semantic type on the students' judgment on overpassivization errors. Overall, it was shown that the students experienced the lowest degree of difficulty with the Controlled Process-Motional type verbs while experiencing the high degree of difficulty with the Change of State, Existence of State, Continuation of Pre-existing State, and Uncontrolled Process types. Two interlanguage patterns were also identified: the students at higher proficiency level and those at lower-proficiency level showed distinctive patterns on the task. It was argued that the simple dichotomy of unaccusative-unergative distinction does not suffice for the explanation of the complex phenomenon of L2 overpassivization.

• Journal of the Optical Society of Korea
• /
• 제15권1호
• /
• pp.56-60
• /
• 2011

We demonstrate passive mode-locking of a Cr:forsterite laser with a single-walled carbon nanotube saturable absorber mirror (SWCNT-SAM). Without compensation of intra-cavity dispersion, the self-mode-locked laser generates 11.7 ps pulses at a repetition rate of 86 MHz. The dispersion-compensated laser yields ultrashort pulses as short as 80 fs near $1.25\;{\mu}m$ at 78 MHz with average output powers up to 295 mW, representing the highest power ever reported for mode-locked solid-state lasers based on saturable absorption of SWCNTs in this spectral region.

• Corrosion Science and Technology
• /
• 제6권6호
• /
• pp.311-315
• /
• 2007

The anodic polarization behavior of equiatomic TiNi shape memory alloy with pure titanium as a reference material was investigated by means of open circuit potential measurement and potentiodynamic polarization technique. And the structure of passive films on TiNi intermetallic compounds was also conducted using AES and ESCA. While the dissolved Ni(II) ion did not affect the dissolution rate and passivation of TiNi alloy, the dissolved Ti(III) ion was oxidated to Ti(IV) ion on passivated TiNi surface at passivation potential. It has also been found that the Ti(IV) ion increases the steady state potential, and passivates TiNi alloy at a limited concentration of Ti(IV) ion. The analysis by AES showed that passive film of TiNi alloy was composed of titanium oxide and nickel oxide, and the content of titanium was three times higher than that of nickel in outer side of passive film. According to the ESCA analysis, the passive film was composed of $TiO_2$ and NiO. It seems reasonable to suppose that NiO could act as unstabilizer to the oxide film and could be dissolved preferentially. Therefore, nickel oxide contained in the passive film may promote the dissolution of the film, and it could be explained the reason of higher pitting susceptibility of TiNi alloy than pure Ti.

• 한국지반공학회지:지반
• /
• 제3권2호
• /
• pp.55-70
• /
• 1987

본 연구에서는 정지토탄상태에서 수동토추상태 까지의 토압의 변화를 옹벽의 변위량에 따라 나타 내는 새로운 이론이 제시되었다. 제시된 이론은 2차원평형조건식과 Mohr-Coulomb의 파괴규준을 변 궐한 최대주응력과 최소주응력의 관계식을 바탕으로 이루어졌으며, 또한 옹벽의 변위량에 따른 흙의 내부마찰자(f)과 벽마찰각(5)의 변화를 옹벽상단에서 부터의 깊이의 함수로 나타내는 수학적 model이 개발되었다. 결과치를 수치해석적으로 구하기 위해 유한차분법이 이용되었고 또하 얻어 진 결과치를 실험치와 비교함으로써 본 연구에서 제시된 이론의 적합성이 확인되었다. 옹벽 설계와 관련된 벽마찰카의 변화가 토압에서 미치는 영향에 대해서도 아울러 고찰되었다.

• 전기학회논문지
• /
• 제67권2호
• /
• pp.314-324
• /
• 2018

This paper proposes a linear distributed target tracking filter for multiple unmanned aerial vehicles(UAVs) sharing their passive sensor measurements through communication channels. Different from the conventional nonlinear filtering schemes, the distributed passive target tracking problem is newly formulated within the framework of a linear robust state estimation theory incorporated with a linear uncertain measurement equation including the coordinate transform uncertainty. To effectively cope with the performance degradation due to the coordinate transform uncertainty, a linear consistent robust Kalman filter(CRKF) theory is devised and applied for designing a distributed passive target tracking filter. Through the simulations for typical UAV surveillance mission, the superior performance of the proposed method over the existing schemes of distributed passive target tracking are demonstrated.

• Corrosion Science and Technology
• /
• 제2권1호
• /
• pp.7-11
• /
• 2003

Photoelectrochemical response and electrochemical impedance behavior was investigated for passive film formed on sputter-deposited Cr alloy in $0.1kmol{\cdot}m^{-3}$. Photoelectrochemical action spectrum could be separated into two components, which were considered to be derived from $Cr_2O_3$ ($E_g\sim3.6eV$) and $ Cr(OH)_3 $ ($E_g\sim2.5eV$). The band gap energy, $E_g$, of each component was almost constant for various applied potentials. polarization periods and alloying additives. The photoelectrochemical response showed negative photo current for most potentials in the passive region. Therefore, the photo current apparently exhibited p-typesemiconductor behavior. On the other hand, Mort-Schottky plot of the capacitance showed positive slope, which means that passive film formed on Cr alloy has n-type semiconductor property. These apparently conflicting results are rationally explained assuming that the passive film on Cr alloy formed in the acid solution has n-type semiconductor property with a fairly deep donor level in the band gap and forms an accumulation layer in the most of potential region in the passive state.

• Corrosion Science and Technology
• /
• 제6권1호
• /
• pp.7-11
• /
• 2007

In this study, new evaluation method for the stability and corrosion resistance properties of passive films has been suggested by means of observation of self-activation process in open-circuit state and galvanostatic nanoscale reduction test. The experiments were performed for air-formed oxide film in case of plain carbon steel, and for anodically passivated films formed in aqueous sulfuric acid solutions in case of titanium and 304 stainless steel. From these experimental results, we derived two parameters, $i_{0}$ and $q_{0}$, which characterize the self-activation process and the properties of passive film on a stainless steel surface. The parameter $i_{0}$ was defined as the rate of self-activation, and $q_{0}$, the reduced amount of charge during the self-activation process. In conclusion, it is considered that the stability and corrosion resistance of passive metals and alloys can be evaluated quantitatively by three parameters of $\tau_{0}$, $q_{0}$, and $i_{0}$, which easily obtain by means of observing the self-activation process and galvanostatic nanoscale reduction test.

• Smart Structures and Systems
• /
• 제4권6호
• /
• pp.741-757
• /
• 2008

The research field of structural control has evolved from the development of passive devices since 1970s, through the intensive investigation on active systems in 1980s, to the recent studies of semi-active control systems in 1990s. Currently semi-active control is considered most promising in civil engineering applications. However, actual implementation of semi-active devices is still limited due mainly to their system maintenance and associated long-term reliability as a result of power requirement. In this paper, the concept of functionally upgraded passive devices is introduced to streamline some of the state-of-the-art researches and guide the development of new passive devices that can mimic the function of their corresponding semi-active control devices for various applications. The general characteristics of this special group of passive devices are discussed and representative examples are summarized. Their superior performances are illustrated with cyclic and shake table tests of two example devices: mass-variable tuned liquid damper and friction-pendulum bearing with a variable sliding surface curvature.