• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.4
• /
• pp.31-36
• /
• 2011

Smart Door(SD) is a human friendly power-assisted door system for passenger car doors. It offers comfort and safety to passengers and drivers by supplying additional power. In this study, dynamic system model and the equation of motion derivation are derived. And we propose the disturbance observer based collision detection algorithm for safety when opening the door. A disturbance caused by collision has a fast response compared to a friction, uncertainties and so on. The main idea this study is to estimate a variation of disturbance for stably and effectively detecting a collision. In order to evaluate a performance of collision detection, an experiment set up is constructed. The experimental results validate the usefulness of the proposed collision detection algorithm.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.883-890
• /
• 2008

Dynamic instability of the railway bridge can cause track irregularities and be directly connected with unstable passenger comfort and derailment of the train. Europe and Japan had studied on this problem for a long time since 1960's, Results of those studies are reflected in recent Eurocode and the bridge design code of Japanese railway bridges. However, even though some traffic safety requirements were applied in Kyoung-bu highspeed railway by French engineers, we experienced many difficulties from insufficient information of criteria background and application procedures. In the present study, various studies will be presented for the estimation of dynamic performance will be proposed and procedures and methods of estimation will be shown.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.45 no.1
• /
• pp.46-55
• /
• 2009

To compare and evaluate the suitability and comfort levels of the environment on board a stern trawl training ship, KAYA(GT: 1737 tons, Pukyong National University), with the international standardization guide ISO 6954:2000(E), measurements of the hull vibration on accommodation areas and working areas of the training ship from July 8 to July 10, 2008 were completed upon KAYA's linear sea route. The vibrations along the z-axis were measured with the use of a 3-axis vibration level meter, which included a marine vibration card. Results show accelerations of the vibrations on the passenger's accommodation area to be 42.0-115.8(average: 78.0, standard deviation(SD): 21.0) mm/$s^2$, which is largely below the permissible upper limit, but 75 % of the observation points exceeded the permissible lower limit of 71.5 mm/$s^2$, indicating a comfortable environment. The accelerations of the vibration in a frequency of 10-24Hz lowering the visual performance were measured at 2.5-12.0(average: 7.6, SD: 3.1) mm/$s^2$. The crew s accommodation area experienced vibration accelerations of 42.9-82.3(average: 93.1, SD: 53.1) mm/$s^2$, which is generally below the permissible upper limit of 214.0 mm/$s^2$, and 62.5% of the observation points did not exceed the permissible lower limit of 107.0 mm/$s^2$, denoting a level of comfort. The acceleration of the vibration in a frequency of 10-24Hz were 4.7-28.3(average: 12.4, SD: 8.8) mm/$s^2$. On the crew s working area the accelerations were measured at 86.9-153.9(average 119.3, SD 18.0) mm/$s^2$. These values were generally below the permissible upper limit of 286.0 mm/$s^2$ and only 12.5% of the observation points did not exceed the permissible lower limit of 143.0 mm/$s^2$, the level at which a high level of comfort is maintained. The accelerations in frequency of 10-24Hz and 30Hz were 9.1-29.8 (average 13.8, SD= 4.5) mm/$s^2$ and 8.9-13.7 (average 11.8, SD 2.1) mm/$s^2$, respectively. In conclusion the boarding environment of the training ship was good in general although an improvement of the vibration condition partially needed on the crew s accommodation area near the engine room.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.6
• /
• pp.487-495
• /
• 2017

Recently rapid-transit railway systems have been constructed in many developing countries due to its advantages in congestions and environmental problems. Railway bridges show many different aspects compared to road bridges and passenger comfort and traffic safety are one of them. In particular, deflection and acceleration due to repeated vibration characteristics have a structural weakness that can cause undesirable response. Especially steel railway bridges have been known to have weaknesses due to its relatively light weights compared to concrete bridges. The purpose of this study is to analyze the dynamic response of steel box girder bridges due to passing trains then propose the appropriate method to mitigate the level of vibration in terms of accelerations. Three steel railway bridges are tested and the numerical model to analyze the dynamic response of the bridge by passing train are developed. For the verification of the model, the natural frequency extracted using the acceleration data measured in the bridge is compared with the natural frequency of the numerical model. To mitigate the acceleration level of the bridge, parametric studies are performed to find the effectiveness of the method. Based on the analysis, the appropriate method is proposed for decreasing the acceleration of the bridge for passenger comfort and traffic safety.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.1
• /
• pp.71-78
• /
• 2015

In order to deduce an objective evaluation method of motion seasickness incidence (MSI) by ship motions during underway in irregular waves and to present the fundamental data of passenger comfort on the yacht and the passenger ship according to the result, the MSI of the trainees by the questionnaires was analysed and compared with the rate of variation of salivary ${\alpha}$-amylase activity (VSAA) on the training ship "A-ra ho" of Jeju national university. Relationship between rate of variation (x) by salivary ${\alpha}$-amylase activity and motion seasickness incidence (y) was described by the equation, MSI(%) = 0.6073 x + 12.189 including the correlation coefficient ($R^2=0.9853$). The result obtained through the rate of variation of salivary ${\alpha}$-amylase activity which was the quantitative evaluation method for ship motions causing seasickness was most affected by z-vertical acceleration and occurred within the frequency range 0.1 to 0.3Hz centered on 0.2Hz, and the simulation result based on this finding showed the motion seasickness rate at approximately 4% lower than the rate obtained through the survey.

• Journal of the Korean Society for Railway
• /
• v.15 no.6
• /
• pp.558-565
• /
• 2012

Abnormal climate or weather is more frequently reported nowadays due to the global climate change. Especially, extremely low temperature in winter season may cause bad thermal discomfort of passengers. In this study, the effect of car heating modes on cabin temperature change and distribution was studied by using a real-scale environmental chamber for passenger cabin. It was found that the cabin temperature rose quickly at the initial stage of heating system operation, but it stopped increasing after certain point. And, temperature was higher when the height from the floor was higher. Based on the obtained result, the way to minimize the decrease of passengers' thermal comfort was suggested.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2D
• /
• pp.265-273
• /
• 2006

On the occasion of high price oil generation, we have to promote activation policy for public transportation and hold back to use passenger car, it is very important to improve of sidewalk environment for pedestrian. Evaluation for sidewalk environment will be fixed with sensibility to feel pedestrian. So, study for sensibility about comfort etc. to feel pedestrian will be carried out. In this paper, researchers interests in engineering methods to make material considering sensibility and image of human. Therefore, we carried out recognition experiment for sidewalk environment with Kansei engineering, and made a quantitativedata of sensibility adjective that it was surveyed by semantic deferential method. After grasp factors by principal analysis, we found factor effect to design criterion and sidewalk environment preference. So, we could identify a design factor for comfort environment.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.4
• /
• pp.113-122
• /
• 2010

Research and development related to advanced railway systems is currently underway presently to promote the maintenance and economic feasibility of subways, and the aim of such research and development is to enhance the functionality, passenger convenience, system safety and reliability assurance of the subway. In this situation, a study that predicts the effect that the development of such an advanced railway system would have on subway users is required. To this end, this study derived willingness to pay and decision factors with the introduction of an advanced railway system after surveying passengers who use subway lines 1~8. The Price Sensitivity Method (PSM) was applied to derive the willingness to pay in relation to user convenience (operating speed, ride comfort, safety, comfort, security and informativeness) with the introduction of an advanced railway system. In addition, willingness to pay and decision factors were examined after explaining the effects of introducing an advanced railway system in detail to subway users. Through the analysis, it was found that willingness to pay amounted to a premium of 148 won ~ 161 won with the introduction of an advanced railway system, and that this was affected by factors such as gender, frequency of use, satisfaction with comfort, and satisfaction with security.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.614-620
• /
• 2011

Railway intelligent transportation systems and related Ministry of Land and rail operating agency's railway informatization planning of information technology, effective through the use of management strategies to establish or run to support the systematic informatization investment that you want to execute work in progress, during and yet the institutional informatization of operations mainly in the form of efficiency is Chinhae. Accordingly, in order to promote the details of the final challenge of providing real-time information and the usefulness of this information collection is clearly for the railway sector by function of the components is necessary to distinguish. In this paper, the details of the plan goals, promoting convenient rail-based real-time information, to promote optimal gohyoeuleul railways, railway safety and comfort, was defined as three. Selection of each goal, because the direction of vision and ITS around the railroad center of road users by highlighting the benefits of the railroad's traffic information center user switching, real-time delivery of information diversity (enhanced content) that can increase the capacity of line train operating systems, enhancing the safety management system introduced in the monitoring system and is a railroad crossing. Because urban railway project in accordance with the goal of decreasing the annual rate of the train support, and the average passenger wait time savings, increased future demand for railway, rail safety, including securing the expected effects may occur.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.4
• /
• pp.199-206
• /
• 2015

A rising attention is paid to the railway system in many countries. KOREA is also of the opinion that the railway has to play a more important role in the near future to face up to the problems that increase gradually in the transport sector. To attract more traffic to the rail networks, it is important for rail modes to have running time competitiveness. Tilting trains, where it is possible to tilt the car-body towards the center of the curve, are a less expensive alternative to shorten travelling times on existing lines. Running time for tilting train is one of the most important factors, with which passenger demand forecasting or economic feasibility analysis will be done. This paper evaluates the speed limitation of tilting train around curves and also presents calculation process of its simulated possible running time. Then the adequacy of estimated time is verified with running time for Korean protype tilting train TTX (Tilting Train eXpress) by actual test run. As a case study, the estimated running time for the production version of tilting train and its time saving are presented compared with 2012's conventional Saemaul trains and non-tilting trains on the Gyeongbu line in the Korean rail network.