• Title/Summary/Keyword: Particle site distribution

Search Result 104, Processing Time 0.034 seconds

Study on Electrical Resistivity Pattern of Soil Moisture Content with Model Experiments (토양의 함수율에 따른 전기비저항 반응 모형 실험 연구)

  • Ji, Yoonsoo;Oh, Seokhoon;Lee, Heui Soon
    • Geophysics and Geophysical Exploration
    • /
    • v.16 no.2
    • /
    • pp.79-90
    • /
    • 2013
  • Geophysical investigation in non-destructive testing is economically less expensive than boring testing and providing geotechnical information over wide-area. But, it provides only limited geotechnical information, which is hardly used to the design. Accordingly, we performed electrical resistivity experiments on large scale of soil model to analyze the correlation between electrical resistivity response and soil water contents. The soils used in the experiments were the Jumunjin standard sand and weathered granite soil. Each soil particle size distribution and coefficient of uniformity of experimental material obtained in the experiments were maintained in a state of the homogeneous. The specifications of the model used in this study is $160{\times}100{\times}50$(cm) of acrylic, and each soil was maintained at the height 30 cm. The water content were measured using the 5TE sensors (water contents sensors) which is installed 7 ~ 8 cm apart vertically by plugging to floor. The results of the resistivity behavior pattern for Jumunjin standard sand was found to be sensitive to the water content, while the weathered granite soil was showing lower resistivity over the time, and there was no significant change in behavior pattern observed. So, it results that the Jumunjin standard sand's particle current conduction was better than the weathered granite soil's particle through contact with the distilled water. This lab test was also compared with the result of a test bed site composed of similar weathered soil. It was confirmed that these experiments were underlying research of non-destructive investigation techniques to improve the accuracy to estimate the geotechnical parameter.

Chemical Composition Characteristics of Fine Particulate Matter at Atmospheric Boundary Layer of Background Area in Fall, 2012 (배경지역 대기경계층 미세먼지의 화학조성 특성: 2012년 가을 측정)

  • Ko, Hee-Jung;Lee, Yoon-Sang;Kim, Won-Hyung;Song, Jung-Min;Kang, Chang-Hee
    • Journal of the Korean Chemical Society
    • /
    • v.58 no.3
    • /
    • pp.267-276
    • /
    • 2014
  • The collection of $PM_{10}$ and $PM_{2.5}$ fine particulate matter samples was made at the 1100 m site of Mt. Halla of Jeju Island, located at the atmospheric boundary layer (ABL) of background area, during the fall of 2012. Their ionic and elemental species were analyzed, in order to investigate the chemical compositions and size distribution characteristics. In $PM_{2.5}$ fine particles ($d_p$ < $2.5{\mu}m$), the concentrations of the secondary formed nss-$SO{_4}^{2-}$, $NH_4{^+}$ and $NO_3{^-}$ species were 4.84, 1.98, and $1.27{\mu}g/m^3$, respectively, showing 58.2% of the total $PM_{2.5}$ mass. On the other hand, their concentrations in $PM_{10-2.5}$ coarse particles (2.5 < $d_p$ < $10{\mu}m$) were 0.63, 0.21 and $1.10{\mu}g/m^3$, respectively, occupying 22.8% of the total $PM_{10-2.5}$ mass. The comparative study of size distribution has resulted that $NH_4{^+}$, nss-$SO{_4}^{2-}$, $K^+$ and $CH_3COO^-$ are mostly existed in fine particles, and $NO_3{^-}$ is distributed in both fine and coarse particles, but $Na^+$, $Cl^-$, $Mg^{2+}$ and nss-$Ca^{2+}$ are rich in coarse particle mode.

Characteristics of Sediment Compositions and Cs Adsorption on Marine Sediment near Wuljin Nuclear Powerplant (울진원전 근해 해저 퇴적물의 구성성분 및 방사성 Cs 흡착 특성)

  • Kim Yeongkyoo;Kim Kyung-Mi;Jung Hee-Jin;Kang Hee-Dong;Kim Wan;Doh Si-Hong;Kim Do-Sung
    • Economic and Environmental Geology
    • /
    • v.38 no.6 s.175
    • /
    • pp.689-697
    • /
    • 2005
  • Mineralogical composition, $^{137}Cs$ activity, total organic carbon (TOC), and particle size of marine sediments near Wuljin Nuclear Powerplant were analyzed and the relationships among those components were investigated. The particle sizes of sediments were equivalent to sand size and in the range of $-0.48\~3.6\;Md\phi$. TOC contents and $^{137}Cs$ activities were in the range of $0.06\~1.75\%$ and minimum detectable activity (MDA) $\~4.0Bq/kg-dry$ with the average value of $1.15{\pm}0.62$ Bq/kg-dry, respectively. The sediments in study area were characterized by large particle size and small TOC contents, and $^{137}Cs$ activity compared with other marine sediments. The main mineral components were quartz and feldspar (albite, microcline, and small amount of orthoclase) with small amount of pyroxene, calcite, hornblende. Minerals with $10{\AA}$ XRD peak (mainly biotite) and chlorite were also identified. Among those minerals, biotite shows the linear relationship with $^{137}Cs$ content probably due to the frayed edge site (FES) on biotite or small amount of mixed illite. However, TOC content shows most linear relationship with $^{137}Cs$ content because no significant amount of clay minerals, which can adsorb significant amount of Cs, were observed in the study area, indicating that the distribution of $^{137}Cs$ in this study area was more significantly affected by the TOC content than mineral composition.

Characteristic Analysis and Effect of Particulate Material in Drinking Water Distribution Networks (상수도관망에서 입자성 물질의 특성분석 및 영향조사)

  • Kim, Do-Hwan;Lee, Doo-Jin;Hwang, Jin-Su;Choi, Doo-Yong
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.35 no.5
    • /
    • pp.312-320
    • /
    • 2013
  • Particulates in drinking water distribution system (DWDS) are mostly influenced by internal corrosion of metal pipes and sediment in pipelines due to the solution of this effect is limited. The particle size, component and properties of compounds for particulates in distributed water are different and the difference of these characteristics will be occurred by the kind of facilities, pipe condition, external factors and supply system etc. In this study, conducting the investigation of water quality in DWDS researches with particulates in the water. Monitoring sites were each water supply reservoir and the end of water supply area in DWDS. To collect particulate material at each sampling site, $47{\phi}$ glass microfiber filter type GF/C was performed using a filtration. Substances that the effect of the turbidity in the water according to particulate suspended solids and inorganic materials is due to the increasing particulates in the end of DWDS were increased. The result of compounds analysis by using X-ray diffraction (XRD) were Goethite (${\alpha}$-FeOOH), Magnetite ($Fe_3O_4$) in the end of DWDS and Quartz ($SiO_2$), Yeelimite ($Ca_4Al_6O_{12}SO_4$) at the effluent of waterworks and reservoirs. There were differences the compounds and sediments in the releasing or remaining water distribution facilities.

Habitat Characteristics and Distribution of Cymbidium kanran Native to Jejudo, Korea (제주한란의 자생환경 특성 및 분포에 관한 연구)

  • Lee, Jong Suk
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.7 no.1
    • /
    • pp.40-49
    • /
    • 2004
  • This work carried out to define the characteristic of Cymbidium kanran habitat at Mt. Halla in Jejudo, Korea from the ecological point of view including geological and topographical features, air and soil temperature, relative humidity, fluctuations of light intensity, habitat vegetation, distribution altitude, area limit, and etc. And another goal of this study consider the conservation counterplan of the cymbidium habitat. Natural distribution areas of the cymbidium were observed more abundantly on the well drained south and east-facing slopes. Soil acidity was ranged from pH 4.1 to 5.3, and electric conductivity was ranged from 176.4 to 299.9 us/cm (average 215.3 us/cm). Base-saturation percentage of the habitat soil was below 50%, bulk density 0.42g/$cm^2$, particle density 2.05g/$cm^2$, humus content 26%, total nitrogen 0.82%, available phosphate 4.2 mg/kg, exchangeable potassium 0.63 Cmol/kg, calcium 0.44 Cmol/kg and magnesium 0.67 Cmol/kg. Annual mean air temperature was $15.4^{\circ}C$, however, air temperature was ranged $11.7{\sim}18.2^{\circ}C$ in spring, $21.2{\sim}23.8^{\circ}C$ in summer, $12.8{\sim}22.0^{\circ}C$ in fall and $5.5{\sim}7.8^{\circ}C$ in winter season. Annual mean soil temperature at depth of 10cm was $13.2^{\circ}C$ And minimum value was recorded $4.7^{\circ}C$ on January, and maximum value $22.5^{\circ}C$ on August. Relative humidity was ranged 90.8~94.7% in summer, 80.8~91.5% in fall and 77.6~84.2% in winter season. Minimum value was 56.5% on December, and maximum value was 100% on July and August. Light intensities were ranged from 400 to 1,800 lux at the greater part of Cymbidium kanran sites in Jejudo. Summer regarded as an lower light intensities was recorded to be range of 500~600 lux; however, autumn and winter were shown higher light regimes ranged from 3,500 to 3,800 lux. Therefore, one must be suprised that the cymbidium grow at the light condition of 6 lux (minimum) or 10,000 lux (maximum). Tree species keeping higher frequency rate and density were Eurya japonica, Camellia japonica, Castanopsis cuspidata, Carpinus laxiflora and Pinus densiflora. Number of trees growing in a 5${\times}$5m quardrat was 35 as an average, and proportion of evergreen versus deciduous was 5:1. Distribution altitude of the orchid habitat was ranged from 120m (low) to 840m (high) from sea level on the south facing slope of Mt. Halla, and was ranged eastern borderline of Gujwaup, Bukjejugun to western boundaries of Jungmundong, Seogwipo city. For the stable conservation of Cymbidium kanran habitat, sunlight regimes must be increased more by means of cutting trees or twigs in the site.

Gold Immunolocalization of Rubisco and Rubisco Activase in Pyrenoid of Chlamydomonas reinhardtii

  • He, Pei-Min;Zhang, Da-Bing;Chen, Geng-Yun;Liu, Qi-Gen;Wu, Wei-Ning
    • ALGAE
    • /
    • v.18 no.2
    • /
    • pp.121-127
    • /
    • 2003
  • The pyrenoid ultrastructure and distribution of ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco) and Rubisco activase in the chloroplasts of Chlamydomonas reinhardtii was studied using the immunogold localization technology with electron microscopy. There were several tubular thylakoids invading in the pyrenoid matrix to form several spokewise channels. The connections between pyrenoid matrix and stroma of chloroplast were the partial of channels. The starch sheath surrounding the pyrenoid was separated into several parts by the connections in transection. Some thylakoids were packed together near the connections in one side of the pyrenoid. Those special structures might be used to transport substance between pyrenoid and stroma of chloroplasts. With the antibody raised against the large subunits of Rubsico from C. protothecoides, the result of the gold immunolocalization of Rubisco in Chlamydomonas reinhardtii showed most of the gold particles heavily labeled the pyrenoid matrix, as well as the starch sheath matrix, and very few in the stroma of chloroplasts. The gold particle density was 880.00 $\pm$ 164.32, 190.00 $\pm$ 152.39 and 9.60 $\pm$ 5.37 ${\mu}m^{-2}$ in pyrenoid matrix, starch sheath and stroma region of chloroplast respectively (background: 5.67 $\pm$ 1.53 ${\mu}m^{-2}$). 99.59% of the total Rubiscos was calculated to be concentrated in the pyrenoid matrix and starch sheath by spatial densities. The gold immunolocalization of Rubisco activase also showed that Rubisco activase was mainly concentrated in the periphery of the pyrenoid and the starch sheath (the density was as high as 229.69 $\pm$ 96.96 ${\mu}m^{-2}$). There were very few gold particles located in the stroma of chloroplasts. These results indicated that pyrenoid surface and starch sheath was the site for Rubisco activation and $CO_2$ fixation, which supported the suggestion that pyrenoids perform photosynthesis function.

A Study on Operating Method to Save Energy from the Adsorption Dryer in the Process of Purifying Compressed Air (고순도 압축공기 제조시스템의 흡착식 Dryer에서 에너지절감을 위한 운전방법에 관한 연구)

  • Kang, Seok-Wan;Chang, Sung-Ho;Kim, Hyeon-Joon;Kim, Sung-Soo;Lee, Yeong-Wook
    • Journal of Korean Society of Industrial and Systems Engineering
    • /
    • v.39 no.3
    • /
    • pp.180-191
    • /
    • 2016
  • Optimizing energy usage for maximum efficiency is an essential goal for manufacturing plants in every industrial manufacturing sector. The generation and distribution of purifying compressed air is a large expense incurred in practically all manufacturing processes. Not only is the generation and treatment expensive equipment of compressed air, but frequent maintenance and effective operation is also required. As a plant's compressed air system is often an integral part of the production process, it needs to be reliable, efficient, and easy to be maintain. In this paper, we study to find operating method to save energy from the adsorption dryer in the process of purifying compressed air, which is required for a clean room production site in "A" company. The compressed air passes through a pressure vessel with two "towers" filled with a material such as activated alumina, silica gel, molecular sieve or other desiccant material. This desiccant material attracts the water from the compressed air via adsorption. As the water clings to the desiccant, the desiccant particle becomes saturated. Therefore, Adsorption dryer is an extremely significant facility which removes the moisture in the air $70^{\circ}C$ below the dew point temperature while using a lot of energy. Also, the energy consumption of the adsorption dryer can be varied by various operating conditions (time, pressure, temperature, etc). Therefore, based on existing operating experiments, we have searched operating condition to maximize energy saving by changing operating conditions of the facility. However, due to a short experiment period (from September to October), further research will be focused on considering seasonality.

Manufacturing Process of Microcapsules for Autonomic Damage Repair of Polymeric Composites (폴리머 복합재의 자가치료용 마이크로캡슐 제조공정 연구)

  • ;;;;M.R. Kessler;S.R. White
    • Composites Research
    • /
    • v.15 no.2
    • /
    • pp.32-39
    • /
    • 2002
  • This study focused on the introduction of processing procedure for microcapsules loaded with the healing agent and then microcapsules with the healing agent were manufactured by experiments. The DCPD (dicyclopentadiene) was used for the healing agent and the shell of microcapsules was consisted of urea-formaldehyde resin. The magnitude and the site distribution of microcapsules were measured by a particle size analyzer using laser diffraction technique. Thermal analysis was conducted by using a DSC fur the healing agent, microcapsules without the healing agent, and microcapsules with the healing agent. Also thermal stability was investigated by using a TGA under continuous and isothermal heating conditions far the healing agent, microcapsules without the healing agent, microcapsules with the healing agent. According to the results. microcapsules with the healing agent were verified to be so thermally stable that the healing agent could not evaporate until the shell of microcapsules were burned.

Study on the Characteristics of PM Distribution in Coastal and Inland Cities Correlation and Its Correlation (해안 및 내륙도시 내 토지이용도별 미세먼지 분포 특성 및 상호 관련성에 관한 연구)

  • Han, Seung-Wook;Lee, Soon-Hwan;Lee, Hwa-woon
    • Journal of Environmental Science International
    • /
    • v.24 no.11
    • /
    • pp.1513-1523
    • /
    • 2015
  • In order to clarify the characteristics of PM10 in coastal and inland cities and their variation statistical analysis were carried out using environmental and meteorological data observed at Busan and Daegu metropolitans during 4 year from 2010. Averaged PM10 concentration was higher in industrial area than any other land-use sites, and its maximum value reach on over $50{\mu}g/m^3$ at Jangrim site in Busan. Temporal and spatial variations of PM10 concentration in Busan were more sharply, since topograph and mesoscale wind pattern in Busan is more complicated than those in Daegu. Correlation of PM10 concentrations between sites within Daegu appeared strongly and maximum values $R^2$ is about 0.8. This indicate that because wind pattern induced by mesoscale forcing in Daegu are well unified, the variation of PM10 concentration tends to be similar in all sites within Daegu. However, due to complicate wind pattern induced by topography and coastal line, PM10 correlation of sites within Busan was weaker in comparison with in Daegu. And correlation of PM10 at same lane-use in Busan and Daegu tend to be related to the intensity of meteorological forcing, which can decide the intensity of wind pattern.

Variations and Trends in Concentrations of Polycyclic Aromatic Hydrocarbons (PAHs) in Air (대기 중 다환방향족 탄화수소류의 오염도 변화 특성)

  • Chung, Yong;Park, Seong-Eun;Hwang, Man-Sik;Hong, Ji-Yeon
    • Environmental Analysis Health and Toxicology
    • /
    • v.13 no.1_2
    • /
    • pp.43-53
    • /
    • 1998
  • Ambient air levels of polycyclic aromatic hydrocarbons(PAHs) are of concern because of their potential for adverse health effects including transformation of some of these substances to mutagens and carcinogens by mammalian microsomal enzyme system. Airbone particulate samples were collected by a conventional high-volume sampler and by an Anderson cascade impactor on 2 to 3 days in each month over a period of 1 year at a representative site of the heavy traffic area of Seoul from beptember 1994 to August 1995. Ten individual PAHs in sizable air particulates of each stage of two months were separated and analyzed by gas chromatography/mass spectrometry. As a results of analysis, the gross concentrations of PAHs in the fine and coarse particles were higher in the winter month than in the spring, followed in descending order by in the fall and summer. In a study of dependency of 10 PAHs compounds on size distribution of particles at heavy traffic area found that about 85% of the total PAHs content was associated with particles less than 2.0um (fine particles) in diameter of winter sampling period. while 79% were associated with this size fraction during summer period. In according to the mean concentrations of the 10 PAHs in 7 size classification from < 0.38 to> 10.1, the 'size was the smaller, PAHs concentration was the higher. Thus it was found that PAHs concentration was greatly affected by air particle size. Annual mean benzo(a)pyrene equivalents was 5.88ng/m$^3$ and obtained by applying, toxic equivalency factor developed by Nisbet and Lagoy.

  • PDF