• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2009년도 정기 학술대회
• /
• pp.243-246
• /
• 2009

본 연구에서는 분자동역학 전산모사와 미시역학 모델을 이용하여 나노입자의 크기와 체적분율 변화가 나노복합재의 물성변화에 미치는 영향을 효과적으로 묘사할 수 있는 순차적 브리징 해석기법을 개발하였다. 나노 입자의 크기변화와 체적분율 변화에 따른 영률과 전단계수를 분자동역학 전산모사를 통해 예측한 후, 이를 연속체 모델에서 구현하기 위해 다중입자 모델을 적용하였다. 나노입자의 크기효과를 반영하기 위해 입자와 기지 사이에 유효계면을 추가적인 상으로 도입하였고, 체적분율 효과는 나노복합재를 둘러싸는 무한영역의 물성값을 통해 조절되도록 하였다. 유효계면과 무한영역의 물성을 입자의 반경과 체적분율의 함수로 근사한 후, 다양한 입자의 크기와 체적분율에서 나타나는 나노복합재의 물성변화를 예측하였다. 제안된 해석기법의 적용을 통해 분자동역학 전산모사 결과와 잘 일치하는 예측해를 효과적으로 얻을 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제32권4호
• /
• pp.1133-1137
• /
• 2011

Ordered array of gold nanoparticles (Au NPs) over ITO glass was investigated in terms of ITO pretreatment, particle size, and diamines with different chain length. Owing to the indium-tin-oxide (ITO) layer coated on the glass, the substrate surface has a limited number of hydroxyl groups which can produce functionalized amine groups for Au binding, which resulted in the loosely-packed array of Au NPs on the ITO surface. Diamine ligand as a molecular linker was introduced to enhance the lateral binding of adjacent Au NPs immobilized on the amine-functionalized ITO glass, consequently leading to the densely-packed array of Au NPs over the ITO substrate. The molecular bridging effect was strengthened with the increase of chain length of diamines: C-12 > C-8. The packing density of small Au NPs (< 40 nm) was significantly increased with the increase of C-8 diamine, but large Au NPs (> 60 nm) did not produce densely-packed array on the ITO glass even for the dosage of C-12 diamine.

• Bulletin of the Korean Chemical Society
• /
• 제19권9호
• /
• pp.942-947
• /
• 1998

The >$^13C$ NMR spectrum of >$^13CO$ adsorbed on Pd particles varies dramatically depending on dispersion. The spectrum of highly dispersed Pd particles supported on silica is a powder pattern ∼800 ppm wide with a first moment of 410 ppm. A low dispersion sample has a motionally narrowed line centered at 750±30 ppm and only ∼85 ppm full width at half height (FWHH). Over several years, high dispersion samples show an increase in the intensity near 750 ppm. These observations are interpreted as an increase of mobile bridging CO on high dispersion Pd surfaces of particles which resulted from smoothing of the metal particle surfaces in the presence of CO.

• Journal of Pharmaceutical Investigation
• /
• 제40권spc호
• /
• pp.75-82
• /
• 2010

Specific diseases like cancer and acquired immune deficiency syndrome (AIDS) occur at various organs including lymphatics and spread through lymphatic system. Thus, if therapeutic agents for such diseases are more distributed or targeted to lymphatic system, we can obtain several advantages like reduction of systemic side effect and increase of efficacy. For these reasons, much interest has been focused on the nature of lymphatics and a lot of studies for lymphatic delivery of drugs have been carried out. Because lymphatics consist of single layer endothelium and have high permeability compared with blood capillaries, especially, the studies using nano-sized carriers have been performed. Polymeric nano-particle, liposome, and lipid-based vehicle have been adopted for lymphatic delivery as carriers. According to the administration route and the kind of carrier, the extent of lymphatic delivery efficiency of nano-sized carriers has been changed and influenced by several factors such as size, charge, hydrophobicity and surface feature of carrier. In this review, we summarized the key factors which affect lymphatic uptake and the major features of carriers for achieving the lymphatic delivery. Lymphatic delivery of drug using nano-sized carriers has many fold improved ability of lymphatic delivery compared with that of conventional dosage forms, but it has not shown whole lymph selectivity yet. Even though nano-sized carriers still have the potential and worth to study as lymphatic drug delivery technology as before, full understanding of delivery mechanism and influencing factors, and setting of pharmacokinetic model are required for more ideal lymphatic delivery of drug.

• 한국세라믹학회지
• /
• 제38권10호
• /
• pp.936-941
• /
• 2001

5.31 mol% ${Y_2}{O_3}$-4.45 mo1% ${Nb_2}{O_5}$-90.31 mo1% $ZrO_2$에 ${Al_2}{O_3}$를 첨가한 복합체를 제조하여 알루미나 입도가 복합체의 균열 전파 저항성에 미치는 영향을 조사하였다. $ZrO_2/{Al_2}{O_3}$ 복합체에서는 R-cuve 거동이 관찰되었으며 0.2, $2.8{\mu}m$ ${Al_2}{O_3}$가 20 vol%가 첨가된 복합체의 인성값은 각각 7.9, $8.8MPam^{1/2}$이었다. 파괴인성값의 차이는 ${Al_2}{O_3}$ 입도 크기에 의존하는 $ZrO_2/{Al_2}{O_3}$ 복합체 내의 정방정 $ZrO_2$의 결정립 크기 차이에 의한 것으로 추정된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제17권4호
• /
• pp.350-364
• /
• 1995

As early as 1889, treatment of ostemyelitis was reported using xenogeneic demineralized bone. In 1965, Urist discovered that demineralized long bone fragment, even when implanted in nonskeletal tissue, would stimulate osteogenesis. The clinical use of demineralized bone of Oral and Maxillofacial surgery is not new. The demineralized bone implants were used for 1) interposition within osteotomy gaps, cystic detects, alveolar clefts ; 2) augmentation, over intact bone surfaces ; 3) construction of new bone within soft tissue. Demineralized bone grafts invokes a induced osteogenesis which is the transformation of host cells into osteoblasts. Demineralized bone has identified several factors that modulate the osteogeneic response : sterilization method, recipient age, particle size etc. Especially, pulverization of bone matrix may enhance its osteoinductive properties, to allow rapid, efficient bridging of large defects. the purpose of the present report was to describe the potential efficacy of demineralized allogeneic bone powder of skull of rabbits as a particle size ; 212 ${\mu}m$, 710 ${\mu}m$, 1 mm each other. Microscopic finding in our experimental studies shown that 710 ${\mu}m$ demineralized bone powder is the most potent osteogenic response, and then 212 ${\mu}m$, 1 mm size. Densitometric analysis shown that density of all group was continue to increase until 4 weeks after operation, and then continue to decrease.

• 펄프종이기술
• /
• 제42권5호
• /
• pp.74-82
• /
• 2010

Curtain stability without curtain contraction is critical for a successful operation in curtain coating, and this can be influenced by the change in particle dynamics and rheological properties of coating colors. In this study, polyvinyl alcohol (PVA) and carboxymethyl cellulose (CMC) were added to control the rheology of GCC based curtain coating colors. Surface tension was increased slightly with increasing content of cobinder. Shear-thinning of viscosity was more pronounced for the CMC containing GCC coating colors. Complex modulus decreased when small amount of PVA was used as a cobinder, but it increased in other coating colors. Extensional viscosity was increased with increasing of the cobinder content, but CMC was more effective. Results indicate that pigment interaction with PVA is different from that with CMC. Dispersibility of coating colors was improved due to steric stabilization when small amounts of PVA was used, but flocculation occurred by bridging when the amount of PVA was increased. Dispersibility of coating colors was improved when small amount of CMC was added, while flocculation was observed by depletion effect when the concentration of CMC was increased in coating colors. Addition of cobinders at proper levels gave positive effects both in rheological properties and curtain stability. On the other hand, excessive amount of cobinders caused particle flocculation and this resulted in rheological and curtain stablity problems.

• 한국세라믹학회지
• /
• 제31권10호
• /
• pp.1231-1239
• /
• 1994

In this study, gel powder which had relatively high hydration reactivity in CaO and P2O5 rich composition of CaO-P2O5-SiO2-H2O system was prepared by sol-gel process and its hydrated specimen was manufactured. The it was investigated to appropriate calcination temperature in sol-gel process which hydrated specimen of gel powder have proven to strength and the effect of factors influenced strength in hydration process. The major product of before and after hydration reaction was hydroxyapatite, and crystalline phase of C-S-H was already formed during gelation process. After hydration reaction of pressed specimen, crystalline phase of C-S-P-H was formed. It was hydrated product of silicocarnotite (5CaO.P2O5.SiO2). Gel phases of C-S-H and C-S-P-H occured as a result of partial substitution of amorphous silica by P2O5 was formed. The strength of hydrated hardened body is developed by strong bonding and bridging between the gel phases of C-S-H or C-S-P-H and the crystalline products such as hydroxyapatite, Ca(OH)2 C-S-H and C-S-P-H. In addition, the ultrafine gel powder have an great effect on increase of hydration reaction.

• 산업기술연구
• /
• 제7권
• /
• pp.27-47
• /
• 1987

Fine anthracite is very difficult to upgrade by conventional processes such as gravity concentration or froth flotation, because large quantities of fine coals are generated at the mining and preparation stages and a significant portion of these fine coals are mixed with gangue minerals. This study, therefore, was carried out for the purpose of improving recovery of low ash clean coal, effective beneficiation of low-grade coking coal and removal of sulphur from high-sulphur coals by employing the method of selective agglomeration using oil or polystrene flocculants, for coals which are generally hydrophobic in nature will be extracted by using flocculants. Studies were performed by varying solid concentration, concetration of bridging liquid, mixing speed and mixing time, balling speed and balling time, dispersant dosage, flocculant dosage, pulp pH, and particle size. The results were : when the methods of the oil agglomeration and selective flocculation were employ(in the two process the sample was ground to the size of -74 micron), 1) ash content of the agglomerated coal was 9.85, 7.83%, 2) combustibel recovery of it was 98.5%, 93.5%, respectively. It was observed in selective flocculation that polystyrene is an effective flocculant for coal, De-entrapment of shale from the concentrate flocculated by mechanical agitation was necessary for substantional reductions in final ash content.

• Corrosion Science and Technology
• /
• 제9권6호
• /
• pp.247-253
• /
• 2010

The characteristics of selective oxidation prior to hot-dip galvanizing with the annealing atmosphere dew point and chemical composition in dual-phase steels and their effect on the inhibition layer formation relevant to coating adhesion have been studied using a combination of electron microscopic and surface analytical techniques. The annealed and also galvanized samples of 3 kinds of Si/Mn ratios with varied amounts of Si addition were prepared by galvanizing simulator. The dew point was controlled at soaking temperature $800^{\circ}C$ in 15%$H_2$ -85%$N_2$ atmosphere. It was shown that good adhesion factors were mainly uniformity of oxide particle distribution of low number density and low Si/Mn ratio prior to hot-dip galvanizing. Their effect was the greatly reduced coating bare spots and the formation of uniform inhibition layer leading to good adhesion of Zn overlay. The mechanism of good adhesion is suggested by two processes: the formation of inhibition layer on the oxide free surface uncovered with no $SiO_2$-containing particles in particular, and the inhibition layer bridging of oxide particles. The growth of inhibition layer was enhanced markedly by the delayed reaction of Fe and Al with the increase of Si/Mn ratio.