• Corrosion Science and Technology
• /
• 제6권6호
• /
• pp.311-315
• /
• 2007

The anodic polarization behavior of equiatomic TiNi shape memory alloy with pure titanium as a reference material was investigated by means of open circuit potential measurement and potentiodynamic polarization technique. And the structure of passive films on TiNi intermetallic compounds was also conducted using AES and ESCA. While the dissolved Ni(II) ion did not affect the dissolution rate and passivation of TiNi alloy, the dissolved Ti(III) ion was oxidated to Ti(IV) ion on passivated TiNi surface at passivation potential. It has also been found that the Ti(IV) ion increases the steady state potential, and passivates TiNi alloy at a limited concentration of Ti(IV) ion. The analysis by AES showed that passive film of TiNi alloy was composed of titanium oxide and nickel oxide, and the content of titanium was three times higher than that of nickel in outer side of passive film. According to the ESCA analysis, the passive film was composed of $TiO_2$ and NiO. It seems reasonable to suppose that NiO could act as unstabilizer to the oxide film and could be dissolved preferentially. Therefore, nickel oxide contained in the passive film may promote the dissolution of the film, and it could be explained the reason of higher pitting susceptibility of TiNi alloy than pure Ti.

• 한국전자파학회논문지
• /
• 제11권2호
• /
• pp.268-277
• /
• 2000

이동통선 서비스가 확장됨에 따라 인접 기지국간의 간섭이 증가하고 그에 따른 IMD(Intermodulation Distortion) 문제도 증가하여 Active IMD뿐만 아니라 Passive IMD(Passive Intermodulation Distortion)에 대한 문 제도 함께 부상하고 었다. 따라서 본 고에서는 대표적인 RF 소자 중 동축선에서의 PIMD의 발생기구의 분석을 위하여 다양한 도금 두께와 도금 재질을 갖는 어랩터를 설계 및 제작하였다. 제작된 어댐터 측정결과 1M 발생 수준이 도금 재질의 전도율, 소자의 구조, 도금 재질의 두께. Aging현상 등에 의존함을 확인하였으며, 도금 두께의 변화와 재질의 변화를 통해 PIMD 발생기구를 분석하였고, PIMD의 제어기술 방안을 검토하였다.

• KIEAE Journal
• /
• 제13권3호
• /
• pp.33-40
• /
• 2013

The world population is consuming more than 1/3 of the total energy for heating housings. Particularly in our country, 21% of the consumption energy is occupied by building section. Therefore, it is necessary to increase the energy efficiency in buildings, thus promoting a comfortable residential environment while minimizing energy consumption. Accordingly, this study presents considerations for implementing high-insulated and airtight passive houses. This study selected four houses with passive house design applied, performed building energy performance through PHPP2007, a German passive house design simulation program, and compared the building-specific heat loss and heat gain. As a result, the most vulnerable part to heat loss was turned out to be a window and the heat loss was caused by outer wall, roof, and ventilation. Accordingly, for the implementation of passive house, it is necessary to make a careful plan and airtight construction that are complementary to various parts through the energy performance analysis started from the design phase.

• Smart Structures and Systems
• /
• 제7권5호
• /
• pp.417-432
• /
• 2011

The present paper is devoted to vibration canceling and shape control of piezoelastic slender beams. Taking into account the presence of electric networks, an extended electromechanically coupled Bernoulli-Euler beam theory for passive piezoelectric composite structures is shortly introduced in the first part of our contribution. The second part of the paper deals with the concept of passive shape control of beams using shaped piezoelectric layers and tuned inductive networks. It is shown that an impedance matching and a shaping condition must be fulfilled in order to perfectly cancel vibrations due to an arbitrary harmonic load for a specific frequency. As a main result of the present paper, the correctness of the theory of passive shape control is demonstrated for a harmonically excited piezoelelastic cantilever by a finite element calculation based on one-dimensional Bernoulli-Euler beam elements, as well as by the commercial finite element code of ANSYS using three-dimensional solid elements. Finally, an outlook for the practical importance of the passive shape control concept is given: It is shown that harmonic vibrations of a beam with properly shaped layers according to the presented passive shape control theory, which are attached to an resistor-inductive circuit (RL-circuit), can be significantly reduced over a large frequency range compared to a beam with uniformly distributed piezoelectric layers.

• 한국해양공학회지
• /
• 제35권2호
• /
• pp.131-140
• /
• 2021

The paper deals with comparative study of various surrogate models based approximate optimization in the structural design of the passive type deck support frame under design load conditions. The passive type deck support frame was devised to facilitate both transportation and installation of 20,000 ton class topside. Structural analysis was performed using the finite element method to evaluate the strength performance of the passive type deck support frame in its initial design stage. In the structural analysis, the strength performances were evaluated for various design load conditions. The optimum design problem based on surrogate model was formulated such that thickness sizing variables of main structure members were determined by minimizing the weight of the passive type deck support frame subject to the strength performance constraints. The surrogate models used in the approximate optimization were response surface method, Kriging model, and Chebyshev orthogonal polynomials. In the context of numerical performances, the solution results from approximate optimization were compared to actual non-approximate optimization. The response surface method among the surrogate models used in the approximate optimization showed the most appropriate optimum design results for the structure design of the passive type deck support frame.

• 천문학회보
• /
• 제44권1호
• /
• pp.38.3-38.3
• /
• 2019

We investigate the stellar population properties of nine passive spiral galaxies in the CALIFA survey. They have NUV-r > 5 and no/weak nebular emission lines in their spectra. They lie in the redshift range of 0.001 < z < 0.021 and have stellar mass range of 10.2 < ${\log}(M{\star}/M{\odot})$ < 10.8. We analyze the stellar populations out to two effective radius, using the best-fitting model to the measured absorption line-strength indices in the Lick/IDS system. We compare the passive spirals with S0s selected in the same mass range. S0s cover a wide range in age, metallicity, and [${\alpha}/Fe$], and stellar populations of the passive spirals are encompassed in the spread of the S0 properties. However, the distribution of passive spirals are skewed toward higher values of metallicity, lower [${\alpha}/Fe$], and younger ages at all radii. These results show that passive spirals are possibly related to S0s in their stellar populations. We infer that the diversity in the stellar populations of S0s may result from different evolutionary pathways of S0 formation, and passive spirals may be one of the possible channels.

• 대한환경공학회지
• /
• 제33권11호
• /
• pp.790-796
• /
• 2011

본 연구에서는 시화지구의 공단과 주거 지역에서의 휘발성 유기화합물 농도를 능동식과 수동식 시료채취기를 이용해 측정하고 그 특성을 비교 분석하였다. TVOC의 평균농도는 패시브샘플러(passive sampler)의 경우 공단지역이 주거지역보다 1.86배 더 높게 나타났다. 능동식 시료채취기의 경우 공단지역이 주거지역보다 1.07배 더 높게 나타났다. Passive sampler를 이용하였을 경우 공단지역이 주거지역보다 대부분의 물질에서 농도가 높게 나타났지만 열탈착 흡착 튜브(thermal desorption tube)를 이용했을 경우는 트리클로로에틸렌, 톨루엔, 에틸벤젠, 자일렌 등 일부 물질의 농도에 있어서 주거지역이 오히려 높게 나타났다. 전체 BTEX 비율 중에서 전반적으로 톨루엔이 차지하는 비율이 가장 컸으며, passive sampler의 경우 공단지역이 주거지역보다 톨루엔, 에틸벤젠, 자일렌의 상대비율이 높게 나타났다. 그러나 열탈착 흡착 튜브의 경우는 오히려 주거지역이 더 높게 나타났다. 본 연구를 통해서 대기오염 목적성분의 시간적, 공간적 농도 특성 파악을 위한 passive sampler를 이용하면 오염관리 혹은 역학적 연구에 도움이 되는 적절한 시료채취 방법이라는 사실을 알 수 있었다.

• Transactions on Control, Automation and Systems Engineering
• /
• 제4권2호
• /
• pp.140-146
• /
• 2002

We consider a class of large-scale interconnected time delay systems and investigate a decentralized robust passive control problem. sufficient conditions for unforced interconnected uncertain systems with time delay to be robustly stable with extended strictly passivity is given in terms of algebraic Riccati inequality and linear matrix inequality. The decentralized robust passive control problem for norm-bounded and positive real uncertainty is shown to be converted to extended strictly positive real control problem for a modified system which contains neither time delay nor uncertainty.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.351-354
• /
• 1996

A new target adaptive guidance (TAG) algorithm is proposed to engage the aim point formed by adding a bias to the information from an infrared (IR) seeker for improving passive homing guidance effectiveness. The TAG algorithm utilizes an observability enhancing mid-course guidance algorithm to obtain convergent estimates of state variables involved particularly in range channel otherwise unavailable from passive sensors. Simulation results indicate that the TAG algorithm provides improved terminal effectiveness without computational complexities.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권4호
• /
• pp.569-576
• /
• 2004

In this paper, passive telemetry capacitive humidity sensor system using a RLSE(Recursive Least Square Estimation) technique is proposed. To overcome the problem like power limits and complications that general passive telemetry sensor system including IC chip has, the principle of inductive coupling is applied to model the sensor system. Specially. by applying the forgetting factor we show that the accuracy of its estimation can be improved even in the case of time varying parameter and also the convergence time can be reduced.