• 공업화학
• /
• 제9권1호
• /
• pp.1-5
• /
• 1998

올리고머형 음이온성 계면활성제로서 소수성인 측쇄알킬기의 탄소수와 중합도가 다른 말레인산디에틸에스테르계(CmD-Na계) 또는 무수말레인산계(CmM-Na계)와 탄소수가 $C_4{\sim}C_{16}$인 알킬비닐에테르 공중합물을 분산제로 사용하여 분산이 잘 안되는 ${\alpha}-$나 ${\beta}-$형 copper phthalocyanine과 카본블랙의 미립자에 대하여 수용액중에서의 분산성을 비교검토 하였다. 그 결과 CmD-Na계의 측쇄알킬기의 탄소수가 $C_4{\sim}C_{10}$인 경우에는 0.01~0.1% 농도범위에서 우수한 분산효과를 나타내었고, 특히 측쇄알킬기가 안료입자 표면으로의 배향흡착에 중요한 역할을 하며, 중합도가 낮은 것이 효과적으로 나타났다. 그러나 카본블랙인 경우에는 이와 무관한 결과를 나타내었다.

• Journal of Welding and Joining
• /
• 제33권2호
• /
• pp.8-13
• /
• 2015

This study was carried out to evaluate mechanical properties of the jointed Al6061/HT590 alloys by friction stir welding (FSW). FSW was conducted under the conditions with tool rotating speed of 500 RPM and traveling speed of 300 mm/min., where Ar gas was introduced to prevent the materials from corrosion during the welding process. Electron back-scattering diffraction (EBSD) was used to characterize microstructures such as grain size, misorientation angle and crystal orientation. Evolution of intermetallic compounds in Al6061 during the process were examined in terms of morphology, size and aspect ratio at three distinct zones Al base material, heat affected zone and stir zone, where transmission electron microscope (TEM) was used. It was revealed that FSW gave rise to refinement of grains as well as growth of intermetallic compounds in Al6061. The morphological changes of intermetallic compounds exerted an influence on mechanical properties, resulting in occurrence of fracture in the part of the base material instead of the jointed parts (heat affected zone and stir zone). This study systematically evaluated the microstructural evolutions during the FSW for joining Al6061 with HT590 and their effect on mechanical properties.

• 한국정보통신학회논문지
• /
• 제17권9호
• /
• pp.2199-2205
• /
• 2013

현대사회에서 영상처리는 스마트폰, 디지털 카메라, 디지털 TV 등의 여러 디지털 기기에 응용되고 있다. 영상처리 분야 중에서 에지 검출은 영상처리과정에 중요한 부분이다. 영상 에지는 배경과 물체 사이에서 화소값이 급격히 변화하는 지점이며, 크기, 위치, 방향 등의 중요한 정보를 포함한다. 기존의 에지 검출 방법은 크기가 작은 가중치 마스크를 이용하여 에지를 검출하기 때문에, AWGN(additive white Gaussian noise)에 훼손된 영상의 에지 검출 결과가 다소 미흡하다. 따라서 본 연구에서는 AWGN 환경에서 효과적으로 에지를 검출하기 위해, 마스크 영역의 범위를 넓혀 각 영역에 따른 새로운 화소를 추정한 후, 추정된 마스크를 벡터로 변환하여 정렬한 후 계산된 기울기로 에지를 검출하는 알고리즘을 제안하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.466-471
• /
• 2014

The interior vehicle noise due to the exterior aerodynamic field is an important topic in the acoustic design of a car. The air flow detached from the A-pillar and impacting the side windows are of particular interest as they are located close to the driver / passenger and provides a lower insulation index than the trimmed car body parts. This paper presents a numerical analysis method for a simplified vehicle model. The internal air cavity including trim component are included in the simulation. The car body includes the windshield and two side windows. The body is made of aluminum and trimmed with porous layers. The methodology proposed in this paper relies on two steps: the first step involves the computation of the exterior flow and turbulence induced non-linear acoustic field using PowerFlow. The second step consists in the computation of the vibro-acoustic transmission through the window using the finite element vibro-acoustic solver Actran. Additionally in order to validate the numerical process, an experimental set-up has been created based on the simplified vehicle. The vibration of the windshield and windows, the total wind noise level results and the relative contributions of the different windows are then presented and compared to measurements. The influence of the flow yaw angle (different wind orientation) is also assessed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.592-599
• /
• 2004

Talus topography is that weathered rock clasts were accumulated dropping in steep slope to action of gravity. Rock fall talus is formed by the accumulation of rock debris falling as individual particles from a cliff. If the collapse is produced in talus slope. it will be possible the loss of manpower and country. Despite correct access about talus is required, domestic research was scientific access about talus short because of short resolution of aerophoto and difficulties of research about huge talus. In this Study, Our research team analgize the wetness index using the geomorphogical data. Lineament through wetness index is simillar with distribution of the talus. And, the aim of the present study is to review and compare fabric data derived from rock fall talus about orientation, distribution and morphology. These deposits tend to have approximately equal amounts of clasts oriented parallel and perpendicular to the dip direction of the slope. And, platy- shaped clasts dominate the proximal and intermediate parts of the talus, wheres blocky-shaped clasts is more common in the distal part. we carry out Rock Fall Simulation. And, We install criteria of the rockfall protective barrier using talus and geomorphological characteristics.

• 한국정밀공학회지
• /
• 제15권2호
• /
• pp.124-133
• /
• 1998

This paper describes a research work of developing a computer-aided design of blanking and piercing for irregular-shaped sheet metal products. An approach to the development of compact and practical CAB system is based on the knowledge-based rules. Knowledge for the CAD system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer. Based on knowledge-based rules, the system, STRT-DES, is designed by considering several factors, such as complexities of blank geometry and punch profile, availability of press equipment and standard parts, utilization ratio which minimizes the scrap in a single or a pairwise operation, bridge width, grain orientation and design requirements which maximize the strength of the part when subsequent bending is involved. This system checks a forming feasibility with both internal and external features, a dimension of blanked hole, and a corner and a fillet radius for irregualrly shaped sheet metal products. Therefore this system can carry out a die design for each process which is obtained from results of an automated blank layout drawing with a best utilization ratio for irregular shape of product that was successful in production feasibility check module and those of an automated strip layout drawing and generate part drawings and the assembly drawing of die set in graphic forms.

• 보건행정학회지
• /
• 제24권4호
• /
• pp.396-412
• /
• 2014

Background: As a reform plan of health care system, Accountable Care Organization (ACO) has became an object of attention in the United States after Patient Protection and Affordable Care Act was enacted. ACO is a group of various health care providers and provide coordinated care to its assigned beneficiaries. If ACOs improve the quality level and reduce the cost of care, they can get financial incentives. Under the discussion for a quite long time and demonstration projects, ACO has been established. We aimed to analysis and discuss the history, policy mechanism, contents, status and outcomes of ACO. Also, we intended to suggest political implication Korean health care system with regard to ACO. Methods: We searched the articles related ACO in PubMed and selected several available papers about ACO. Total 56 studies were reviewed and categorized three parts; demonstration projects for formation of ACO, policy mechanism and agenda, empirical results of ACO performance. Results: As a result, establishment of ACO was successful partly in the US. It seems to be due to various project and pilot test for verification in the long time. The empirical effect of ACO was also identified in a few study but it needs more evidences to judge its positive effect. Conclusion: In Korea, there are arguments for the application of ACO. However it is difficult to implement a ACO by different political conditions between Korean and US. Nevertheless ACO proposed us the necessity of paradigm shift in our health policy and could be significant to national policy orientation in the future.

• 한국생활과학회지
• /
• 제20권2호
• /
• pp.327-338
• /
• 2011

In order to promote and comprehend marriage immigrants' culture, it is essential to understand the life of their families in their counties. For this study, data by a Philippine CFO(Commission on Filipino Overseas) has been analyzed, and the study researcher has attended an educational program run by the PDOS(Pre-Departure Orientation Seminar). Also, in order to understand the immigrants' families in their country, interviews have been done with some of the CFO employees, people arranged to immigrate to Korea through marriage, and female immigrants who are married. First, Filipino females have a positive attitude toward marriage with a foreign male. Most immigrants are from the rural parts of their country, and their families tend to rely on their daughters more than their sons. Therefore, they decide to marry Korean males and immigrate in order to support their families. However many of them do not have enough information about Korea. Second, Philippine's family system is of bilateral kinship, and traditionally, men and women are treated equally. Therefore, Filipino females tend to be well-educated, outgoing, and vibrant. Thus, they can create an active role in married life for themselves and support their family members. Lastly, based on videos and class materials on the topic of domestic violence that are used in the pre-educational programs for females planning to immigrate to Korea, the content of the program is to be revised.

• 한국통신학회논문지
• /
• 제16권5호
• /
• pp.434-444
• /
• 1991

조직 프로쎄싱을 위한 개선된 2-D QPS(Quadrature Polar Separable) 필터와 그의 응용이 본 논문에서 고찰된다. 필터의 주파수 응답은 2개의 독립된 귀불쌍 즉 PSS(Prolate Spheroidal Sequence)에 근거한 라디얼 웨이팅 함수와 Knutsson 필터에서의 방향각 함수에 의해 구성된다. 필터는 2개의 PSS로 구성되는 2-D Cartesian 필터에서와 같이 각 함수를 라디얼 웨이팅 함수에 근사화 시키기 때문에 에너지 손실면에서 최적화되며, 설계명제 조건이 대역폭, 방향각, 그리고 중심 주파수에만 의존하므로 제어하기가 쉽다. 또한 주파수 영역에서 Knutsson 필터보다 순환적 대칭 특성을 갖는다. 주파수 영역에서 로칼 조직의 방향과 주파수 성분을 평가하기 위하여, 조직합성, 방향각 측정, 그리고 조직 세그멘테이션과 같은 몇가지 응용이 고찰된다.

• 재활복지공학회논문지
• /
• 제9권2호
• /
• pp.129-135
• /
• 2015

본 연구에서는 3차원 영상처리와 노팅험 스케일을 이용하여 안면마비 평가 시스템을 개발하였다. 시스템은 측정부, 영상처리부, 연산부, 그리고 안면마비 평가 및 출력부로 구성되어 있다. 두 개의 웹캠을 사용하여 안면부의 8곳에 부착된 마커의 3차원 위치를 계산하였으며, 이를 이용하여 노팅험 스케일을 계산하고 화면에 보여준다. 피험자의 자세변화와 측정방식이 노팅험 스케일에 미치는 영향을 조사하였다. 측정방식은 2차원과 3차원을 비교하였으며, 피험자자세는 정면응시와 $11^{\circ}$ 측면응시를 비교하였다. 측면응시한 피험자를 2차원 방식으로 측정한 경우의 오차가 가장 컸다. 3차원 측정방식이 피험자의 자세변화에 따른 오차에 가장 덜 민감하였다.