• 제목/요약/키워드: Particles of 3-5 μm

검색결과 6건 처리시간 0.017초

Size Determination of Pollens Using Gravitational and Sedimentation Field-Flow Fractionation

  • Kang, Dong-Young;Son, Min-Seok;Eum, Chul-Hun;Kim, Won-Suk;Lee, Seung-Ho
    • Bulletin of the Korean Chemical Society
    • /
    • 제28권4호
    • /
    • pp.613-618
    • /
    • 2007
  • Pollens are known to be an allergen. They penetrate human respiratory system, triggering a type of seasonal allergic rhinitis called pollen allergy (hey fever). The purpose of this study is to test two field-flow fractionation (FFF) techniques, gravitational FFF (GrFFF) and sedimentation FFF (SdFFF), for their applicability to sizecharacterization of micron-sized pollens. Both GrFFF and SdFFF are elution techniques, providing sequential elution of particles based on size. They allow the size distribution as well as the mean size of the sample to be determined from the elution time. In this study, GrFFF and SdFFF were used to determine the size distribution of Paper Mulberry and Bermuda Grass pollens. For the Paper Mulberry pollen, the mean size obtained by GrFFF is 12.7 μm, and agrees rather well with the OM data with the relative error of 8.0%. For the Bermuda Grass pollen, the mean size obtained by GrFFF is 32.6 μm with the relative error of 12.3%. The mean sizes determined by SdFFF are 12.4 (relative error = 10.1%) and 27.1 μm (relative error = 5.2%) for the Paper Mulberry and the Bermuda Grass pollen, respectively. Although SdFFF tends to yield more accurate size distribution due to lower band broadening under the field strength higher than 1 G, the sizes determined by GrFFF were not significantly different from those by SdFFF.

Microstructure, Electrical Property and Nonstoichiometry of Light Enhanced Plating(LEP) Ferrite Film

  • 김 돈;이충섭;김영일
    • Bulletin of the Korean Chemical Society
    • /
    • 제19권5호
    • /
    • pp.533-539
    • /
    • 1998
  • A magnetic film was deposited on a slide glass substrate from aqueous solutions of $FeCl_2$ and $NaNO_2$ at 363 K. XRD analysis showed that the film was polycrystalline magnetite $(Fe_{3(1-{\sigma})}O_4)$ without impurity phase. The lattice constant was 0.8390 nm. Mossbauer spectrum of the film could be deconvoluted by the following parameters: isomer shifts for tetrahedral $(T_d)$ and octahedral $(O_h)$ sites are 0.28 and 0.68 mm/s, respectively, and corresponding magnetic hyperfine fields are 490 and 458 kOe, respectively. The estimated chemical formula of the film by the peak intensity of Mossbauer spectrum was $Fe_{2.95}O_4$. Low temperature transition of the magnetite (Verwey transition) was not detected in resistivity measurement of the film. Properties of the film were discussed with those of pressed pellet and single crystal of synthetic magnetites. On the surface of the film, magnetite particles of about 0.2 μm in diameter were identified by noncontact atomic force microscopy (NAFM) and magnetic force microscopy (MFM).

Vector Passive Harmonic Mode-locking Fiber Laser Based on Topological Insulator Bi2Se3 Interacting with Fiber Taper

  • Li, Jian Ping
    • Journal of the Optical Society of Korea
    • /
    • 제20권1호
    • /
    • pp.135-139
    • /
    • 2016
  • I propose a vector passive harmonic mode-locked fiber laser based on topological insulator Bi2Se3 interacting with a fiber taper with a diameter of 7 μm. The particles of topological insulator are deposited uniformly onto the fiber taper with light pressure effect. By incorporating the fabricated saturable absorber into an Er-doped fiber laser cavity, stable mode-locked fiber is obtained. Due to the intense evanescent field of the fiber taper, strong confinement of light enhances the nonlinearity of the laser cavity, and passive harmonic mode-locking is performed. I observe a maximum harmonic mode-locking of 356th, corresponding to a frequency of 3.57 GHz. The pulse duration is 824 fs, and the full width at half maximum of the spectrum is about 8.2 nm. The polarization dependent loss of the saturable absorber is ~ 2.5 dB in the wavelength range of the C band. As the cavity contains no other polarization dependent device, the mode-locked laser is functioning in the vector state. The harmonic order vs pump power is investigated. To the best of our knowledge, this report is the highest frequency mode-locked fiber laser based on Bi2Se3. Experimental results indicate that the topological insulator Bi2Se3 functioning with a thin fiber taper is effective for vector harmonic mode-locking.

충격파를 이용한 레이저 어블레이션 기반의 마이크로 입자 가속 시스템 개발 및 약물전달 응용 (Development of shock wave induced microparticle acceleration system based on laser ablation and its application on drug delivery)

  • 최지혜;;이현희;여재익
    • 한국항공우주학회지
    • /
    • 제36권6호
    • /
    • pp.587-593
    • /
    • 2008
  • 본 연구의 목적은 신체 조직의 손상을 최소화할 수 있는 경피(transdermal) 및 국부적인(topical) 약물전달을 가능하게 하는 마이크로 입자가속시스템 개발에 있다. Ballistic 역학을 기반으로 하는 본 방법을 통하여 체순환을 위한 경피 및 국부적 약물 전달이 가능하다. 얇은 금속 포일의 한 쪽 면에 마이크로 입자들을 얹어놓고 뒷면에 레이저를 조사하면 충격파가 발생하고, 이 충격파는 포일을 통과하며 포일의 끝에서 금속-공기간의 acoustic impedance 차이로 expansion wave로 반사되어 포일이 반대 방향으로 변형을 일으키게 한다. 이 순간적인 변형으로 인해 포일에 붙어있던 마이크로 입자들이 가속되어 튕겨 나가게 된다. 입자들이 가속되는 속도가 굉장히 크기 때문에 이들은 신체 조직을 침투할 만한 충분한 운동량을 갖고 있다. 입자들의 침투 여부를 확인하기 위해 우리는 5${\mu}m$ 크기의 코발트 입자들을 연조직을 묘사하는 젤라틴에 가속시켰으며, 주목할 만한 침투 깊이를 얻으며 실험에 성공하였다.

Effects of Silver Treatment and the Physical and Chemical Properties of Spherical Activated Carbon

  • Oh, Won-Chun;Kim, Jong-Gyu;Kim, Hyuk;Chen, Ming-Liang;Zhang, Kan;Meng, Ze-Da;Zhang, Feng-Jun
    • 한국재료학회지
    • /
    • 제19권11호
    • /
    • pp.569-575
    • /
    • 2009
  • In this study, the effects of silver treatment and activation on the physical and chemical properties of spherical activated carbon (SAC) were studied. The textural properties of SAC were characterized by BET surface area, XRD, SEM, iodine adsorption, strength intensity, pressure drop and antibacterial effects. BET surface areas of SACs decreased with an increase of the amount of PR before and after activation, and the BET surface areas of SACs were found to be about 2-3 times the size of those before activation. The XRD patterns showed their existing state as stable Ag crystals and carbon structure. The Ag particles are seaweedlike and uniform, being approximately 5-10 μm in size deposited on the surface of activated carbon. All of the samples had much more iodine adsorption capability after activation than before activation. The strength values of SACs increased with an increase of the amount of PR, and there was a smaller drop in the strength values of SACs with silver treatment than with non-silver treatment after activation. The Ag-SAC composites showed strong antibacterial activity against Escherichia coli (E. Coli).