• 마이크로전자및패키징학회지
• /
• 제15권1호
• /
• pp.7-18
• /
• 2008

This paper reviews the current development of an ultra-slim SiP for Radio Frequency (RF) application, in which three flip chips, additional passive components and Surface Acoustic Wave (SAW) filters are integrated side-by-side. A systematic investigation is carried out for the design optimization, process and reliability improvement of the package, which comprises several aspects: a design study based on the 3D thermo-mechanical finite element analysis of the packaging, the determination of stress, warpage distribution, critical failure zones, and the figuration of the effects of material properties, process conditions on the reliability of package. The optimized material sets for manufacturing process were determined which can reduce the number of testing samples from 75 to 2. In addition the molded underfilling (MUF) process is proposed which not only saves one manufacturing process, but also improves the thermo-mechanical performance of the package compared with conventional epoxy underfilling process. In the end, JEDEC's moisture sensitivity test, thermal cycle test and pressure cooker tests have also been carried out for reliability evaluation. The test results show that the optimized ultra-slim SiP has a good reliability performance.

• 대한화학회지
• /
• 제56권4호
• /
• pp.448-458
• /
• 2012

In order to develop alloy resistance in aggressive sulphat ion, the corrosion behavior of metallic glasses $Ni_{92{\cdot}3}Si_{4.5}B_{32}$, $Ni_{82,3}Cr_7Fe_3Si_{4.5}B_{3.2}$ and $Ni_{75.5}Cr_{13}Fe_{4.2}Si_{4.5}B_{2.8}$ (at %) at different concentrations of $H_2SO_4$ solutions was examined by electrochemical methods and Scanning Electron Microscope (SEM) and X-ray Photoelectron Microscopy (XPS) analyses. The corrosion kinetics and passivation behavior was studied. A direct proportion was observed between the corrosion rate and acid concentration in the case of $Ni_{92{\cdot}3}Si_{4.5}B_{32}$ and $Ni_{75.5}Cr_{13}Fe_{4.2}Si_{4.5}B_{2.8}$ alloys. Critical concentration was observed in the case of $Ni_{82,3}Cr_7Fe_3Si_{4.5}B_{3.2}$ alloy. The influence of the alloying element is reflected in the increasing resistance of the protective film. XPS analysis confirms that the protection film on the $Ni_{92{\cdot}3}Si_{4.5}B_{32}$ alloy was NiS which is less protective than that formed on Cr containing alloys. The corrosion rate of $Ni_{82,3}Cr_7Fe_3Si_{4.5}B_{3.2}$ and $Ni_{75.5}Cr_{13}Fe_{4.2}Si_{4.5}B_{2.8}$. alloys containing 7% and 13% Cr are $7.90-26.1{\times}10^{-3}$ mm/y which is lower about 43-54 times of the alloy $Ni_{92{\cdot}3}Si_{4.5}B_{32}$ (free of Cr). The high resistance of $Ni_{75.5}Cr_{13}Fe_{4.2}Si_{4.5}B_{2.8}$ alloy at the very aggressive media may due to thicker passive film of $Cr_2O_3$ which hydrated to hydrated chromium oxyhydroxide.

• 동의생리병리학회지
• /
• 제25권1호
• /
• pp.37-47
• /
• 2011

This study was aimed to investigate the memory enhancing effect of Jeongjihwan against scopolamine-induced amnesia in C57BL/6 mice. To determine the effect of Jeongjihwan on the memory and cognitive function, we have injected scopolamine (1 mg/kg, i.p.) into C57BL/6 mice 30 min before beginning of behavior tests. We have conducted Y-maze, Morris water-maze, passive avoidance and fear conditioning tests to compare learning and memory functions. Scopolamine-induced behavior changes of memory impairment were significantly restored by oral administration of Jeongjihwan (100 or 200 mg/kg/day). To elucidate the molecular mechanism underlying the memory enhancing effect of Jeongjihwan, we have examined the antioxidant defense system and neurotrophic factors. Jeongjihwan treatment attenuated intracellular accumulation of reactive oxygen species and up-regulated mRNA and protein expression of antioxidant enzymes as assessed by RT-PCR and western blot analysis, respectively. Jeongjihwan also increased protein levels of brain-derived neurotrophic factor (BDNF) compared with those in the scopolamine-treated group. Furthermore, as an upstream regulator, the activation of cAMP response element-binding protein (CREB) via phosphorylation was assessed by Western blot analysis. Jeongjihwan elevated the phosphorylation of CREB (p-CREB), which seemed to be mediated partly by extracellular signal-regulated kinase1/2 (ERK1/2) and protein kinase B/Akt. These findings suggest that Jeongjihwan may have preventive and therapeutic potential in the management of amnesia.

• 천문학회보
• /
• 제35권1호
• /
• pp.39.2-39.2
• /
• 2010

In this paper, I present the domestic development of near infrared camera systems for the ground telescope and the space satellite. These systems are the first infrared instruments made for astronomical observation in Korea. KASINICS (KASI Near Infrared Camera System) was developed to be installed on the 1.8m telescope of the Bohyunsan Optical Astronomy Observatory (BOAO) in Korea. KASINICS is equipped with a $512{\times}512$ InSb array enable L band observations as well as J, H, and Ks bands. The field-of-view of the array is $3.3'{\times}3.3'$ with a resolution of 0.39"/pixel. It employs an Offner relay optical system providing a cold stop to eliminate thermal background emission from the telescope structures. From the test observation, limiting magnitudes are J=17.6, H=17.5, Ks=16.1 and L(narrow)=10.0 mag at a signal-to-noise ratio of 10 in an integration time of 100 s. MIRIS (Multi-purpose InfraRed Imaging System) is the main payload of the STSAT-3 in Korea. MIRIS Space Observation Camera (SOC) covers the observation wavelength from $0.9{\mu}m$ to $2.0{\mu}m$ with a wide field of view $3.67^{\circ}{\times}3.67^{\circ}$. The PICNIC HgCdTe detector in a cold box is cooled down below 100K by a micro Stirling cooler of which cooling capacity is 220mW at 77K. MIRIS SOC adopts passive cooling technique to chill the telescope below 200K by pointing to the deep space (3K). The cooling mechanism employs a radiator, a Winston cone baffle, a thermal shield, MLI of 30 layers, and GFRP pipe support in the system. Opto-mechanical analysis was made in order to estimate and compensate possible stresses from the thermal contraction of mounting parts at cryogenic temperatures. Finite Element Analysis (FEA) of mechanical structure was also conducted to ensure safety and stability in launching environments and in orbit. MIRIS SOC will mainly perform the Galactic plane survey with narrow band filters (Pa $\alpha$ and Pa $\alpha$ continuum) and CIB (Cosmic Infrared Background) observation with wide band filters (I and H) driven by a cryogenic stepping motor.

• 한국인터넷방송통신학회논문지
• /
• 제14권5호
• /
• pp.223-230
• /
• 2014

본 논문에서는 5.8GHz ISM 대역(5.725GHz~5.825GHz)의 저가 3차원 빔 조향을 위한 단일급전 마이크로스트립 기생 배열 안테나를 설계 및 제작하였다. 안테나는 단일 급전 능동소자와 가변 리액턴스 부하를 갖는 4개의 기생소자로 구성된다. 제작된 안테나의 빔 조향 범위는 가변 리액턴스 부하의 조절에 의해 방위각 ${\Phi}=0^{\circ}$, ${\Phi}=45^{\circ}$, ${\Phi}=90^{\circ}$, ${\Phi}=135^{\circ}$에서 ${\pm}28^{\circ}$의 3차원 빔 조향을 이룰 수 있었다. 빔 조향 범위 내에서 안테나의 최대이득은 7.23dBi~9.36dBi를 가지고, -10dB 이하 반사손실대역폭은 빔 조향각도에 상관없이 항상 5.8GHz ISM 대역을 포함하였다.

• Structural Engineering and Mechanics
• /
• 제47권6호
• /
• pp.881-898
• /
• 2013

This paper describes analytical investigation into a new dual function system including a couple of shear links which are connected in series using chevron bracing capable to correlate its performance with magnitude of earthquakes. In this proposed system, called Chevron Knee-Vertical Link Beam braced system (CK-VLB), the inherent hysteretic damping of vertical link beam placed above chevron bracing is exclusively utilized to dissipate the energy of moderate earthquakes through web plastic shear distortion while the rest of the structural elements are in elastic range. Under strong earthquakes, plastic deformation of VLB will be halted via restraining it by Stopper Device (SD) and further imposed displacement subsequently causes yielding of the knee elements located at the bottom of chevron bracing to significantly increase the energy dissipation capacity level. In this paper first by studying the knee yielding mode, a suitable shape and angle for diagonal-knee bracing is proposed. Then finite elements models are developed. Monotonic and cyclic analyses have been conducted to compare dissipation capacities on three individual models of passive systems (CK-VLB, knee braced system and SPS system) by General-purpose finite element program ABAQUS in which a bilinear kinematic hardening model is incorporated to trace the material nonlinearity. Also quasi-static cyclic loading based on the guidelines presented in ATC-24 has been imposed to different models of CK-VLB with changing of vertical link beam section in order to find prime effectiveness on structural frames. Results show that CK-VLB system exhibits stable behavior and is capable of dissipating a significant amount of energy in two separate levels of lateral forces due to different probable earthquakes.

• Structural Engineering and Mechanics
• /
• 제72권6호
• /
• pp.747-762
• /
• 2019

Based on the ball-screw mechanism, a tuned viscous mass damper (TVMD) has been proposed, which has functions of amplifying physical mass of the system and frequency tuning. Considering the sensitivity of a single TVMD's effectiveness to frequency mistuning like that of the conventional tuned mass damper (TMD) and according to the concept of the conventional multiple tuned mass damper (MTMD), in the present paper, multiple tuned mass viscous dampers (MTVMD) consisting of many tuned mass dampers (TVMD) with a uniform distribution of natural frequencies are considered for attenuating undesirable vibration of a structure. The MTVMD is manufactured by keeping the stiffness and damping constant and varying the mass associated with the lead of the ball-screw type inerter element in the damper. The structure is represented by its mode-generalized system in a specific vibration mode controlled using the mode reduced-order method. Modal properties and fundamental characteristics of the MTVMD-structure system are investigated analytically with the parameters, i.e., the frequency band, the average damping ratio, the tuning frequency ratio, the total number of TVMD and the total mass ratio. It is found that there exists an optimum set of the parameters that makes the frequency response curve of the structure flattened with smaller amplitudes in a wider input frequency range. The effectiveness and robustness of the MTVMD are also discussed in comparison with those of the usual single TVMD (STVMD) and the results shows that the MTVMD is more effective and robust with the same level of total mass.

• Structural Engineering and Mechanics
• /
• 제66권2호
• /
• pp.217-227
• /
• 2018

In the last decades, valuable results have been reported regarding conventional passive, active, semi-active, and hybrid structural control systems on two-dimensional and a few three-dimensional shear buildings. In this research, using a three-dimensional finite element model of high-rise concrete structures, designed by performance based plastic design method, it was attempted to construct a relatively close to reality model of concrete structures equipped with Tuned Mass Damper (TMD) by considering the effect of soil-structure interaction (SSI), torsion effect, hysteresis behavior and cracking effect of concrete. In contrast to previous studies which have focused mainly on linearly designed structures, in this study, using performance-based plastic design (PBPD) design approach, nonlinear behavior of the structures was considered from the beginning of the design stage. Inelastic time history analysis on a detailed model of twenty-story concrete structure was performed under a far-field ground motion record set. The seismic responses of the structure by considering SSI effect are studied by eight main objective functions that are related to the performance of the structure, containing: lateral displacement, acceleration, inter-story drift, plastic energy dissipation, shear force, number of plastic hinges, local plastic energy and rotation of plastic hinges. The tuning problem of TMD based on tuned mass spectra is set by considering five of the eight previously described functions. Results reveal that the structural damage distribution range is retracted and inter-story drift distribution in height of the structure is more uniform. It is strongly suggested to consider the effect of SSI in structural design and analysis.

• 한국철도학회논문집
• /
• 제20권2호
• /
• pp.173-181
• /
• 2017

장애물제거기는 선로 내 장애물에 의한 충돌사고 발생 시 장애물을 선로 밖으로 밀어내거나 에너지흡수부재를 통해 충돌에너지를 흡수하여 열차 탈선을 방지하고 충돌사고에 의한 피해를 최소화하기 위한 장치이다. 본 연구에서는 인장형 에너지흡수부재와 4절 링크를 이용하여 장애물제거기의 작동 메커니즘을 구성하여 장애물제거기를 설계하였다. 또한 EN 15227에서 요구하는 정적강도 및 에너지흡수조건을 확인하기 위한 성능검증시험 방법을 고안한 뒤 유한요소해석 및 UTM (Universal Test Machine)을 이용한 성능검증시험을 수행하였다. 본 연구를 통해 EN 15227의 요구조건을 만족하는 장애물제거기를 개발하였으며, 제안된 장애물제거기의 설계 및 검증 절차에 따라 붕괴하중의 조절이 가능하며 이를 실험을 통해 검증할 수 있는 방법을 제안하였다.

• 한국음향학회지
• /
• 제33권6호
• /
• pp.366-374
• /
• 2014

저주파 능동 소나를 이용한 잠수함 탐지 기술이 개발됨에 따라, 기존의 수동 무반향 타일을 대치할 새로운 잠수함 스텔스 기술이 요구되는 추세이다. 본 연구에서는 선체 표면과 같은 대면적에 적용 가능한 타일형 프로젝터를 이용하여 능동 임피던스 정합을 구현함으로써 저주파 반향음 감소를 도모하는 기법을 제안한다. 먼저 능동 임피던스 정합 기법의 기술적 타당성을 확인하기 위하여 유한요소 모델을 이용한 저주파 반향음 감소 시뮬레이션을 수행하였다. 이를 바탕으로 타일형 프로젝터를 설계 및 제작하여 음향수조에서 저주파 반향음 감소 실험을 수행하였다.