• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.449-454
• /
• 2004

As social and cultural value has been changed, customers are demanding equipment innovation of passenger quarters to improve the satisfaction of their needs and the level of transfortation culture. To promote the convenience of passenger and abstract the facilities factor of passenger quarters design, this article analyzed and compared with the facilities factor of passenger quarters which have been operated in domestic and foreign country. While domestic passenger quarters is composed of seat, toilet and washroom, foreign passengers quarters consist of various factor such as familly room, infant room, business room, conversation room, and multipurpose room. Especially, foreign passenger quarters have provided passenger with diversity of attachment space, securing movement line for weak person, and arranging infant/child's space.

• Journal of the Korean Society of Combustion
• /
• v.8 no.2
• /
• pp.7-16
• /
• 2003

The transfer of air pollutants between passenger room and service room in train are investigated by the computational analysis. The effects of service room temperature, inlet velocity, initial concentration and heating are studied. The flow induced by the difference of density between two rooms is found to take the major role in transfer of polluted air. Low temperature of service room enhances the polluted air flow into passenger room along the floor. Exhaust fan above the door between two rooms is not effective for this case. Strong inlet flow is found to suppress polluted air flow from service room. The heating of passenger room can promote air pollution.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.1
• /
• pp.62-66
• /
• 2011

The present work focuses on the evaluation of thermal comfort in passenger cabin of a cruise ship. A computational fluid dynamics (CFD(Airpak)) is used to calculate air velocity and temperature distribution in the passenger cabin as well as PMV and PPD. The CFD is used to simulate two different cases, room unit system and wardrobe duct system. Both of cases are simulated in summer environment condition. The room unit system and wardrobe duct system are compared and evaluated by ISO 7730 thermal comfort categories. The performance of room unit system is shown to be more effective for this typical case of passenger cabin.

• Journal of Korean Institute of Fire Investigation
• /
• v.11 no.1
• /
• pp.83-88
• /
• 2008

The fire outbreaking origin of vehicle fire would be classified into two positions such as engine room and passenger room of vehicle. As a firewall is installed between engine room and passenger room, in case of engine fire, it could be assumed that it takes about 10 to 15 minutes for the fire to spread into passenger room There are two different vehicle engine layouts such as transversal and lateral layout, and the fire spreading process and resulting damage patterns on left and right side dash-panel are different depending on the engine layouts. In accordance, the first thing to do for correct and speedy finding of the fire origin place is considered to be an investigation into the dash-panel damage in case of engine room fire investigation.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.257-262
• /
• 2005

Sleeping cars mean railroad cars which are equipped with facilities available business, travel, rest, sleep for long distance travel. Domestic sleeping cars , as the concept of ‘night train’, provide passenger who travel at night with simple berth . German, Japanese, American sleeping cars are classified with sleeping car, coach car, seat car or first class, standard class, family room, room for the handicapped, which offer not only sleep but various facilities and service such as snack, reading, available shower for daytime travel. Accordingly, through the analyzing spatial factor of domestic and foreign sleeping cars, we first should abstract the demand for fundamental design to enhance our passenger's comfort. And then we should try to improve the quality of travel culture by offering it passenger.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.589-594
• /
• 1998

Heat and fluid flow in the motor block room of a motorized car is numerically simulated. The motorized car, composed of a motor block room and a passenger room, supplies additional Power to achieve the design speed. A motor block, a transformer, and a fan are equipped in the motor block room. Flow phenomena in the ducts on the motor block and power transformer are investigated. Also, the three dimensional heat and fluid flow in the motor block room is simulated to give a qualitative information of the flow characteristics.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.393-399
• /
• 2008

A Study has been conducted on the characteristics of temperature variation depending on passenger number that is measured in Bundang Line(From Sunleng To Bojong). As a basic study, the air quality of passenger room for the electric rail car is evaluated. Although ISO7730 recommends that the height of measuring points for the heat environment is to set at 0.1m, 0.6m, 1.1m and 1.7m respectively, temperature are measured at two points at 1.1m and 1.7m because of the difficulty to measure temperature of 0.1m height in rush hour. We compared the results of temperature variations between two stations in rush hour(07:56-08:41). In general, the capacity of a passenger car is designed for 160 persons, but over 280 persons often board on electric rail in rush hour. The temperature of room is adjusted from $22^{\circ}C$ to $24^{\circ}C$, but it is measured from $26^{\circ}C$ to $28^{\circ}C$ on average. Therefore, it shows that there are difference between the set temperature and measured one. This article suggests the ways of the time adjusting and air-conditioning to satisfy customer's demand and the guide line to design the optimum capacity of air-conditioner of the new electric rail car which will be introduced in the near future.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.463-470
• /
• 2000

The challenge to be faced in public transportation today is to satisfy human needs with the least delay, with the smallest number of accidents, and with the most economic use of energy, space, materials, man-power and money. One possible solution may lie in city train system, including AGT system. Specially, Passenger space in AGT is important to balance the budget of layout with passenger's satisfaction. This study focuses on lay-out and space, comfort which should be considered from the conceptual design stage of the interior layout work. Traditionally, the interior layout of the passenger room has emphasized ridequality and style. However, as the train becomes more prevalent and versatile, the focus also tends to shift toward layout and space to have comfortable circumstances. After all, the purpose of this research focused on arrangement a rational interior layout of the train through ergonomics research. Finally, the key was ensuring the comfortable environment based on cultural background of the passenger.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.107-114
• /
• 2006

This paper investigates the radiating source of electro-magnetic waves in the cabin of automobile with spark ignition engine. Front seats are very close to the engine room where electro-magnetic waves are expected to be radiating. But front seat area is believed to be a blind zone, which is not affected by radiating electro-magnetic waves, because a bulk board and floor board shield the front seat area. The level and frequency spectrum of electro-magnetic waves are measured at the passenger seat and the engine room. The measured frequency range is $145{\sim}365MHz$. As a results, the level of the electro-magnetic waves of automatic transmission vehicle is greater than -82dBm. The shapes of frequency spectrum of both engine room and passenger seat are look alike. But the level of electro-magnetic waves of manual transmission vehicle is less than -82dBm and the shapes of frequency spectrum of engine room and passenger seat are different to each other. From these results, we can say that any mal-function caused by electro-magnetic waves in the automobile cabin are only possible for automatic transmission vehicle. Also, it is believed that the radiating source of electro-magnetic waves is inside the vehicle. Thus, based on the transmission line theory, this paper presumably concludes that the cables which connect all the components inside a automatic transmission vehicle must be a radiating source of electro-magnetic waves in the cabin.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1327-1334
• /
• 2011

subway has became citizen's feet which can transport over 24 million people since the era of high oil price started. Because the request of passengers for more comfortable thermal comfort is drastically increasing, the importance of comfortable environment in the passenger car is more stressed. This paper suggests an indicator whether railroad car is fitted with suitable cooling and heating equipment by applying the international climatic testing method, UIC 553, 553-1. Specified ambient temperature, humidity, solar irradiation condition, as well as extreme outside condition, can be achieved by using an environmental chamber. The change temperature and humidity in the passenger space can be monitored to judge if the passenger room is nicely air-conditioned.