• Fire Science and Engineering
• /
• v.25 no.6
• /
• pp.21-26
• /
• 2011

The purpose of this paper is to present the damage patterns of cellular phone (SCH_W830) batteries according to energy sources and have them utilized as data for the settlement of disputes between manufactures and consumers. The reliability was secured by maintaining the ambient temperature and humidity at $22{\pm}2^{\circ}C$ and 40~60 %, respectively. The voltage of the battery used for the tests was measured to be 4.18V between positive pole (+) and negative pole (-)(1), and 4.19 V between positive pole (+) and negative pole (-)(2). This study applied the Korean Industrial Standard (KS) to the flammability test of cellular phones due to a general flame applied to them and found that no damage occurred to the built-in battery even though the flame was applied to the cases of cellular phones for 30 seconds. From the results of immersing the cellular phones in the saline solution (NaCl, 0.9 %) for 180 seconds, it was found that there was a trace of carbonization and melting due to the heat caused by leaking current. It can be seen that when the cellular phones were heated for 70 seconds using a microwave oven (MWO), the areas containing the metal holder, recharging connector, antenna, etc., were melted and discolored and that other areas showed no particular problems. That is, while the external carbonization of cellular phones, built-in metals and dielectric materials, and damage and deformation of the battery terminal block, etc., occurred differently depending on the types of energy sources, the voltage showed comparatively constant characteristics. Therefore, it is thought to be possible to attribute the cause of damage to the battery by performing analysis taking into consideration comprehensively the characteristics of the flame spread pattern as well as the melting and deformation of metals.

• Membrane Journal
• /
• v.20 no.4
• /
• pp.278-289
• /
• 2010

A series of composite membranes based on sulfonated poly(arylene ether sulfone) (SPAES) were prepared via addition of tetraethyl orthosilicate (TEOS) and solution casting method. The morphological structure, water uptake, proton conductivity of the resulting composite membranes were extensively investigated as function of the content of TEOS. By the sol-gel reaction, TEOS molecules were not completely converted to $SiO_2$ particles, but formed only oligomer-type. Also, EDS confirms that the resulting silicon dioxide was homogeneously distributed in the composite membranes. As the content of TEOS increased, the prepared membranes increased water uptake and proton conductivity at high temperature and low relative humidity condition. In particular, considerably high proton conductivity (0.015 S/cm) at $120^{\circ}C$ and 48%RH was demonstrated in the composite membrane containing 200% TEOS, which is 10 times greater than that of unmodified SPAES membrane. Also, the composite membranes were found to have enhanced thermal stability compared to the unmodified membrane.

• Korean Journal of Environment and Ecology
• /
• v.29 no.6
• /
• pp.842-849
• /
• 2015

This study investigated the effects of rare-earth fertilizer on the shoot cuttings' rooting of Vitex rotundifolia L. and Tamarix chinensis Lour. The shoot cutting test was carried in 2008 and the main results are summarized as follows. The rate of rooting and the average roots increased in both number and length when rare-earth fertilizer is treated in V. rotundifolia and T. chinensis in comparison to those of the untreated control plot. In particular, when rare-earth fertilizer is diluted with water 1/2500, the rooting outstandingly increases. This result is almost similar to the effect of the rooting stimulant, IAA. Although there is no differentiation in its rooting rate according to the density, the rooting of T. chinensis shows a 100 percent effect on in the entire treated plot but not in the untreated control plot, so it is usable as a rooting stimulant. As for shoot cuttings' rooting, depending on the time immersed in diluted solution of rare-earth fertilizer, both V. rotundifolia and T. chinensis showed relatively higher percentages in all treatment plot immersed for 60 minutes than for 10 minutes. In conclusion, considering the results of the rooting percentage and the average number and length of roots of V. rotundifolia and T. chinensis, the shoot cuttings' rooting appeared higher in percentage when they were immersed in the rooting stimulant for sixty minutes with a lower density than 1/2500. This result shows that rare-earth fertilizer can be utilized as an alterative for IAA rooting stimulants currently available in the market.

• Journal of Korean Society of Archives and Records Management
• /
• v.20 no.1
• /
• pp.115-137
• /
• 2020

This study aims to examine the limitations of status that describe archives based on the Archival rules, and to propose a new method using the Records in Context - Conceptual model (RiC-CM) as a solution. Given this, the study conducted literature reviews and case studies. The solutions based on RiC-CM and its effects on the limitations of the existing environment are as follows. First, RiC-CM can describe multiple provenances about archives. This can be solved by defining individual records and provenances as "entity" and expressing their associations as relationships. The interrelation of entities alone can more accurately represent the information of provenances associated with a particular archive, making it easier to identify the overall context that makes records. Second, RiC-CM can link related files. Those that belong to a specific records group (fonds) can be resolved by assigning them to individual entities and making interrelation according to the context that makes records. This method makes it possible to serve information about the context that makes records. From the user's point of view, more options are available for searching records. Third, RiC-CM can link all relevant producer-made records related to a specific production organization. If organizations are related to each other, they can be defined as "entity," and their relationship can be expressed as "associated with." It helps to comprehensively examine the context of provenances. The findings of this study are expected to be used as a basis for future research on RiC-CM, in response to the paradigm shift for electronic records management systems.

• KSBB Journal
• /
• v.15 no.6
• /
• pp.649-657
• /
• 2000

The factors affecting the back-extraction efficiency of Bovine Serum Albumin (BSA, Mw. 65kDa, pl 4.9) solubilized in an AOT reverse micellar solution, prepared by the injection method, to an excess aqueous phase were investigated. In particular, the effects of pH, the types of salts, alcohols added as cosurfactants, and their concentrations in the aqueous phase were examined. Furthermore, by comparing the CD spectra of the back-extracted BSA and the feed BSA, the structural changes of BSA during the extraction process were determined. The addition of 1:1 salt such as KCl or NaCl to the aqueous phase resulted in almost a 100% extraction to the aqueous phase at a pH higher than its isoelectric point pl. This high efficiency of back-extraction might be due to the change in the interactions between the protein and micellar aggregates driven by the added salt. For 1:2 salts like $CaCl_2$ and $MgCl_2$, BSA was back-extracted with lower than 20% extraction efficiency. Maximum extraction efficiencies were attained at about pH=7 and pH=8 for monovalent and divalent salts, respectively. The addition of alcohols as cosurfactants led to an improvement in monovalent and divalent salts, respectively. From the CD spectra of BSA extracted to the aqueous phase, it was observed that denaturation of BSA was not significant. In certain back-extraction conditions, the extracted BSA showed even higher activity than the feed BSA.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.9
• /
• pp.828-840
• /
• 2014

There is a new evolution in technological advancement taking place called the Internet of Things (IoT). The IoT enables physical world objects in our surroundings to be connected to the Internet. For this idea to come to life, two architectures are required: the Sensing Entity in the environment which collects data and connects to the cloud and the Cloud Service that hosts the data. In particular, the combination of wireless sensor network for sensing and cloud computing for managing sensor data is becoming a popular intervention for the IoT era. The pharmaceutical cold chain requires controlled environmental conditions for the sensitive products in order for them to maintain their potency and fit for consumption. The monitoring of distribution process is the only assurance that a process has been successfully validated. The distribution process is so critical that anomaly at any point will result in the process being no longer valid. Taking the cold chain monitoring to IoT and using its benefits and power will result in better management and product handling in the cold chain. In this paper, Arduino based wireless sensor network for storage and logistics (land and sea) is presented and integrated with Xively cloud service to offer a real-time and innovative solution for pharmaceutical cold chain monitoring.

• Journal of the Korean Chemical Society
• /
• v.53 no.6
• /
• pp.653-662
• /
• 2009

Developing effective tools for predicting absorption, distribution, metabolism, excretion properties and toxicity (ADME/T) of new chemical entities in the early stage of drug design is one of the most important tasks in drug discovery and development today. As one of these attempts, support vector machines (SVM) has recently been exploited for the prediction of ADME/T related properties. However, two problems in SVM modeling, i.e. feature selection and parameters setting, are still far from solved. The two problems have been shown to be crucial to the efficiency and accuracy of SVM classification. In particular, the feature selection and optimal SVM parameters setting influence each other, which indicates that they should be dealt with simultaneously. In this account, we present an integrated practical solution, in which genetic-based algorithm (GA) is used for feature selection and grid search (GS) method for parameters optimization. hERG ion-channel inhibitor classification models of ADME/T related properties has been built for assessing and testing the proposed GA-GS-SVM. We generated 6 different models that are 3 different single models and 3 different ensemble models using training set - 1891 compounds and validated with external test set - 175 compounds. We compared single model with ensemble model to solve data imbalance problems. It was able to improve accuracy of prediction to use ensemble model.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.12 no.4
• /
• pp.73-84
• /
• 2017

This study started from searching for cause and solution of the part where online shopping malls are easy to start but easy to choose. It is thought that online shopping mall business has sufficient merit in the situation of Korea which is rapidly spreading internet, and it started from the opinion that if it can strengthen the characteristics of successful business start-ups, it can increase the rate of failure and reduce the failure rate. Internet shopping mall education experts gathered and discussed in depth what is the way in which mall entrepreneurs can maintain business continuously. As a result of summarizing the opinions of many shopping mall experts, we concluded that the marketing capabilities of each company should be strengthened. In addition, the importance of entrepreneurship education has emerged. In particular, it has been concluded that strengthening the competence of marketing mix is an important factor that determines the success and failure of the company. In this case, the researchers started to study this question with the question of what factor of marketing 4P has the greatest influence on the success of start-up. I also decided to study the impact of entrepreneurship education. As a result of this study, marketing mix ability as an independent variable has a significant positive effect on the success of entrepreneurship. Especially, the effect of product mix among 4Ps is significant for successful entrepreneurship.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.412-417
• /
• 2015

The IMO MEPC has been increasingly strengthening the emission standard for marine environment protection. In particular, nitrogen oxide (NOx) emissions of all ocean-going ships built from 2016 will be required to comply with the Tier-III regulation. In this study, a vanadia based SCR (Selective Catalytic Reduction) system developed for ship application was installed on a diesel engine for power generation of the training ship T/S SAENURI in Mokpo National Maritime University. For the present study, the exhaust pipeline of the generator diesel engine was modified to fit the urea SCR system. This study investigated the NOx reduction performance according to the two kind of injection method of urea solution (40%): Auto mode through the PLC (Programable Logic Control) and Manual mode. We were able to find the ammonia slip conditions when in manual mode method. So, the optimal urea injection quantity can be controlled at each engine load (25, 35, 50%) condition. It was achieved 80% reduction on nitrogen oxide. Furthermore, we found that the NOx reduction performance was better with the load up-down (while down to 25% from 50%) than the load down-up (while up to 50% from 25%) test.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.4
• /
• pp.409-417
• /
• 2014

Since the oil price has been significantly jumped for recent some years, the diesel engine of the merchant ship has been mainly used the heavy oil of low quality. Thus, it has been often exposed to severely corrosive environment more and more because temperature of the exhaust gas in a combustion chamber is getting higher and higher with increasing of using the heavy oil of low quality. As a result, wear and corrosion of most parts surrounded with combustion chamber is more serious compared to the other parts of the engine. Therefore, an optimum weldment for these parts is very important to prolong their lifetime in a economical point of view. In this study, four types of filler metals such as Inconel 625, 718, 1.25Cr-0.5Mo and 0.5Mo were welded with SMAW and GTAW methods in the forged steel which would be generally used with piston crown material. And the corrosion properties of weld metal, heat affected zone and base metal were investigated using electrochemical methods such as measurement of corrosion potential, anodic polarization curves, cyclic voltammogram and impedance etc. in 35% H2SO4 solution. The weld metal and base metal exhibited the best and worst corrosion resistance in all cases of filler metals. In particular, the weld metal welded with filler metals of Inconel 718 revealed the best corrosion resistance among the filler metals, and Inconel 625 followed the Inconel 718. Hardness relatively indicated higher value in the weld metal compared to the base metal. Furthermore, Inconel 625 and 718 indicated higher values of hardness compared to 1.25cr-0.5Mo and 0,5Mo filler metals in the weld metal.