• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.1
• /
• pp.72-79
• /
• 2009

Recently, the internal combustion engines have focused on reducing the $CO_2$ gas in order to cope with severe regulations for fuel economy. Therefore, various new technologies have been developed. Among them, cooling system is spotlighted because it has great effect on fuel economy. In this study, we measured the friction losses of engine parts according to engine speed and oil temperature. We also obtained optimized oil temperature which has the minimum friction losses. Then, we selected optimized oil temperature range and gave informations of friction losses for each engine parts. In addition, we analyzed relationship between coolant temperature and oil temperature by using engine performance test system. From this experiment, we obtained the database for relationship between coolant temperature and oil temperature. Then, we found the optimal temperature about engine oil. We analyzed BSFC and exhaust emissions by controlling the high coolant temperture. If we controlled coolant temperature more higher, BSFC has a little difference but exhaust emissions such as THC and CO have reduced. By using these experimental results, we predicted that IC engine have more low fuel consumption and exhaust emissions by optimized cooling control strategy.

• International Journal of Reliability and Applications
• /
• v.3 no.1
• /
• pp.1-16
• /
• 2002

In reliability engineering, the bathtub-shaped hazard rates play an important role in survival analysis and many other applications as well. For the bathtub-shaped, initially the hazard rate decreases from a relatively high value due to manufacturing defects or infant mortality to a relatively stable middle useful life value and then slowly increases with the onset of old age or wear out. In this paper, we present a new two-parameter lifetime distribution function, called the Loglog distribution, with Vtub-shaped hazard rate function. We illustrate the usefulness of the new Vtub-shaped hazard rate function by evaluating the reliability of several helicopter parts based on the data obtained in the maintenance malfunction information reporting system database collected from October 1995 to September 1999. We develop the S-Plus add-in software tool, called Reliability and Safety Assessment (RSA), to calculate reliability measures include mean time to failure, mean residual function, and confidence Intervals of the two helicopter critical parts. We use the mean squared error to compare relative goodness of fit test of the distribution models include normal, lognormal, and Weibull within the two data sets. This research indicates that the result of the new Vtub-shaped hazard rate function is worth the extra function-complexity for a better relative fit. More application in broader validation of this conclusion is needed using other data sets for reliability modeling in a general industrial setting.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.1
• /
• pp.67-75
• /
• 2011

Pyomindaehwa is a study book written in Korean and it takes a form of an investigation document made up of a conversation between Chosen's castaways and an interpreter taking place in Naesirogawa and Satsuma on the south end of Kyushu, Japan in the 19th century. This book is in three volumes. Many terminologies such as timber parts, sail, rigging and equipment have been shown in the last volume, which is mainly about a repairing process of drifting ship. Especially, timber parts' terminologies including hull's term were schematized in Kumamoto Text(1854b). This study have attempted to find out Naval architectural clues helping estimate actual drifting ship's type and bulk on the evidence of the contents. Based on the studies, it is possible to presume the type of Korean boats and ships, which are similar with the ones from database of 21 traditional fishing boats in the report on Investigation of Korean fishing boats studied previously. This paper has shown the logical process of presumption of types of boats.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.4
• /
• pp.297-305
• /
• 2010

Medical image acquisition techniques such as CT and MRI have disadvantages in that the numerous time and efforts are needed. Furthermore, a great amount of radiation exposure is an inherent proberty of the CT imaging technique, a number of side-effects are expected from such method. To improve such conventional methods, a number of novel methods that can obtain 3D medical images from a few X-ray images, such as algebraic reconstruction technique (ART), have been developed. Such methods deform a generic model of the internal body part and fit them into the X-ray images to obtain the 3D model; the initial shape, therefore, affects the entire fitting process in a great deal. From this fact, we propose a novel method that can generate a 3D vertebraic generic model based on the statistical database of CT scans in this study. Moreover, we also discuss a method to generate patient-tailored generic model using the facts obtained from the statistical analysis. To do so, the mesh topologies of CT-scanned 3D vertebra models are modified to be identical to each other, and the database is constructed based on them. Furthermore, from the results of a statistical analysis on the database, the tendency of shape distribution is characterized, and the modeling parameters are extracted. By using these modeling parameters for generating the patient-tailored generic model, the computational speed and accuracy of ART can greatly be improved. Furthermore, although this study only includes an application to the C1 (Atlas) vertebra, the entire framework of our method can be applied to other body parts generally. Therefore, it is expected that the proposed method can benefit the various medical imaging applications.

• The Journal of the Korea Contents Association
• /
• v.14 no.6
• /
• pp.1-10
• /
• 2014

Through the development of internet mobile devices and online business activation, sensitive data of unspecified user is being easily exposed. In such an open business environment, the outflow of sensitive personal information has often been remarked on recently for which adoption of encryption solution for database became top priority in terms of importance. In 2011, government also legislated for the protection of personal information as an information network law, and is now applying the law to a variety of industries. Firms began to comply with these regulations by establishing various measures for protection of personal information and are now quickly introducing encryption solution to reinforce security of personal information they are managing. In this paper, I present architecture and technological parts that should be considered when introducing security solution.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.340-343
• /
• 2008

Recently, the construction industry is getting more complex and sophisticated having the characteristics of a mega project. Mega project pursues a value that can't be gained with an approach of seeing a project as just a simple sum of different parts but a mutual combination. Hence to reach the goal, program management is needed rather than project management. program management can be seen as a 'total project management' and for an efficient program management prompt support for decision making is required. However, the current supporting method can't fulfill the requirements, therefore, need a tool to support the decision making and a IETM is expected to take this role. Despite the a lot of expected advantages of IETM, it is still difficult to apply because of the frequent changes of information in specifications and laws. In this research, as part of developing a IETM, we aim to propose a system frame which is based on the analysis of processes of a project. Moreover, based on this frame, a database will be built to contribute towards the application of construction IETM in the domestic construction industry.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.3
• /
• pp.768-776
• /
• 1994

This paper describes computer-aided forging design for rib/web shaped parts. In manufacturing a part by means of forging process, the first step is to design the forging. This is done by modifying the given machined part geometry according to the requirements of the forging process. Traditionally, this is done by experienced forging designers using empirical forging design guidelines. Generally, it would be neither possible nor practical to develop a system which encompasses the design of all types of forgings. Accordingly, forging design can be simplified by considering critical two dimensional cross sections of the machined part geometry. This system is composed of three modules(process variable decision module, forging design module and redesign module) and each module is carried out in regular sequence. In the process variable decision module, first of all, the undercut is checked and modified, and then deep recesses and holes difficult to forge are eliminated. Also parting line, forging plane, forging plan view area, forging weight and maximum size(maximum height or width)are determined. In the forging design module, the magnitude of various allowances, draft angle, minimum web thickness, corner and fillet radius are determined and then geometry modification is performed. Finally, since the design rules and databases used in this system are based on parameters of the forging geometry, such as the trimmed forging plan area, forging weight, forging maxmum size, plausible estimates need to be made for these parameters. Therefore, in the re-design module, the design process is iterated until a satisfactory forging is obtained.

• Clinical and Experimental Pediatrics
• /
• v.61 no.8
• /
• pp.231-238
• /
• 2018

Purpose: Wasting and underweight are the 2 main indicators of children's undernutrition. We aimed to estimate the prevalence of undernutrition at the national level in Iran. Methods: We performed a search for original articles published in international and Iranian databases including MEDLINE, Web of Science, Google Scholar, Scopus, CINHAL (Cumulative Index to Nursing and Allied Health Literature), Scientific Information Database, Irandoc, Iranmedex, and Magiran during January 1989-August 2017. Seven keywords, in English and Persian, including malnutrition, protein energy malnutrition, growth disorders, underweight wasting, weight loss, children below 5 years old, and children, were used to search the databases. Results: Finally, 17 articles were included in the meta-analysis, based on which the prevalence of underweight and wasting in Iranian children were estimated to be 11% and 5%, respectively. The prevalence rates of underweight among children in the central, western, southern, and northern parts of Iran and at the national level were 24%, 5%, 20%, 17%, and 6%, respectively. The prevalence rates of wasting in the central, western, southern, and northern parts of Iran and at the national level were 9%, 4%, 11%, 5%, and 4%, respectively. Conclusion: Although the prevalence of underweight and wasting in Iran was low, some parts of the country showed high prevalence. The main reason behind this difference in the prevalence of malnutrition may be due to the level of development in different regions.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.10
• /
• pp.1108-1120
• /
• 1990

The present study is to develop an intelligent control system for flexible manufacturing system, which is suitable for a variety of manufacturing types with smaller production rates. The controller is designed to integrate heuristic rules with optimization techniques for loading as well as flow rate of parts and ultimately meeting performance indices. The control function implemented by an optimization technique is to calculate short term production rates of parts. The heuristic control determined by production rules requires knowledge base to evaluate selected loading alternatives according to short term production rate and current process information, and also to determine final decision pertaining to loading. In this case, the knowledge base is constructed using the rules for evaluating alternatives, decision criteria, and flow control of parts in manufacturing system. The database is formulated by means of managing and updating current process information. A graphic system to monitor current status of the function and operation of manufacturing system is developed, and computer simulation is carried out to evaluate the performance of the proposed controller.

• The korean journal of orthodontics
• /
• v.30 no.2 s.79
• /
• pp.245-260
• /
• 2000

The Objective of this research was to construct the multimedia database system that was necessary for the education of the practitioners and the students. To establish this system, there were technical problems as follows 1) The processing of the images, 2) The rapid processing of the information with the computer network, 3) The development of diagnosis tools, 4) The technique to establish the database system, 5) The link between the database system and the internet, and 6) The method to educate through many cases. The analysis for diagnosis and treatment planning were provided as two parts : model analysis and cephalometric analysis. As a model analysis, arch length discrepancy and Bolton tooth ratio were provided for the part of patient information. Cephalometric analyses were provided in the part of initial diagnosis. The Cephalometric analysis ver 2.0 and the PowerCeph pro 3.3.5 were used to show Tweed, Steiner and Jarabak analysis. In the main part, Kim's analysis and some measurements were added. In the post-treatment or retention part, we show the superimposition of the cephalometrics with which you can find the effectiveness of the various orthodontic treatment The address of this home page is "http://damis.snu.ac.kr/orthodontics"