• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.554-557
• /
• 2002

In this paper, PDP driving circuit is designed to show the pattern of still-image with ADS (Address Display Separation) driving method. The designed circuits consist of three stages which are the image processing program, digital logic parts, and power circuits. The Image processing program is designed serial-communication with RS-232C using BASIC language. Digital logic parts design ADS driving signals with Xilinx FPGA and are simulated by ModelSim 5.5f. Power circuits convert output of digital logic parts into high voltage which panel is drived.

• Journal of the Korea Furniture Society
• /
• v.17 no.1
• /
• pp.55-62
• /
• 2006

This was a systemized bed consisted of storage units, a desk, a drawer, a sofa and a shelf. This bed system was not designed only for a certain age group of children but also for various age groups of children, since each parts of the bed can be sued separately. Separation of parts of the bed allowed children to decorate their own living space and gives them a chance to express their own feeling and thoughts by layout of parts. Design adopts the beauty of nature such as smoothly curve lines which are perfectly fit for the children's living space. The moving sofa located under the bed and the book shelf lead children to establish a pattern of reading habit. The draw and storage units offer nice space for keeping children's goods.

• Korean Journal of Food Science and Technology
• /
• v.15 no.1
• /
• pp.70-76
• /
• 1983

Separation of fructose from glucose-fructose mixture was studied by utilizing the solubility differences of both sugars in the mixed solvents of water and alcohols with or without the presence of NaCl and $CaCl_2$. Better separation of fructose was obtained in ethanol-water solvent than other solvent-water systems. The addition of NaCl to the ethanol-water solvent system improved the separation factor based on the relative composition of two sugars in the supernatant by twice. The change in feed composition from 50-50 mixture of glucose and fructose resulted in a worse separation factor. It was found in the present studies that the best separation of fructose (fructose 75%, glucose 25%) was achieved when NaCl and ethanol was slowly added to the solution containing 20% water, 40% fructose and 40% glucose to make up the final solution with the parts of ethanol 36 ml, water 4 ml, glucose 8 gm, fructose 8 gm and NaCl 0.25gm.

• Resources Recycling
• /
• v.17 no.6
• /
• pp.43-49
• /
• 2008

In this study, a scrap sorting system using a color recognition method has been developed to automatically sort out specified materials from a mixture, and its application as been examined in the separation of Cu and other non-ferrous metal parts from a mixture of iron scraps. The system is composed of three parts; measuring, conveying and ejecting parts. The color of scrap surface is recognized by the measuring part consisting of a line-scan camera, light sources and a frame grabber. The recognition is program-controlled by a image processing algorithms, and thus only the scrap part of designated color is separated by the use of air nozzles. In addition, the light system is designed to meet a high speed of sorting process with a frequency-variable inverter and the air nozzled ejectors are to be operated by an I/O interface communication with a hardware controller. In the functional tests of the system, its efficiency in the recognition of Cu scraps from its mixture with Fe ones reaches to more than 90%, and that in the separation more than 80% at a conveying speed of 25 m/min. Therefore, it is expected that the system can be commercialized in the industry of shredder makers if a high efficiency ejecting system is realized.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.5
• /
• pp.544-551
• /
• 2013

Recently high speed mixer, which is mixing, grinding, dispersion for liquid-liquid material, has been widely used several industries such as food, cosmetics, pharmaceuticals, fine chemicals, electronic material. This high speed mixer has a core element part called particle separation device. Particle separation device, which makes mixed liquid and liquid material using shear forces from a rotor and a stator, is a decisive factor in the distributed parts. In this study, we examined the velocity distribution of the two models of particle separation device using computation fluid dynamics, so that we were able to see the difference of the velocity distribution according to the shape. Also, by experiment, we observed that the use of rotor-screen type is deemed more suitable in case of accurately considering the effect of improving of the dispersibility through the circulation of the future.

• Textile Coloration and Finishing
• /
• v.17 no.4 s.83
• /
• pp.21-26
• /
• 2005

A combination separation system is composed of three parts, simple microfiltration unit for the pretreatment of real waste IPA, pervaporation unit with plate and frame type module(the effective membrane area 9,040$cm^2$), and simple ultrafiltration unit as a refiner. Utrafiltration module with hollow fiber membrane(MWCO 10,000) used to purify waste aqueous IPA solution. In addition, the flux of $CMPA-K^+$ composite membrane for waste aqueous IPA solution was very steady-state with long experiment time(30 days). And the standard deviation($\sigma$) was 0.152 and then the coefficient of variation($CV\%$)was 10.82 The IPA concentration on the membrane performance using pervaporation module system could be increased from $89.85wt(\%)$ to more than $99.90wt\%$ in about 8hr at operation temperature of $70^{\circ}C$ using the pervaporation module system. Therefore, a combination separation process system of simple filtration and pervaporation was very effective for the purpose of the IPA purification and reuse front industrial electronic components cleaning process.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.445-446
• /
• 2007

The goal of this paper is accuracy improvement of appearance inspection by using image separation average value matching method. The appearance inspection of various electronic products and parts has been executed by the eyesight of human. But inspection by eyesight can't bring about uniform inspection result. Because the appearance inspection result by eyesight of human is changed by condition of physical and spirit of the checker. So machine vision inspection system is currently used to many appearance inspection fields instead of the checker. However the inspection result of machine vision is changed by the illumination of workplace. Therefore we have used a average value matching in this paper for improvement of vision inspection accuracy and could increase inspection accuracy of vision system. In other words, we made an effort for elevation of vision inspection accuracy by making the identical image separation average value of reference image and input image. Also this system has been developed only using PC, CCD Camera and Visual C++ for universal workplace.

• Honam Mathematical Journal
• /
• v.35 no.4
• /
• pp.707-716
• /
• 2013

The present paper consists of two parts. Since the recent paper [4] proved that an Alexandroff $T_0$-space is a semi-$T_{\frac{1}{2}}$-space, the first part studies semi-open and semi-closed structures of the Khalimsky nD space. The second one focuses on the study of a relation between the LS-property of ($SC^{n_1,l_1}_{k_1}{\times}SC^{n_2,l_2}_{k_2}$, k) relative to the simple closed $k_i$-curves $SC^{n_i,l_i}_{k_i}$, $i{\in}\{1,2\}$ and its normal k-adjacency. In addition, the present paper points out that the main theorems of Boxer and Karaca's paper [3] such as Theorems 4.4 and 4.7 of [3] cannot be new assertions. Indeed, instead they should be attributed to Theorems 4.3 and 4.5, and Example 4.6 of [10].

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1717-1722
• /
• 2003

In this paper we developed flip-chip bonder using XY stage, liner-rotary actuator and vision system. We depicted the major parts of the developed flip-chip bonder. Then we discussed several problems and their solutions such as vision and motion control, pick-up module position accuracy, separation of chip from the blue taped hoop, etc. We used a post guide to improve the horizontal positional accuracy against the long arm. Also, we used an ejector module and synchronization technique for easy chip separation from the blue tape.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.675-678
• /
• 2017

In the present, various methods have been employed to obtain the lesser thrust loss. Numerical simulations have been carried out for optimizing the thrust vector control system. Thrust vector control based on coflowing shear layer is an effective method to control the primary jet direction in the absence of moving parts. Thrust vector in symmetric nozzles is acquired by secondary flow injections that result to boundary layer separation. The pressure in secondary flow inlet was varied to check the deflection angle of jet flow.