• 한국대기환경학회지
• /
• 제19권2호
• /
• pp.205-216
• /
• 2003

We have gathered exposure data on ambient air quality level and investigated dose-response slope factors of air pollutants such as fine particle, HAPs (metals, VOCs, PAHs) and dioxins in Seoul. Theoretical mortality incidences were estimated from exposure to these pollutants. From the results, priorities were ranked in the order fine particle, metals, VOCs, dioxins and PAHs by ordinal scale, and the uncertainties relative to those risk estimates were described.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.55.4-55
• /
• 2002

In the semiconductor fabrication, particle contamination is wide-spread and one of major causes to yield loss. Extensive testing has revealed that even careful handling of wafers during processing may cause photo-resist materials to flake off wafer edges. So, to remove the photo-resist at the outer 5mm of wafers, UV(Ultraviolet) rays are exposed. WEE (Wafer Edge Exposure) process station is the system that exposes the wafer edge as prespecified by controlling the positioning mechanism and maintaining the light intensity level In this work, WEE process station has been designed so as to significantly lower the amount of particle contamination which occurs even during the most r...

• 한국입자에어로졸학회지
• /
• 제20권3호
• /
• pp.79-94
• /
• 2024

Exposure to ambient particulate matter (PM) 2.5 can impair alveolar macrophages (AMs) functions and induce pathological conditions. This study explores the impact of PM2.5 exposure on AMs, focusing on gene expression changes and functional alterations. Murine AMs cell line MH-S were exposed to PM2.5 at a concentration of 100 ㎍/ml for durations of 3 and 48 hours. After 3 hours of exposure, genes involved in inflammatory and immune responses were activated, including TNF and B-cell receptor signaling pathways. In contrast, 48 hours of exposure significantly altered genes related to cell proliferation, apoptosis, and immune processes, with PI3K-Akt and cytokine-cytokine receptor interaction pathways. PM2.5 initially triggers immune responses; however, prolonged exposure over 48 hours impairs AM functions risk of chronic inflammation and cancer. This research provides foundational data for therapeutic approaches related to PM2.5 exposure.

• 한국대기환경학회지
• /
• 제32권5호
• /
• pp.457-468
• /
• 2016

Traffic-related air pollutants and particulates from diesel exhaust cause for increasing respiratory health problem. Recent epidemiologic studies have reported adverse effects of urban air pollution on various aspects of respiratory health. Bus or truck terminal workers have high probability of exposure to diesel exhaust particle than general office worker. This study was designed to evaluate the relationship between pulmonary function of people who working at the high-density area of diesel vehicles and pulmonary function of people who working at general office in Seoul. So, this study explored the effects on people with exposure to diesel traffic or exposure to diesel traffic, through the pulmonary function test (PFT). There were significant difference in Forced Vital Capacity (FVC) and Forced Expiratory Volume in 1 second ($FEV_1$) between high-exposure group and control. High-exposure to diesel particle were increased risk of reduction in pulmonary function in this study. These results provide the necessity additional research that manage people who working at the high-density area of diesel vehicles.

• 한국산업보건학회지
• /
• 제28권3호
• /
• pp.273-282
• /
• 2018

Objectives: Dustiness of nanomaterials is considered as exposure index of essential material. Research on dustiness of nanomaterial is needed to control exposure in workplaces. Method: Dustiness measurement using vortex shaker were installed in the laboratory. Nanomaterials, 1 g, was put in the glass test tube and shaked using vortex shaker. Aerosol dispersed was measured using scanning mobility particle sizer(SMPS) and optical particle counter(OPC). Mass concentration using PVC filter and cassette was measured and TEM grid sampling was conducted. Total particle concentration and size distribution were calculated. Image and chemical composition of particles in the air were observed using transmission electron microscopy and energy dispersive X-ray spectrometer. Eleven different test nanomaterials were used in the study. Results: Rank of mass concentration and particle number concentration were coincided in most cases. Rank of nanomateirals with low concentration were not coincided. Two types of fumed silica had the highest mass concentration and particle number concentration. Indium tin oxide, a mixture of indium oxide and tin oxide, had high mass concentration and particle number concentration. Indium oxide had very low mass concentration and particle number concentration. Agglomeration of nanoparticles in the air were observed in TEM analysis and size distribution. In this study, mass concentration and particle number concentration were coincided and two index can be used together. The range of dustiness in particle number concentration were too wide to measure in one method. Conclusion: Particle number concentration ranged from low concentration to high concentration depend on type of nanomaterial, and varied by preparation and amount of nanomaterial used. Further study is needed to measure dustiness of all nanomaterial as one reference method.

• 한국수자원학회논문집
• /
• 제54권8호
• /
• pp.607-616
• /
• 2021

본 연구는 가는 모래로 이루어진 하상으로부터 침식된 부유사의 농도분포 계산결과에 차폐효과가 미치는 영향을 살펴보는 것을 목적으로 수행되었다. 하상재료의 입도분포를 고려하여 침식율을 산정할 수 있는 유사이동 모형을 개발하였으며, 측정자료와의 비교를 통해 수치모형의 적용가능성을 검토하였다. 수치모의결과로부터 하상재료 입도분포의 기하표준편차가 1.5보다 작은 경우 차폐효과가 부유사 농도의 연직방향 분포 계산결과에 미치는 영향은 매우 작은 것으로 나타났다. 또한 기하표준편차가 1.5이하인 가는 모래로 이루어진 하상으로부터 침식된 유사 농도를 계산하는 경우, 균일사로 가정 후 대표입경을 바탕으로 농도를 산정하여도 합리적인 결과가 얻어지는 것으로 확인되었다.

• Environmental Analysis Health and Toxicology
• /
• 제21권1호
• /
• pp.57-69
• /
• 2006

Lately human exposure to fine particles smaller than $2.5{\mu}m$ in aerodynamic diameter ($PM_{2.5}$) has become a great concern in Korea due to their possible cause of elevated mortality, lung function decrements, and more frequent hospital admissions for asthma. This study was conducted to investigate seasonal variations of human exposure to residential $PM_{2.5}$ and particle-associated polycyclic aromatic hydrocarbons (PAHs). Ten homes in Chuncheon, Korea were visited for continuous 72 hour sampling of $PM_{2.5}$ in the living rooms using a MiniVol Portable Sampler from December 22, 2002 to November 3, 2003. During the same period, outdoor $PM_{2.5}$ samples were collected on the top of the Natural Sciences Building of Kangwon National University which is located in the middle of the ten households. Samples were analyzed for $PM_{2.5}$ mass concentrations and six selected PAHs. In two smoking homes, the highest $PM_{2.5}$ concentrations were measured ranging from 51.1 to 69.7 {\mu}g/m^3$ on average in all seasons, indicating smoking is a very important contributor to the elevation of indoor particle concentrations. Seasonal comparison showed that indoor particle concentrations were higher than outdoor ones except winter. Total PAH concentrations in smoking homes were highest in winter among the seasons primarily due to low ventilation rate, followed by the outdoor site and nonsmoking homes. BaP toxic equivalents (TEQs) were calculated for five PAHs. The TEQ for smoking homes in winter was highest followed by the outdoor site in winter. It is concluded that smoking and ventilation rate are two important contributors to the elevation of indoor $PM_{2.5}$ and PAH concentrations.

• 한국산업보건학회지
• /
• 제30권1호
• /
• pp.1-9
• /
• 2020

Objectives: The purpose of this case study is to assess workers' exposure to carbon nanotubes(CNTs) and characterize particles aerosolized during the process of producing CNT-enabled polytetrafuoroethylene(PTFE) composites at a worksite in Korea. Methods: Personal breathing zone and area samples were collected for determining respirable concentrations of elemental carbon(EC) using NIOSH(National Institute for Occupational Safety and Health) Method 5040. Personal exposure to nano-sized particles was measured as the number concentration and mean diameter using personal ultrafine particle monitors. The number concentration by particle size was measured using optical particle sizers(OPS) and scanning mobility particle sizers(SMPS). Transmission electron microscopy (TEM) area samples were collected on TEM grids and analyzed to characterize the size, morphology, and chemistry of the particles. Results: Respirable EC concentrations ranged from 0.04 to 0.24 ㎍/㎥, which were below 23% of the exposure limit recommended by NIOSH and lower than background concentrations. Number concentrations by particle size measured using OPS and SMPS were not noticeably elevated during CNT-PTFE composite work. Instant increase of number concentrations of nano-sized particles was observed during manual sanding of CNT-PTFE composites. Both number concentrations and mean diameters did not show a statistically significant difference between workers handing CNT-added and not-added materials. TEM analyses revealed the emission of free-standing CNTs and CNT-PTFE aggregate particles from the powder supply task and composite particles embedded with CNTs from the computer numerical control(CNC) machining task with more than tens of micrometers in diameter. No free-standing CNT particles were observed from the CNC machining task. Conclusions: Significant worker exposure to respirable CNTs was not found, but the aerosolization of CNTs and CNT-embedded composite particles were observed during handing of CNT-PTFE powders and CNC machining of CNT-PTFE composites. Considering the limited knowledge on the toxicity of CNTs and CNT composite particles to date, it seems prudent to take a precautionary approach for the protection of workers' health.

• 한국산업보건학회지
• /
• 제9권2호
• /
• pp.145-157
• /
• 1999

Wood dust is created when machines are used to cut or shape wood materials. Industries of high risk of wood dust exposure are sawmills, dimension mills, furniture industries, and carpenters, etc. Health effects associated with wood dust exposure includes dermatitis, allergic respiratory effects and cancer. Health effects of wood dus t are mainly depend on the concentration, dust size and exposure time. This study were carried out to evaluate the concentration and particle size distribution of wood dust during working processes. The subjects of this study were 53 workers exposed to wood dust in 7 furniture factories and 5 musical instruments, and 5 sawmill factories. The average total wood dust concentrations measured by personal cascade impactor were $1.82{\pm}2.31mg/m^3$ in primary manufacture, $3.59{\pm}1.72mg/m^3$ in s econdary manufacture, $5.09{\pm}1.46mg/m^3$ in sanding operation. Mass median diameters of hardwoods dust were $3.36{\mu}m$ in primary manufacture, $4.25{\mu}m$ in secondary manufacture, $4.21{\mu}m$ in sanding operation. softwoods dust were $3.39{\mu}m$ in primary manufacture, $4.34{\mu}m$ in secondary manufacture. Particle size distributions showed a nearly the same pattern in each working processes. The sample concentration of all hardwood dust exceeded the Threshold Limit Value(TLV) and 20.8% of the softwood dust exceeded the Threshold Limit Value. The range of size distribution were $0.5-10{\mu}m$ in the soft and hardwood dust. The respirable dust of soft and hardwood took up 59% and above. Therefore new threshold limit value for wood dust should be needed in Korea. Also, it should be done for various studies on health effects related to occupational exposure of wood dust.

• 한국환경보건학회지
• /
• 제44권6호
• /
• pp.524-538
• /
• 2018

Objective: This study aimed to identify the size distributions of particulate matter emitted during 3D printing according to operational conditions and estimate particle inhalation exposure doses at each respiratory region. Methods: Four types of printing filaments were selected: acrylonitrile-butadiene-styrene (ABS), polylactic acid (PLA), Laywood, and nylon. A fused deposition modeling (FDM) 3D printer was used for printing. Airborne particles between 10 nm and $10{\mu}m$ were measured before, during, and after printing using real-time monitors under extruder temperatures from 215 to $290^{\circ}C$. Inhalation exposures, including inhaled and deposited doses at the respiratory regions, were estimated using a mathematical model. Results: Nanoparticles dominated among the particles emitted during printing, and more particles were emitted with higher temperatures for all materials. Under all temperature conditions, the Laywood emitted the highest particle concentration, followed by ABS, PLA, and nylon. The particle concentration peaked for the initial 10 to 20 minutes after starting operations and gradually decreased with elapsed time. Nanoparticles accounted for a large proportion of the total inhaled particles in terms of number, and about a half of the inhaled nanoparticles were estimated to be deposited in the alveolar region. In the case of the mass of inhaled and deposited dose, particles between 0.1 and $1.0{\mu}m$ made up a large proportion. Conclusion: The number of consumers using 3D printers is expected to expand, but hazardous emissions such as thermal byproducts from 3D printing are still unclear. Further studies should be conducted and appropriate control strategies considered in order to minimize human exposure.