• Applied Biological Chemistry
• /
• 제38권1호
• /
• pp.20-25
• /
• 1995

돼지감자 분말을 원료로 에탄올 생산성을 향상시키기 위한 전실험으로 Kluyveromyces marxianus FO43을 고정화시켜 sucrose 배지에 고정화 조건과 발효조건을 조사한 결과 alginate 농도는 2%, bead 직경 2 mm, 고정화 균주의 배양기간 24시간, particle input ratio of 30 : 100, 기질농도 10%(w/v), pH와 온도는 각각 5.5, $40^{\circ}C$가 최적으로 나타났으며 pH $4.5{\sim}6.5$, 온도 $30{\sim}45^{\circ}C$에서 높은 농도의 에탄올을 생성하여 고정화하지 않은 효모보다 넓은 pH와 온도 안정성을 보였다. 최적조건에서 회분발효를 실시한 결과 에탄올 농도는 46.4 g/L, 에탄올 생산성은 1.93 g/L.h이었고 최적조건에서 배양된 bead의 단면을 위상차 현미경으로 관찰해 본 결과 균주세포가 bead의 표면에 밀집되어 있었다.

• 한국조리학회지
• /
• 제23권8호
• /
• pp.153-162
• /
• 2017

Bacillus coagulans was added as probiotics in instant coffee with microground roasted coffee which is recently rising premium coffee and the instant coffee (ProBio coffee) was compared with 3 commercial instant coffees with microground roasted coffee in quality characteristics to understand the competitiveness of ProBio coffee. In sensory evaluation, ProBio coffee had inferior aroma intensity and overall acceptance compared with control group (brewed coffee) (p<0.05) but it had equal quality or more compared with 3 commercials. Total polyphenol content, chlorogenic acid content, DPPH free radical scavenging activity and caffeine content were $110.72{\pm}1.99mg/g$, $2,700{\pm}20mg/g$, $146.22{\pm}3.62TEAC\;mg/g$, $28.1{\pm}3.2ppm$ respectively. In general quality characteristics, water content, solubility, particle size and particle strength of ProBio coffee were similar to general instant coffee but had darker color than it. In safety assessment, acrylamide content was $502{\pm}10ppb$, and residual pesticides and ochratoxin A were not detected. Over 70% of B. coagulans were maintained in 4 months of storage and 16 months of shelf life was predicted in ProBio coffee by $Q_{10}$ model. Therefore, ProBio coffee was confirmed to have a sufficient product competiveness compared with 3 commercials.

• 천문학회지
• /
• 제45권5호
• /
• pp.127-138
• /
• 2012

We explore how wave-particle interactions affect diffusive shock acceleration (DSA) at astrophysical shocks by performing time-dependent kinetic simulations, in which phenomenological models for magnetic field amplification (MFA), Alfv$\acute{e}$nic drift, thermal leakage injection, Bohm-like diffusion, and a free escape boundary are implemented. If the injection fraction of cosmic-ray (CR) particles is ${\xi}$ > $2{\times}10^{-4}$, for the shock parameters relevant for young supernova remnants, DSA is efficient enough to develop a significant shock precursor due to CR feedback, and magnetic field can be amplified up to a factor of 20 via CR streaming instability in the upstream region. If scattering centers drift with Alfv$\acute{e}$n speed in the amplified magnetic field, the CR energy spectrum can be steepened significantly and the acceleration efficiency is reduced. Nonlinear DSA with self-consistent MFA and Alfv$\acute{e}$nic drift predicts that the postshock CR pressure saturates roughly at ~10 % of the shock ram pressure for strong shocks with a sonic Mach number ranging $20{\leq}M_s{\leq}100$. Since the amplified magnetic field follows the flow modification in the precursor, the low energy end of the particle spectrum is softened much more than the high energy end. As a result, the concave curvature in the energy spectra does not disappear entirely even with the help of Alfv$\acute{e}$nic drift. For shocks with a moderate Alfv$\acute{e}$n Mach number ($M_A$ < 10), the accelerated CR spectrum can become as steep as $E^{-2.1}$ - $E^{-2.3}$, which is more consistent with the observed CR spectrum and gamma-ray photon spectrum of several young supernova remnants.

• 한국결정성장학회지
• /
• 제6권3호
• /
• pp.463-470
• /
• 1996

알파 알루미나와 철이 첨가된 티타니아 최종층으로 구성된 세라믹 여과막을 졸-겔방법으로 제조하였다. 철이 첨가된 지지 티타니아 복합여과막은 지지체를 혼합졸에 침지하여 제조하였다. 복합여과막을 $550^{\circ}C$에서 $850^{\circ}C$까지 열처리온도에 따르는 미세구조 변화를 주사전자현미경으로 조사하였다. $650^{\circ}C$에서 1시간 소결한 경우, 철이 첨기된 티타니아 복합여과막의 평균입자 크기는 약 40 nm이었다. 철이 첨가된 티나니아 복합여과막은 티타니아 복합여과막보다 열적 저항성이 우수하였다. 철이 첨가된 티타니아 복합여과막은 $650^{\circ}C$까지 균열이 없는 미세구조와 좁은 입도분포를 유지하였다.

• 대한기계학회논문집B
• /
• 제26권4호
• /
• pp.578-586
• /
• 2002

Flow structures around a rectangular prism have been investigated by using a PIV(Particle Image Velocimetry) technique. A thick turbulent boundary layer was generated by using spires arid roughness elements. The boundary layer thickness, displacement thickness and momentum thickness were 650mm, 117.4mm and 78mm, respectively. The ratio between the model height(40mm) and the boundary layer thickness H/$\delta$, was 0.06. The Reynolds number based on the free stream velocity and the height of the model was 7.9$\times$10$^3$. The PIV measurements were performed at three different wall normal planes. Three recirculation regions at forward facing step, top of the roof and backward facing step are clearly seen and show three dimensional features. Dramatic changes of flow patterns are observed in the wake regions in the different spanwise wall normal planes. Instead of reattachment and recirculation zone, rising streamlines are depicted at the normal planes near the side wall due to the interaction with a rising horse shoe vortex. The peak of turbulent kinetic energy occurs at the separation bubble on top of the roof and the magnitude is 2.5 times higher compared with that of the wake region.

• 한국결정성장학회지
• /
• 제1권2호
• /
• pp.46-58
• /
• 1991

$Zn(NO_3)_2\cdot6H_2O$ 를 사용하여 출발용액으로 $Zn(NO_3)_2\cdot6H_2O$(aq.)용액을 각각 1M, 0.5M, 0.25M, 0.1M의 농도로 제조하여 초음파 진동자에 의해 액적을 발생시킨후, 2.3cm/sec의 유속으로 건조 및 열분해하여 ZnO분말을 합성하였다. 이때 건조 온도는 $200^{\circ}C$, 열분해 온도는 $600^{\circ}C$였다. 제조된 ZnO분말의 열적특성을 TG-DTA로 측정하였고, IR로 미분해물 및 흡착 가스의 성분을 조사하였다. 결정상 및 crystallite의 크기를 XRD로 분석하였고, 입자의 형태는 SEM과 TEM으로 관찰한 후 입자 크기와 입도분포를 SEM 사진으로부터 측정하였다. 합성 분말은 hexagonal의 결정구조를 갖는 Zinc oxide였다. 입자의 형태는 대부분 구형이고, 약 40nm 크기의 일차입자로 구성된 이차입자였다. 평규 입자 크기는 $0.28-0.61{\mu}m$ 이고 입도 분포도 좁았다.

• 한국전기전자재료학회논문지
• /
• 제29권7호
• /
• pp.429-434
• /
• 2016

This paper deals with the characteristics of partial discharge (PD) for the purpose of a condition based maintenance (CBM) of gas insulated switchgears (GIS) in power equipment. Four types of electrode systems such as a protrusion on enclosure (POE), a particle on spacer (POS), a free particle (FP) and a Floating were designed and fabricated. PD pulses were measured using UHF sensor with a frequency range of 300 MHz~1.4 GHz and a DAQ with a sampling rate of 250 MS/s. Discharge inception voltage (DIV), discharge extinction voltage (DEV), and phase resolved partial discharge (PRPD) were analyzed depending on electrode systems. The average DIV in the POS was 28.8 kV. It was about 1.7 times higher than that in the FP, which was the lowest value of 17.2 kV. The FP shuffled and jumped at the applied voltage of 23.5 kV. Over 95% of PD pulses in the POE were generated in the negative polarity ($181^{\circ}{\sim}360^{\circ}$) of applied voltage. The results showed the phase (${\Phi}$)-magnitude (dBm) of PD pulses by UHF sensor, a cluster was formed separately depending on electrode systems.

• 대한기계학회논문집B
• /
• 제25권10호
• /
• pp.1417-1426
• /
• 2001

Turbulent flow characteristics in the near wake of a square cylinder have been studied experimentally by using a Digital PIV method. Experiments are performed at the Reynolds numbers of 1600 and 3900 based on the free-stream velocity and the square height. The ensemble averaged turbulence statistics are acquired from 2030 realizations of instantaneous fluctuating velocity field after the conventional Reynolds decomposition. The differences in turbulent intensity and Reynolds shear stress profiles fur both oases indicate that the effect of Reynolds number seems to be descernible mainly due to the occurrence of transition in the separated shear layer. Because of the periodic nature of vortex shedding process, transverse velocity fluctuations contribute dominantly , to turbulent kinetic energy distribution. A comparison with previous LDV data obtained at much higher Reynolds number shows a fairly good agreement each other. It turns out that the effect of Reynolds number diminishes as increasing Reynolds number, which is a well-known feature of a sharp-edged bluff body wake. The streamwise variation of turbulence intensities are compared with those from a circular cylinder along the centerline at the same Reynolds number. The overall magnitudes and the decay rates of turbulence intensities are quite similar, but some differences are noticeble especially in the transverse intensity variation.

• 한국건축시공학회지
• /
• 제8권4호
• /
• pp.105-114
• /
• 2008

This study investigates the saturation level of surface dryness, quantity of adhesive mortar, and the alien substance content of recycled aggregates for concrete to develop an adequate quality testing method for understanding the properties of recycled aggregates, which differ greatly from preexisting aggregates. For tests that measure the saturation level of surface dryness, where detail methods are applied differently according to the tester, various testing methods from across world were compared and analyzed. This study revealed that when measuring the saturation level of surface dryness of a certain sample, aggregates must be supplemented immediately whenever the height of the sample becomes lower than the measuring mold, and allowing the tamper to free fall on the sample will provide the most accurate results. When measuring the quantity of adhesive mortar of recycled aggregates for concrete, an acid solution was used, and since the quantity of adhesive mortar increases as the particle sizes gets smaller, the sample for testing should represent the entire granularity. Sulfuric acid solution is adequate for immersion, and the concentration should be 20% for best results. According to the alien substance content measurement, which was examined by the naked eye, the error range caused by the difference in particle size was neglectable, and therefore the sample should be $2.5{\sim}5.0mm$ in size concerning the accuracy and measuring time. Also, for coarse recycled aggregates, the sample should amount to 1kg for measuring alien substance content by the naked eye, which proves that assortment by the naked eye is the most adequate method for measuring the alien substance content of a recycled aggregate.

• 한국항공우주학회지
• /
• 제37권12호
• /
• pp.1165-1172
• /
• 2009

두 개의 평판이 직각으로 만나는 corner에서 형성되는 층류 경계층을 입자영상유속계 기법을 이용하여 측정하였다. 자유류 유속은 2.96 ~ 3.0 m/s, 층류 경계층이 형성 될 수 있도록 모델에 대한 유동의 입사각을 1.2도로 하여 작은 순 압력구배를 제공하였다. 모델의 앞전은 둥근 형상으로 처리하였으며 모델의 길이는 약 1000mm이다. 측정 결과는 이등분면에서 corner 경계층의 전형적인 특징인 변곡점을 가지는 박리형 속도 분포를 보여주었다. 이등분면에서 멀어져 감에 따라 속도 분포는 평판의 Blasius 분포로 변해가고, 이등분면 경계층 두께의 약 절반만큼 평판을 따라 멀어지면 변화가 완료된다. 앞전에서부터 하류로 감에 따라 이등분면에서의 경계층 성장 및 속도 분포의 유사 상사성을 측정 결과로부터 확인하였다.