• 미생물학회지
• /
• 제30권1호
• /
• pp.65-69
• /
• 1992

It is proposed the polyacrylamide gel, instead of agar, could be used for the solid cultures of microorganisms including Streptomyces strains. Polymerization and gellation of 5% acrylamide solution were done by autoclaving for 5 min at 121.deg.C and no hindered by the addition of nutrient-rich media. In particular, pH buffer solution suitable for corresponding microorganisms must be used in the preparation of culture media. Comparing with agar, it was discussed that polycrylamide gel had many advantages such as gellation within the wide range of strong acid Carbon and Nitrogen sources, requirement tests of growth factors and minerals, sterization at high temperature, diffusion assays of products depending on the pore size of gel, and stability and standarization of microbial cultures.

• 한국수학교육학회지시리즈C:초등수학교육
• /
• 제2권1호
• /
• pp.27-35
• /
• 1998

연구는 한국 유치원의 수학 교육의 문제점을 분석하고, 유치원 교육의 문제에 대한 해결 방안을 찾는데 그 목적이 있다. 특히, 유아 수학 교육에서 사용되는 교구에 대한 효과와 보유 현황에 대한 조사에서 현재 유치원 현장에서 근무하는 교사들의 가장 큰 애로점을 알 수 있었다. 교구의 효과가 다른 어느 때보다 절대적으로 영향을 미치는 유아의 시기에 풍부한 교구의 활용은 수학교육 뿐만 아니라 여러 방면에서 필요로 하고 있다. 그러나, 현실적으로 많은 부족함을 느끼며 얼마 안 되는 교구도 교사가 직접 제작해야하는 실정으로 되어 있어 교사들의 어려움을 더해주고 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1991년도 춘계학술대회 논문집
• /
• pp.158-165
• /
• 1991

DC servo motors have small torques compared to their weight. In order to reduce the speed and increase the output torque of the DC motor, a gear box is commonly used. The use of a gearbox, however, imposes limitations onmany applications because of the backlash and the reduction in transmission efficiency. Furthemore, the elastic deformation or the compliance of the gearbox decreases the accuracy of the servo mechanism and the stability of the system. In view of the many disadvantages in using the gearbox, a more effective solution has to be found. The solution is the direct drive mechanism. There are many kinds of direct drive motors. I will consider the ultrasonic motor in particular.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권8호
• /
• pp.2840-2853
• /
• 2015

A major challenge in network service providers is to provide adequate resources in service level agreements based on forecasts of future demands. In this paper, we address the problem of capacity provisioning in a network subject to demand uncertainty such that a network coded multicast is applied as the data delivery mechanism with limited budget to purchase extra capacity. We address some particular type of uncertainty sets that obtain a tractable constrained capacity provisioning problem. For this reason, we first formulate a mathematical model for the problem under uncertain demand. Then, a robust optimization model is proposed for the problem to optimize the worst-case system performance. The robustness and effectiveness of the developed model are demonstrated by numerical results. The robust solution achieves more than 10% reduction and is better than the deterministic solution in the worst case.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.927-930
• /
• 2009

We studied the solution processes of IGZO thin films and investigated the electrical characteristics of thin film transistor (TFT) with sol-gel processed InGaZn-oxide active semiconductor layer. In particular, the effect of composition variation and post annealing temperature were studied by using solutions having various metal cation ratios to optimize transistor performance.

• Structural Engineering and Mechanics
• /
• 제42권1호
• /
• pp.1-12
• /
• 2012

In this study, Pasternak foundation model, which is a two parameter foundation model, is used to analyze the behavior of laterally loaded beams embedded in semi-infinite media. Total potential energy variation of the system is written to formulate the problem that yielded the required field equations and the boundary conditions. Shear force discontinuities are exposed within the boundary conditions by variational method and are validated by photo elastic experiments. Exact solution of the deflection of the beam is obtained. Both foundation parameters are obtained by self calibration for this particular problem and loading type in this study. It is shown that, like the first parameter k, the second foundation parameter G also depends not only on the material type but also on the geometry and the loading type of the system. On the other hand, surface deflection of the semi infinite media under singular loading is obtained and another method is proposed to determine the foundation parameters using the solution of this problem.

• 충청수학회지
• /
• 제27권3호
• /
• pp.475-477
• /
• 2014

Lee and Lim (2009) state three characterizations of Loamax, exponential and power function distributions, the proofs of which, are based on the solutions of certain second order non-linear differential equations. For these characterizations, they make the following statement : "Therefore there exists a unique solution of the differential equation that satisfies the given initial conditions". Although the general solution of their first differential equation is easily obtainable, they do not obtain the general solutions of the other two differential equations to ensure their claim via initial conditions. In this very short report, we present the general solutions of these equations and show that the particular solutions satisfying the initial conditions are uniquely determined to be Lomax, exponential and power function distributions respectively.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 봄 학술발표회 논문집
• /
• pp.3-10
• /
• 1997

Meshless particle method is a numerical technique which does not use the concept of element. This method can easily handle special engineering problems which cause difficulty in the use of finite element method, however it has a drawback that essential boundary condition is not satisfied. In this paper, several studies for satisfying essential boundary conditions and enhancing the accuracy of solutions are discussed. Particular emphasis is placed on a new numerical technique in which finite elements are used on the boundaries to satisfy the essential boundary conditions and meshless particle method is used in the interior domain. For coupling of the two methods interface elements are introduced into the zone between the subdomains using meshless particle method and finite element method. The shape functions and the approximated displacement functions of the interface element are derived with the ramp function based on the shape function of finite elements. The whole numerical procedures are formulated by Galerkin method. Several numerical examples for enhancing the accuracy of solution in the meshless particle method and a new coupling method are presented.

• Structural Engineering and Mechanics
• /
• 제58권4호
• /
• pp.719-729
• /
• 2016

The main objective of the present paper is to study the effect of the yield criterion on the magnitude of the strain rate and plastic work rate intensity factors in axisymmetric flow of isotropic incompressible rigid perfectly plastic material by means of a problem permitting a closed-form solution. The boundary value problem consisting of the axisymmetric deformation of a plastic tube is solved. The outer surface of the tube contracts. The radius of the inner surface does not change. The material of the tube obeys quite a general yield criterion and its associated flow rule. The maximum friction law is assumed at the inner surface of the tube. Therefore, the velocity field is singular near this surface. In particular, the strain rate and plastic work rate intensity factors are derived from the solution. It is shown that the strain rate intensity factor does not depend on the yield criterion but the plastic work rate intensity factor does.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권4호
• /
• pp.770-783
• /
• 2015

Lately, high production rate welding processes for Al alloys, which are used as LNG FPSO cargo containment system material, have been developed to overcome the limit of installation and high rework rates. In particular, plasma-metal inert gas (MIG) hybrid (PMH) welding can be used to obtain a higher deposition rate and lower porosity, while facilitating a cleaning effect by preheating and post heating the wire and the base metal. However, an asymmetric undercut and a black-colored deposit are created on the surface of PMH weld in Al alloys. For controlling the surface defect formation, the wire feeding speed and nozzle diameter in the PMH weld was investigated through arc phenomena with high-speed imaging and metallurgical analysis.