• 한국가시화정보학회지
• /
• 제10권3호
• /
• pp.21-24
• /
• 2012

Although the motion of the three-phase contact line on a solid substrate has been extensively studied thus far, the understanding of the dynamics of the contact line of liquid/liquid/gas phases is far from complete. Here we deposit a drop of isopropyl alcohol (IPA) on water and HFE-7100 whose free surfaces are exposed to air to observe the flow field around the contact line. By combining the shadowgraph and high-speed imaging techniques, we find that vortices are spontaneously generated at the contact line, which grow in size with time. The flow is attributed to the Marangoni stress that pulls a liquid of lower-surface tension toward a liquid surface having a higher surface tension. However, it is not still clear why the entrained lower-surface-tension liquid should whirl rapidly beneath the contact line. We also visualize the flow by the particle image velocimetry (PIV) to find out that the rotational velocity reaches the order of 1 mm/s near the free surface.

• 한국환경과학회지
• /
• 제21권5호
• /
• pp.623-631
• /
• 2012

The adsorption behavior of Eosin Y on activated carbon (AC) in batch system was investigated. The adsorption isotherm could be well fitted by the Langmuir adsorption equation. The kinetics of adsorption followed the pseudo-second-order model. The temperature variation was used to evaluate the values of free energy (${\Delta}G^{\circ}$), enthalpy (${\Delta}H^{\circ}$) and entropy (${\Delta}S^{\circ}$). The positive value of enthalpy change ${\Delta}H^{\circ}$ for the process confirms the endothermic nature of the process and more favourable at higher temperature, the positive entropy of adsorption ${\Delta}S^{\circ}$ reflects the affinity of the AC material toward Eosin Y and the negative free energy values ${\Delta}G^{\circ}$ indicate that the adsorption process is spontaneous. With the increase of the amount of AC, removal efficiency of Eosin Y was increased, but adsorption capacity was decreased. And adsorption capacity was increased with the decrease of particle size. With the increase of the amount of AC, removal efficiency of Eosin Y was increased, but adsorption capacity was decreased. And adsorption capacity was increased with the decrease of particle size.

• Elastomers and Composites
• /
• 제54권4호
• /
• pp.335-344
• /
• 2019

In this work, styrene butadiene rubber (SBR) and styrene butadiene styrene (SBS) were used to modify asphalt, resulting in SBR- and SBS-modified asphalt, respectively. The two modified asphalts were emulsified with a nonionic emulsifier (Span 60) and cationic emulsifiers (ID, DDA) and their phase stabilization was investigated via particle size, Zeta potential, and flow behavior analysis. With increasing amount of the mixed emulsifier, the particle size decreased, leading to an increase in viscosity. The shear thinning behaviors and Zeta potential values ranging from 35-65 mV were determined and remained considerably stable. In addition, the adhesion strength and compression strength of the SBR-and SBS-modified asphalt emulsion were evaluated via surface free energy examination. The remarkable adhesion and compression strengths were estimated when 5 phr ID and 6 phr DDA were added to the emulsified asphalt modified with SBR and SBS. Therefore ID and DDA, the two cationic surfactants, played significant roles in improving the dispersion and interfacial adhesion strength, resulting in the improved adhesion and compression strength of the emulsified asphalts modified with SBR and SBS.

• 대한조선학회논문집
• /
• 제48권6호
• /
• pp.560-568
• /
• 2011

In SPH(Smoothed Particle Hydrodynamics) method, the fluid has been assumed that it is weakly compressible to solve the basic equations composed of Navier-Stokes equations and continuity equation. That leads to some drawbacks such as non-physical pressure fluctuations and a restriction as like small time steps in computation. In this study, to improve these problems we assume that the fluid is incompressible and the velocity-pressure coupling problem is solved by a projection method(that is, by ISPH method). The two-dimensional computation results of dam breaking and gravitational wave generation are respectively compared with the results of finite volume method and analytical method to confirm the accuracy of the present numerical computation technique. And, the agreements are comparatively acceptable. Subsequently, the green water simulations of a two-dimensional fixed barge are carried out to inspect the possibility of practical application to ship hydrodynamics, those correspond to one of the violent free surface motions with impact loads. The agreement between the experimental data and the present computational results is also comparatively good.

• 한국세라믹학회지
• /
• 제47권5호
• /
• pp.357-364
• /
• 2010

This study was performed to get basic information about properties of high blaine slag cement(HSC) to use shotcrete(or sprayed concrete and mortar). Particle size distribution, setting time and compressive strength test, analysis like as SEM, DSC thermal analysis, XRD was carried out to investigate principle properties of HSC. Setting time of HSC was delayed slightly, but influence of accelerators was more bigger than ordinary portland cement(OPC). Compressive strength of HSC at 28 days was more higher than OPC regardless of using accelerators. Results of analysis showed early period hydration products of HSC is more small and located widely, because of the interface of between cement particle and water is increased as specific surface of cement increase. From the SEM observation and analysis of DSC and XRD results, aluminates accelerators bring on some hydration products like as calcium aluminium hydrates, alkali free accelerators increases ettringite and monosulfates. Aluminates accelerators has a advantage of setting time and early strength, alkali free accelerators increases strength after 7 days.

• 수산해양기술연구
• /
• 제58권1호
• /
• pp.68-74
• /
• 2022

This study analyzed the wake characteristics of the rim-driven propeller (RDP) used in an underwater robot. For underwater robots to perform specific missions, not only propulsion characteristics but also wake characteristics must be considered. In this study, a blade was designed based on NAC 0012 with a symmetrical cross-section. The RDP was hubless with three or four blades. The influence of both the free water surface and the bottom was considered, and the wake was measured using a particle image velocimetry in the advance ratio of 0.2 to 1. Model 1 showed symmetrical wakes in the entire advance ratio section. Model 2 showed asymmetric wakes due to the influence of the free water surface and the bottom at low advance ratio.

• 한국응용과학기술학회지
• /
• 제36권2호
• /
• pp.434-447
• /
• 2019

폴리에틸렌글라이콜(PEG)은 계면활성제, 세정제, 유화제 등으로 화장품에 많이 사용된다. 이들은 제조 과정 중, ethylene oxide의 이량체화에 의해 인간에 몸에 유해한 1,4-dioxane이 부산물로 생성될 수 있다. 화장품 성분에 대한 소비자들의 관심이 증가함에 따라, 퍼스널케어 시장에서 PEG 성분이 없는 보다 안전한 에멀젼 연구의 필요성이 증대되고 있다. PEG-free 계면활성제로 사용되는 polyglycerol ester (PGE)는 비이온성 계면활성제로서 식품, 화장품 등의 분야에서 많이 사용되며 글리세롤과 지방산을 에스테르화 하여 생산된다. 본 연구에서는 PEG 성분을 함유하지 않은 나노에멀젼 제형의 개발 및 안정화를 목표로 하였다. 최적화된 나노에멀젼 제형 개발을 위해 RSM (Response Surface Methodology)를 사용하였다. 독립변수 및 변수의 범위 결정을 위한 예비 실험의 결과로 계면활성제 함량(2~4%), 오일 함량(4~8%), 폴리올 함량(12~24%)을 독립변수로 설정하였다. 반응변수로는 제형의 입자 크기(particle size), 제타 전위(zeta potential), 현탁도(turbidity), 다분산지수(polydispersity index)를 측정하였다. 제조한 나노에멀젼을 FIB (Focused ion beam)로 측정한 결과, 구형의 입자들이 100~200 nm의 크기를 가지고 분포되어 있는 것을 확인하였다. 제조된 제형에 대해 30일 간 각 온도별($4^{\circ}C$, $25^{\circ}C$, $45^{\circ}C$) 안정성 평가를 진행하였고, 최적의 입자 크기, 현탁도, 다분산지수, 제타 전위를 고려한 최적의 처방은 계면활성제(2%), 오일(8%), 폴리올(24%)로 확인되었다.

• 대한기계학회논문집B
• /
• 제23권3호
• /
• pp.408-418
• /
• 1999

Incompressible flow inside a circular cylinder Including periodically oscillating free surface waves was studied primarily by using a numerical method. We developed a finite difference scheme based on the MAC method applicable to three-dimensional free-surface flows, and applied it to the present flow model to study tho flow characteristics as well as the fluid stirring. To verify the validity of our scheme, we performed a simple experiment for flow visualization. We found that the numerical results show a reasonable agreement with the observed flow patterns.

• 한국가시화정보학회지
• /
• 제6권2호
• /
• pp.28-32
• /
• 2008

Contrary to the flow rate in fully filled pipe flows, the flow rate in partially filled pipe flows is significantly influenced by the variation of water level, channel slop, and so on. The major difference in these two flows results from the existence of a free surface. To make it clear, in the present study, a similarity of the velocity profile in a partially filled circular pipe has been investigated according to the water level. A particle image velocimetry (PIV) technique was applied to measure the three-dimensional velocity profiles. As a result, there is found a similarity of the velocity profile near the central region. However, near the side wall, the similarity is broken due to the interaction between the wall and the free surface.

• 대한기계학회논문집A
• /
• 제21권12호
• /
• pp.2196-2208
• /
• 1997

In this work, a magnetic levitation (maglev) system is developed to transport a wafer between semiconductor fabrication process modules in clean rooms to take advantages of eliminating particle and oil contamination that normally exist in conventional transport systems due to contact motion of mechanical components. A main feature of the maglev system developed in this work is that a controller and power supplying part are not mounted on the moving carrier but on the stationary track, which is defined a controller-free carrier, to reduce carrier's weight. Iron-core electromagnets and irons are used for levitation, and air-core electromagnets and permanent magnets are used for stabilization. Analysis, design, and modeling of the magnetically levitated transport system are presented. The performance of the maglev system is experimentally demonstrated.