• Journal of Korean Society on Water Environment
• /
• v.36 no.1
• /
• pp.48-54
• /
• 2020

This paper presents a screening protocol for the selection of solvents available for the solvent extraction desalination process. The desalination solvents hypothetically and theoretically require the capability of (1) Forming hydrogen bonds with water, (2) Absorbing some water molecules into its non-polar solvent layer, (3) Changing solubility for water-solvent separation, and (4) Rejecting salt ions during absorption. Similar to carboxylic acids, amine solvents are solvent chemicals applicable for desalination. The key parameter for selecting the potential solvent was the octanol-water partitioning coefficient (Kow) of which preferable value for desalination was in the range of 1-3. Six of the 30 amine solvents can absorb water and have a variable, i.e., temperature swing solubility with water molecule for water-solvent separation. Also, the hydrogen bonding interaction between solvent and water must be stronger than the ion-dipole interaction between water and salt, which means that the salt ions must be broken from the water and only water molecules absorbed for the desalination. In the final step, three solvents were selected as desalination solvents to remove salt ions and recover water. The water recovery of these three solvents were 15.4 %, 2.8 %, 10.5 %, and salt rejection were 76 %, 98 %, 95 %, respectively. This study suggests a new screening protocol comprising the theoretical and experimental approaches for the selection of solvents for the desalination method which is a new and challenges the desalination process in the future.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.1
• /
• pp.38-43
• /
• 1998

This study examined root growth and distribution under the direct seeding of rice cultivars developed in Korea, Japan, and the U.S. Cultivars from the U.S., especially 'M202' and 'Caloro', had a high ratio of the dry matter partitioning for root and top plant components. Caloro had high root and top growth. 'Koshihikari' from Japan showed the lowest ratio of R/T (root/total dry matter) due to the small amount of root and top plant growth. Most Japanese cultivars except transplanted 'Hatsuboshi' showed low ratio of R/T. Patterns of root distribution for each soil block were recorded by the root box-pin board method. Roots of all cultivars were distributed in blocks A, C, and E in the middle of box, i.e., just below the plant base. Roots of 'Dongjin', M202, and Caloro were distributed deeper than the others. Roots of transplanted Hatsuboshi developed much better than direct seeded Hatsuboshi. Total root weight density was highest in Caloro followed by Dongjin, 'Gancheok', 'Calrose', and the others. The root density of Caloro was twice as much as those of the others except Dongjin. According to cumulative percentages of root distribution on each soil layer, roots of most cultivars were distributed below 20cm. The U.S. cultivars showed vertically well developed root systems as compared to others. A large amount of roots were distributed in the top 15cm of soil layer for Hatsuboshi and Koshinikari, and their root systems appeared to be shallow. In contrast, the rates of root distribution in the top 10cm of soil layer were low for Dongjin, Calrose, and Caloro. These cultivars had relatively deep root systems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.2
• /
• pp.709-730
• /
• 2017

To address the challenge of unprecedented growth in mobile data traffic, ultra-dense network deployment is a cost efficient solution to offload the traffic over some small cells. The overlapped coverage areas of small cells create more than one candidate access points for one mobile user. Signal strength based user association in IEEE 802.11 results in a significantly unbalanced load distribution among access points. However, the effective bandwidth demand of each user actually differs vastly due to their different preferences for mobile applications. In this paper, we formulate a set of non-linear integer programming models for joint user association control and user demand guarantee problem. In this model, we are trying to maximize the system capacity and guarantee the effective bandwidth demand for each user by soft-association control with a software defined network controller. With the fact of NP-hard complexity of non-linear integer programming solver, we propose a Kernighan Lin Algorithm based graph-partitioning method for a large-scale network. Finally, we evaluated the performance of the proposed algorithm for the edge users with heterogeneous bandwidth demands and mobility scenarios. Simulation results show that the proposed adaptive soft-association control can achieve a better performance than the other two and improves the individual quality of user experience with a little price on system throughput.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2072-2078
• /
• 2011

In photovoltaic(PV) system, for obtaining maximum efficiency of solar power systems, the solar tracking system must be controlled to match position of the sun. In this paper, we design the solar tracking system to track movement of the sun using CdS sensor modules and to determine direction of the sun under shadow of directions. In addition, for an intelligent computation in tracking of the sun, a fuzzy controller is allocated to space avaliable for splitting area of fuzzy part for the fuzzy input space(grid-type fuzzy partition) in which a fuzzy grid partition divides fuzzy rules bases. As well, a simple model of solar tracking system is designed by two-axis motor control systems and the 8-direction sensor module that can measure shadow from CdS sensor modules by matching of axis of CdS modules and PV panels. We demonstrate this systems is effective for fixed location and moving vessels and our fuzzy controller can track the satisfactorily.

• Journal of Ginseng Research
• /
• v.40 no.3
• /
• pp.292-299
• /
• 2016

Background: We previously reported that two-phase partition chromatography between ginseng water extract and soybean oil efficiently eliminated pesticide residues. However, an undesirable odor and an unpalatable taste unique to soybean oil were two major disadvantages of the method. This study was carried out to find an alternative vegetable oil that is cost effective, labor effective, and efficient without leaving an undesirable taste and smell. Methods: We employed six vegetable oils that were available at a grocery store. A 1-mL sample of the corresponding oil containing a total of 32 pesticides, representing four categories, was mixed with 10% aqueous ginseng extract (20 mL) and equivalent vegetable oil (7 mL) in Falcon tubes. The final concentration of the pesticides in the mixture (28 mL) was adjusted to approximately 2 ppm. In addition, pesticides for spiking were clustered depending on the analytical equipment (GC/HPLC), detection mode (electron capture detector/nitrogen-phosphorus detector), or retention time used. Samples were harvested and subjected to quantitative analysis of the pesticides. Results: Soybean oil demonstrated the highest efficiency in partitioning pesticide residues in the ginseng extract to the oil phase. However, canola oil gave the best result in an organoleptic test due to the lack of undesirable odor and unpalatable taste. Furthermore, the qualitative and quantitative changes of ginsenosides evaluated by TLC and HPLC, respectively, revealed no notable change before or after canola oil treatment. Conclusion: We suggest that canola oil is an excellent vehicle with respect to its organoleptic property, cost-effectiveness and efficiency of eliminating pesticide residues in ginseng extract.

• Journal of Korean Neurosurgical Society
• /
• v.46 no.3
• /
• pp.245-251
• /
• 2009

Objective : The authors analyzed the effectiveness and therapeutic response of Novalis shaped beam radiosurgery for metastatic brain tumors, and the prognostic factors which influenced the outcome. Methods : We performed a retrospective analysis of 106 patients who underwent 159 treatments for 640 metastatic brain lesions between January 2000 and April 2008. The pathologies of the primary tumor were mainly lung (45.3%), breast (18.2%) and GI tract (13.2%). We classified the patients using Radiation Therapy Oncology Group Recursive Partitioning Analysis (RPA) and then analyzed the survival and prognostic factors according to the Kaplan Meier method and univariate analysis. Results : The overall median actuarial survival rate was 7.3 months from the time of first radiosurgery treatment while 1 and 2 year actuarial survival estimates were 31% and 14.4%, respectively. Median actuarial survival rates for RPA classes I, II, and III were 31.3 months, 7.5 months and 1.7 months, respectively. Patients' life spans, higher Karnofsky performance scores and age correlated closely with RPA classes. However, sex and the number of lesions were not found to be significantly associated with length of survival. Conclusion : This result suggests that Novalis radiosurgery can be a good treatment option for treatment of the patients with brain metastases.

• Research in Mathematical Education
• /
• v.22 no.4
• /
• pp.261-282
• /
• 2019

The research related to testing pupils' achievement in the field of Measurement and Measure in initial teaching of geometry points to an insufficient adoption of the basic components of the length measurement concept among pupils. In order to discover the cause, we looked at the basic components on which the procedure of measuring length using a ruler is based, highlighted the possibilities of introducing the procedure in measuring length, and determined pupils' achievement during the procedure of measuring length using a ruler. The research sample consisted of 145 pupils, out of which 72 were the 2^nd grade pupils and 73 were the 4^th grade pupils. A descriptive method was applied in the research. The technique we used was testing, and for the statistical data processing we used a χ² test. The results of the research show that, when drawing a straight line of a given length using a ruler, there is no statistical difference in achievement between the 2^nd and 4^th grade pupils, nor in the pupils' knowledge regarding drawing a ruler independently, while drawing a straight line of a given length using a "broken" ruler 4^th grade pupils are statistically better. The results of the research indicate that pupils' achievement is better in doing standard tasks than in non-standard ones, given that the latter require conceptual knowledge. The components of the concept of length measurement using ruler have not been sufficiently developed yet, and these include: zero-point, partitioning a measured object in a series of consecutive measurement units and their iteration. We shed more light on the critical stage in the procedure of length measurement - the transition from non-standard to standard units and the formation of the length measurement scale. For further research, we propose to look at the formation of the concept of length measurement using the ruler through all its components and their inclusion in the mathematics curriculum, as well as examining the correlation of pupils' achievement in the procedure of measuring length with their achievement in measuring area (and volume).

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.5 no.4
• /
• pp.224-231
• /
• 2012

In this paper, we introduce a fuzzy inference systems based on fuzzy c-means clustering algorithm for fuzzy modeling of nonlinear process. Typically, the generation of fuzzy rules for nonlinear processes have the problem that the number of fuzzy rules exponentially increases. To solve this problem, the fuzzy rules of fuzzy model are generated by partitioning the input space in the scatter form using FCM clustering algorithm. The premise parameters of the fuzzy rules are determined by membership matrix by means of FCM clustering algorithm. The consequence part of the rules is expressed in the form of polynomial functions and the coefficient parameters of each rule are determined by the standard least-squares method. And lastly, we evaluate the performance and the nonlinear characteristics using the data widely used in nonlinear process.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.6
• /
• pp.1407-1417
• /
• 1996

In recent researches on thread partitioning algorithms break a thread at the long latency operation and merge threads to get the longer threads under the given constraints. Due to this limitation, even a program with little parallelism is partitioned into small-sized threads and context-swithings occur frequently. In the paper, we propose another method array localization about the array name, dependence distance(the difference of accessed element index from loop index), and the element usage that indicates whether element is used or defined. Using this information we can allocate array elements to the node where the corresponding loop activation is executed. By array localization, remote accesses to array elements can be replaced with local accesses to localized array elements. As a resuit,the boundaries of some threads are removed, programs can be partitioned into the larger threads and the number of context switchings reduced.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.3
• /
• pp.153-159
• /
• 1989

This paper describes the algorithms employed in the preprocessing stage of the timing simulator, TSIM1.0, which is based on the Waveform Relaxation Method (WRM) at the CELL-level. The preprocessing stage in TSIM1.0 (1)partitions a given circuit into DC connected blocks (DCB's) (2) forms strongly connected circuts (SCC's) and (3) orders CELL's Also, the efficient waveform management technique for the WRM is described, which allows the overwriting of the waveform management technique for the WRM is described. which allows the overwriting of the waveform information to save the storage requirements. With TSIM1.0, circuits containing up to 5000 MOSFET's can be analyzed within 1 hour computation time on the IBM PC/AT. The simulation results for several types of MOS digital circuits are given to verify the performance of TSIM1.0.