• Corrosion Science and Technology
• /
• 제9권6호
• /
• pp.247-253
• /
• 2010

The characteristics of selective oxidation prior to hot-dip galvanizing with the annealing atmosphere dew point and chemical composition in dual-phase steels and their effect on the inhibition layer formation relevant to coating adhesion have been studied using a combination of electron microscopic and surface analytical techniques. The annealed and also galvanized samples of 3 kinds of Si/Mn ratios with varied amounts of Si addition were prepared by galvanizing simulator. The dew point was controlled at soaking temperature $800^{\circ}C$ in 15%$H_2$ -85%$N_2$ atmosphere. It was shown that good adhesion factors were mainly uniformity of oxide particle distribution of low number density and low Si/Mn ratio prior to hot-dip galvanizing. Their effect was the greatly reduced coating bare spots and the formation of uniform inhibition layer leading to good adhesion of Zn overlay. The mechanism of good adhesion is suggested by two processes: the formation of inhibition layer on the oxide free surface uncovered with no $SiO_2$-containing particles in particular, and the inhibition layer bridging of oxide particles. The growth of inhibition layer was enhanced markedly by the delayed reaction of Fe and Al with the increase of Si/Mn ratio.

• 펄프종이기술
• /
• 제30권3호
• /
• pp.74-83
• /
• 1998

The phenomenon of decrease in sizing efficiency when the stock temperature is increased is well recognized as summer sizing, and this is believed to be caused by uneven distribution of sizing agents on paper surface most often incurred by coagulation of sizing agents. When unevenly sized paper is used as coating base stock, nonuniform consolidation of the coating layer may result, which, in turn, causes uneven distribution of binder on coating surface. This causes nonuniform ink absorption to produce print mottle. In this study the effects of simple or polymeric electrolytes, storage temperature and time on the coagulation of cationic dispersed rosin size were investigated using a turbidity measurement method which was verified to correlate well with the particle size of rosin emulsion or its coagulates. Handsheets sized with rosin dispersions coagulated under various conditions were prepared and their sizing degree and coated paper properties including gloss and ink density were examined. The relationship between the sizing nonuniformity of coated papers and its ink absorption property was evaluated. Turbidity of rosin emulsion increased as the storage temperature and time were increased. Addition of simple or polymeric electrolytes caused reduction in $zeta$ -potential of the rosin dispersion and accelerated the coagulation tendency substantially. Reversion of the $zeta$ -potential of rosin dispersion, however, did not occur when coagulation was induced with simple electrolytes. On the other hand, addition of an anionic polyelectrolyte reversed the $zeta$ -potential of the flocculated rosin dispersion. This indicated that electrical double layer compaction and bridging flocculation were coagulation mechanisms for simple and polymeric electrolytes, respectively. Sizing degree decreased as coagulation of rosin was increased. Paper gloss, ink gloss and ink density were increased when sizing degree of base stock was increased most probably due to prevention of base paper swelling and increased binder migration to coating surface. This suggested that uneven printing ink density occurred when uneven sizing development was induced by coagulation of rosin particles.

• 마이크로전자및패키징학회지
• /
• 제29권2호
• /
• pp.91-97
• /
• 2022

본 연구에서는 솔더 분말 크기에 따른 솔더페이스트의 젖음성 및 레올로지 특성을 평가하였다. 솔더페이스트는 T4 (20~28 ㎛), T5 (15~25 ㎛), T6 (5~15 ㎛) 3종류의 Sn-Ag-Cu 합금 분말을 사용하였고, 플럭스와 진공에서 혼합하여 솔더페이스트를 제조하였다. 스파이럴 점도계로 10 rpm의 속도로 측정했을 때 T4, T5, T6 솔더페이스트의 점도는 각각 155, 263, 418 Pa·s의 점도를 보이며, 분말크기가 감소함에 따라 점도는 증가되는 것이 관찰되었다. 또한, 솔더페이스트의 경시변화에 따른 점도변화를 관찰하였으며, 7일 후 T4 솔더페이스트의 경우 점도가 2.6% 증가하여 거의 변화가 없었으나, T5는 20.6%의 증가를 보였으며, T6의 경우 점도 증가가 매우 높아 스파이럴 점도계로는 측정이 불가하였다. 분말 크기에 따른 솔더페이스트 점도 특성은 솔더의 인쇄성에 큰 영향을 주었다. T4 솔더페이스트의 경우 인쇄특성 및 슬럼프와 브릿징 특성이 우수하였지만, 분말 크기가 작은 T5의 경우 인쇄성이 다소 떨어졌으며, T6의 경우 점도가 높아 솔더페이스트가 마스크 개구홀의 벽에 붙고, 따라서 인쇄성이 매우 떨어지는 모습을 보였다. 솔더링을 진행할 경우, T6 솔더페이스트는 디웨팅(dewetting)이 발생하여 젖음성도 T4, T5에 비해 낮은 것이 관찰되었다.