• Journal of Periodontal and Implant Science
• /
• 제29권1호
• /
• pp.51-63
• /
• 1999

Exposure of the root surface due to gingival recession after periodontal surgery, elicit pain response when exposed to mechanical, heat, chemical or osmotic irritation. Especially patients treated with periodontal surgery, show high frequency. There have been reports that the 1 out of 7 patients complains of dentinal hypersensitivity. There have been many studies on the clinical effects of various materials on the treatment of dentinal hypersensitivity. The purposes of this study were to evaluate the effect of sodium chloride and potassium oxalate and to observe the relationship between the dentinal hypersensitivity and surface characteristics such as dentinal tubule size and number. This study included 20 teeth which were scheduled for extraction and had no pulpal disease. These teeth were divided into Root planing group, EDTA group, NaCl group and Oxalate group. Dentinal hypersensitivity is measured by tactile, pressured air and cold water using NRS (Numerical Rating Scales). Teeth were extracted under local anesthesia and each specimen was sectioned to a size about 3 X 5 mm and was examined under the scanning electron microscope (X2,000) The results were as follows, 1. The EDTA group exhibited significantly increased dentinal hypersensitivity comparing with the other groups. 2. The NaCl and Oxalate groups showed significantly reduced dentinal hypersensitivity comparing with the EDTA group. 3. As a method for dentinal hypersensitivity measurement, it was presumed thet tactile sensitivity test was not sensitive method but air blast test and cold water test were adequate method. 4. In a SEM study, the root planing group exhibited amorphous smear layer and showed no dentinal tubule orifice, but the EDTA group showed the large number of dentinal tubules. On the other hand, the NaCl and Oxalate groups did not show exposed dentinal tubules. The NaCl group showed more rough root surface than the EDTA group, and the Oxalate group showed many participates to be presumed as calcium oxalate particle. As the results from this study, root planing couldn't expose the dentinal tubule and NaCl and potassium oxalate occluded exposed dentinal tubule effectively. Dentinal hypersensitivity has close relationship with the exposure of dentinal tubules, especially with it's size and number.

• 환경영향평가
• /
• 제28권5호
• /
• pp.492-506
• /
• 2019

공용화기사격장 내 중금속 오염물은 대부분 탄두원형으로 존재하거나 입자로 존재하는 금속조각편이며 이들 미세한 금속입자들은 오랜 기간 풍화되어 표면이 산화물 또는 탄산화물로 존재할 가능성이 매우 높다. 특히 사격장 토양에서 대표적 오염물질인 납은 연성이 높아 무르고 잘 늘어나므로 더 미세입자로 존재한다. 따라서 물리적 세척 실험으로 입도분석, 입경별 중금속농도, 금속물질 성분분석, 비중, 자력, 부상선별의 적용성 평가를 실시하였다. 금속파편의 경우 FESEM분석과 무게측정결과 납은 무른 특성에 따라 얇게 조각나고 편모양의 구조로 비슷한 면적의 구형 토양보다 무게가 더 적게 나가는 것을 확인하였으며 비중선별 적용성이 높은 것을 확인할 수 있었다. 이 결과를 적용하여 하이드로사이클론을 이용한 정화효율평가 결과 1회 71%, 2회 80%, 3회 91%의 누적 정화효율을 보였다. 이에 비해 자력선별은 17%의 낮은 효율을 보였고 부상선별은 입경 0.5 mm 미만으로 선별한 대상토는(-35 mesh) 39%로 비교적 높은 효율을 보였으나 입경 2 mm 미만으로 선별한 대상토의(-10 mesh) 효율은 16%에 불과하였다. 토양세척의 대상 처리입경은 2 mm ~ 0.075 mm로 입도구분을 추가로 하여 실규모 장치에 적용하여야 하며 이는 설치비용과 공정이 추가로 구성됨에 따른 관리가 필요할 것으로 분석되었다. 결과적으로 공용화기사 격장 오염의 토양정화는 탄두 원형을 유지한 탄두는 5.56 mm 이상으로 자갈입경보다 크므로 고비중을 이용한 비중선별을 실시하고, 금속파편으로 존재하는 오염물질은 얇게 조각나고 편모양의 구조로 같은 입경의 토양보다 무게가 더 적음에 따라 토양세척의 하이드로사이클론을 이용하여 분리하여 처리할 수 있음을 확인할 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제22권3호
• /
• pp.380-385
• /
• 2011

$MgH_2$ was synthesized by hydriding chemical vapor deposition (HCVD). In this study, we examined the hydrogen storage property of $MgH_2$ synthesized by HCVD. The results of pressure-composition-temperature (PCT) measurement showed that the HCVDed $MgH_2$ reversibly absorbed hydrogen as much as 6 wt%. Each hydrogenation rate was very greater than the conventional alloy methods. The reason was that the particle size made by HCVD was small as approximately 1 ${\mu}m$. The PCT of $MgH_2$ made by HCVD methode was similar to a commercial $MgH_2$. The ${\Delta}H$ and ${\Delta}S$ value are respectively -76.8 $kJ/mol{\cdot}H_2$ and -137.4 $kJ/mol{\cdot}H_2$. Mg made by HCVD methode was activated easily than commercial Mg. Also the initial reaction rate was faster than that of commercial $MgH_2$. 70% of the total storage were stored during 400s.

• 한국세라믹학회지
• /
• 제46권1호
• /
• pp.74-80
• /
• 2009

Electrospinning process is the useful and unique method to produce nanofibers from metal precursor and polymer solution by controlled viscosity. In this study, the NiZn ferrite nanofibers were prepared by electrospinning with a aqueous metal salts/polymer solution that contained polyvinyl pyrrolidone and Fe (III) chloride, Ni (II) acetate tetrahydrate and zinc acetate dihydrate in N,N-dimethylformamide. The applied electric field and spurting rate for spinning conditions were 10 kV, 2 ml/h, respectively. The obtained fibers were treated at $250^{\circ}C$ for 1 h to remove the polymer. Finally, the NiZn ferrite fibers were calcined at $600^{\circ}C$ for 3 h and annealed at $900{\sim}1200^{\circ}C$ in air. By tuning the viscosity of batch solution before electrospinning, we were able to control the microstructure of NiZn ferrite fiber in the range of $150{\sim}500\;nm$ at 770 cP. The primary particle size in $600^{\circ}C$ calcined ferrite fiber was about 10 nm. The properties of those NiZn ferrite fibers were determined from X-ray diffraction analysis, electron microscopy, energy dispersive spectroscopy, Fourier transform infrared spectroscopy, thermal analysis, and magnetic measurement.

• 자원리싸이클링
• /
• 제16권2호
• /
• pp.32-39
• /
• 2007

폐자동차 ASR의 소각재를 대상으로 물리화학적 물성측정 및 리싸이클링을 위한 경량재료 제조실험을 수행하였다. 대상시료는 국내 ASR 소각장에서 채취한 바닥재 2종류와 비산재 4종류이었으며, 이들의 주요 성분 및 입도분석을 실시하고 공정시험법에 의한 중금속 용출량을 조사하였다. 또한, 비산재인 boiler ash를 원료로 하여 경량물질과 무기바인더를 첨가하여 성형 및 소성하는 방법으로 경량재료를 제조하였다. 바닥재에 Cu 함량이 3wt% 내외로 상당히 높은 것으로 나타나 Cu의 사전 분리가 필수적인 것으로 나타났다. 수용성물질을 많이 함유한 SDR(semi-dry reactor) ash와 Bag filter ash의 주성분은 각각 $CaCl_2{\cdot}Ca(OH)_2{\cdot}H_2O$ 및 $CaCl_2{\cdot}4H_2O$인 것으로 나타났다. boiler ash를 원료로 사용하여 제조한 경량재료 시편의 경우 중금속 용출이 크게 감소하였으며, 그 이유는 중금속 성분이 불용성 화합물천 안정화 또는 encapsulation 되었기 때문으로 판단되었다.

• 한국응용과학기술학회지
• /
• 제35권1호
• /
• pp.157-162
• /
• 2018

Halobacterium Halobium에서 항우울제의 부분 몰 부피와 몇 가지 지질의 부유물은 과량의 부피 팽창 계를 사용하여 $25^{\circ}C$에서 측정되었다. 일반적인 항우울제 인 Fluoxetine의 효능은 오랫동안 지질 용해도와 관련이 있는 것으로 알려져 왔다. Halobacterium Halobium의 보라색 막에서 유일한 막 단백질 인 소포의 변성은 280nm에서 흡수 변화에 의해 연구되었고 과도한 부피 팽창 계로 330nm에서 형광 변화를 보였다. 확산 교환에 의한 점성 중합체 용액의 1H NMR 분석은 측정을 위한 중요한 단계로, Halobacteriun Halobium에서 Fluoxetine의 부분 몰 부피와 입자 크기는 양성으로 측정되었다. 항우울제는 낮은 사기와 우울증에 근거하여 다양한 인지 및 정신 증상을 유발하는 질병을 예방하여 일일 수행 능력을 저하시키는 걸로 나타났다.

• Journal of Pharmaceutical Investigation
• /
• 제41권2호
• /
• pp.95-102
• /
• 2011

An amphiphilic cationic branched methoxy poly (ethylene glycol)-branched polyethylenimine - poly(L-phenylalanine) (mPEG-bPEI-pPhe) block copolymer was successfully synthesized by ring-opening polymerization (ROP) of N-carboxyanhydride of L-phenylalanine (Phe-NCA) with mPEG-bPEI for the preparation of more stable polyelectrolyte complex (PEC) included a hydrophobic interaction. mPEG-bPEI was firstly prepared by the coupling of mPEG and bPEI using hexamethylene diisocyanate (HMDI). The structural properties of mPEG-bPEI-pPhe copolymers were confirmed by $^1H$ NMR. The copolymers exhibited a self-assemble behavior in water above critical aggregate concentration (CAC) in the range of 0.01-0.14 g/L. The CAC of copolymers obviously depended on the hydrophobic block content in the copolymers (the value decreased with the increase of the pPhe block content). The cationic copolymers have the ability to form multi-interaction complex (MIC) with bovine serum albumin (BSA) and plasmid DNA through multi-interaction (electrostatic and hydrophobic interaction). The physicochemical characterization of the complex was carried out by the measurement of zeta potential and particle size. Their zeta-potentials were positive (approximately +10 mV) and their sizes decreased with increasing pPhe contents in the copolymers (PPF/BSA wt% ratio = 2). The complex showed good stability at high ionic strength. Therefore, mPEG-bPEI-pPhe block copolymer was considered as a potential material to enhance the stability of complex including biotherapuetic drugs.

• 자원리싸이클링
• /
• 제18권5호
• /
• pp.12-18
• /
• 2009

고분자전해질 연료전지용 캐소드 촉매로서 화학환원법을 이용하여 20% Pt/C 제조하고 다양한 온도($300-600^{\circ}C$)열처리하여 산소환원반응을 평가하였다 $300-400^{\circ}C$에서 열처리한 20% Pt/C가 높은 산소환원반응 활성을 나타냈으며, 특히 $300^{\circ}C$에서 열처리한 촉매를 0.6V에서의 정전위를 측정한결과, 열처리하지 않은 촉매에 비해서 산소환원 반응 활성정도가 2배 높게 나타났다. TEM 및 XRD 분석을 이용하여 조사한 결과, 열처리 온도가 높아짐에 따라서 백금 입자 크기가 커지고 결정화도가 증가하는 것을 확인하였다. 이러한 결과에서 산소환원반응 활성을 위한 백금의 입자 크기와 결정화도가 $300^{\circ}C$에서 최적화되는 것으로 판단된다.

• 한국재료학회지
• /
• 제2권3호
• /
• pp.163-171
• /
• 1992

$TiO_2$가 5-50wt%첨가된 $SnO_2/TiO_2$ 후막형 감습소자를 스크린 프린팅 법을 이용하여 제조 하였다. 소자의 표면결정구조를 XRD, SEM 그리고 FTIR로 조사하였으며, 전기적 특성에 의한 후막소자의 감습특성을 측정하였다. $SnO_2/TiO_2$ 후막은 $TiO_2$ 결정상 보다 주로$(SnO^2){\cdot}6T$ 결정상으로 나타났으며, $1300^{\circ}C$에서 소결된 후막소자의 평균입경은 $2.0{\mu}m$이었다. 또한 $1300^{\circ}C$에서 소결된 10wt% $TiO_2$가 첨가된 $SnO_2/TiO_2$ 후막소자는 상대습도 20-90%에서 높은 감습특성을 나타내었다.

• 한국수소및신에너지학회논문집
• /
• 제29권1호
• /
• pp.105-110
• /
• 2018

The flow boiling heat transfer of water was experimentally investigated on plain and sintered microporous surfaces in a mini-channel. The effects of microporous coating on flow boiling heat transfer of subcooled water were investigated in a 300 mm long mini-channel with a cross section of $20{\times}10mm^2$. The test section has sufficiently long entrance length of 300 mm which provides a fully-developed flow before the channel inlet. The bottom side of the channel was heated by a copper block assembled with a high-density cartridge heater and other sides of the channel were insulated. The microporous surface was fabricated by sintering copper particles with the average particle size of $50{\mu}m$ on the top side of the copper block. Heat transfer measurement was conducted at the mass flux of $208kg/m^2s$ and the heat flux up to $500kW/m^2$. Microporous coated surface showed an earlier boiling incipience compared with plain surface regardless of the mass flux. Microporous coating were significantly attributed to local wall temperature and local heat transfer coefficient for flow boiling.