• Tribology and Lubricants
• /
• 제15권3호
• /
• pp.265-271
• /
• 1999

Wherever there are rotating equipment and contact between surface, there is wear and the generation of wear particles. The particles contained in the lubricating oil carry detailed and important information about the condition monitoring of the machine. This information may be deduced from particle shape, composition, size distribution, and concentration. Therefore, This paper was undertaken to Ferrography system of wear debris generated from lubricated moving machine surface. The lubricating wear test was performed under different experimental conditions using the Falex wear test of Pin and V-Block type by Ti(C, N) coated. It was shown from the test results that wear particle concentration (WPC) and wear severity Index( $I_{S}$), size distribution in normal and abnormal wear have come out all the higher value by increases sliding friction time. Wear shape is observed on the Ferrogram it was discovered a thin leaf wear debris as well as ball and plate type wear particles. This kind of large wear shape have an important effect not only metals damage, but also seizure phenomenon.

• 상하수도학회지
• /
• 제24권3호
• /
• pp.333-339
• /
• 2010

Particle removal is an important step taken at water treatment plants (WTPs) for the safety of tap water due to its proportionality to the pathogen inactivation. Government promulgated a treatment technique for the optimization of filtration including continuous turbidity monitoring using on-line turbidimeters. Based on the turbidity measurements of 460 filters at 31 WTPs operated by K-water, the evaluation of filtration performance and the investigation of major causes related to particle breakthrough were explored. 98.1 % of the filters had an effluent turbidity measurement which was less than 0.1 NTU, but turbidity breakthrough of more than 0.3 NTU was noticed occasionally which is in violation of AWWA 5-Star guidelines. It was shown that the optimization of coagulation, filter-to-waste, the observance of optimal filtration velocity and backwashing process based on filtrate turbidity were crucial for the improvement of filtrate.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제25회 춘계학술대회
• /
• pp.224-231
• /
• 1997

Microscopic examination for the morphological estimation of wear debris on the oil-lubrcated moving system is an accepted method for machine condition and fault diagnosis. However wear particle anaysis has not been widely accepted industry because it is dependent on expert interpretation of particle morphology and relies on subjective assessment criteria. This paper was undertaken to estimate the morphology of wear debris on the oil-lubricated movig system by computer image analysis. The wear test was performed under different sliding conditions using a wear test device made in our laboratory and wear testing specimen of the pin-on-disk-type was rubbed in pararline series base oil. In order to describe characteristics of debris of various shape and size, four shape parameters (50% volumetric diameter, aspect, roundness and reflectivity) have been developed and outlined in the paper. A system using such techniques promises to obviate the need for subjective, human interpretation of particle morphology in machine condition monitoring.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제32회 KOSCO SYMPOSIUM 논문집
• /
• pp.181-188
• /
• 2006

Operation parameters for large scale industrial facility such as iron making plant are carefully selected through elaborate tests and monitoring rather than through a mathematical modeling. One of the recent progresses for better energy utilization in iron ore sintering process is the distribution pattern of fuel inside a macro particle which is formed with fines of iron ore, coke and limestone. Results of model tests which have been used as a basis for the improved operation in the field are introduced and a theoretical modeling study is presented to supplement the experiment-based approach with fundamental arguments of physical modeling, which enables predictive computation beyond the limited region of tests and adjustment. A single fuel particle model along with one-dimensional bed combustion model of solid particles are utilized, and thermal processes of combustion and heat transfer are found to be dominant consideration in the discussions of productivity and energy utilization in the sintering process.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2010년도 제42차 하계학술발표논문집 18권2호
• /
• pp.63-66
• /
• 2010

기존의 입자계수기(Particle Counter)는 0.3um의 최소 인식 크기와 샘플링 유량이 2.83 lpm을 갖는다. 본 논문에서는 0.1um의 최소 인식 크기와 샘플링 유량이 28.3lpm과 50lpm을 갖는 입자 계수기를 개발하였다. 이와 함께 온도, 습도, 정전기를 실시간으로 측정하여, 이를 무선 인터페이스를 통해서 모니터링 프로그램과 연동, DB화하여 크린룸 현장의 환경을 실시간으로 유지 관리하도록 하였다.

• 대한환경공학회지
• /
• 제27권12호
• /
• pp.1270-1276
• /
• 2005

대기 중 PAHs의 가스/입자 분배반응이 평형상태일 때 가스/입자분배계수($logK_p$)와 각 화합물의 증기압($logP_L^O$)과 선형식의 기울기가 -1이라는 것이 지금까지 알려진 사실이었다. 기러나 실제 대기에서 일어나는 가스/입자 분배와 차이를 보이는 현상에 대한 연구가 진행되면서 대기 입자의 불균일성 및 입자특성의 차이로 평형상태일 때 가스/입자 분배계수와 증기압과 기울기가 -1이 되지 않을 수도 있다는 주장이 제기되었다. 따라서 본 연구에서 이러한 가설을 토대로 대기 입자의 입경 크기에 따라 시료를 채취하여 평형상태일 때 입경의 크기에 따른 가스/입자 분배를 연구하였다. 대기 중 PAHs의 분배평형상태를 추정하기 위해 High-volume air sampler에서 채취된 입자와 가스를 이용하여 분배계수와 증기압을 구하고 이때 기울기가 -1에 가까운 시료를 평형상태에 있는 시료로 간주하였다. 그러나 평형상태에 해당하는 시료 중 같은 날 동시에 채취한 입경별 입자를 이용하여 각 입경 크기에 따라 분배계수와 증기압의 기울기를 계산한 결과에서는 평형상태일지라도 입경크기에 따라 동일한 기울기를 갖지 않고 입자가 커질수록 기울기가 완만해지는 현상을 나타내었다. 이러한 현상을 규명하기 위해 가스/입자 분배 반응의 두 가지 기작에 대하여 평형상태일 때 기울기가 -1이라는 결과를 도출하기 위해 가정했던 조건에 대하여 검토하였다. 그 결과 가스/입자 분배가 흡착이 주 반응이라 가정했을 때 입자의 크기에 따라 탈착엔탈피 변화량에 차이가 있었으며, 흡수인 경우에는 입자간의 활성계수의 차이를 간접적으로 확인할 수 있었다. 이는 평형상태일 경우에도 입자의 크기에 따라 가스/입자 분배평형에 이르는 정도가 다른 것으로 판단된다. 또한 가스/입자 분배반응 현상을 규명하기 위해서는 입자의 크기를 고려함으로써 그 현상을 좀 더 명확히 밝힐 수 있을 것으로 판단된다.

• 에너지공학
• /
• 제20권1호
• /
• pp.21-25
• /
• 2011

본 연구에서는 방사성 폐기물을 처리하는 원통형 회전 분리기를 감시하기 위해 전기 저항법을 제안하고 수학적 모델을 연구하였다. 회전형 방사성 폐기물 분리기에서 관 벽에 설치된 한 쌍의 전극의 전기 저항은 표면을 따라 형성된 불용해성 입자의 환상 영역의 두께와 그 영역의 불용해성 입자의 농도와 관련이 있다. 본 연구는 전위 방정식에 대한 2차원 해와 실험적인 전도도-농도 관계를 기반으로 전술한 인자들 사이의 해석적 관계를 기술하였다. 또한, 원통형 회전 분리기를 감시하기 위한 전기 저항법의 적용 가능성을 논의 하였다.

• Journal of Astronomy and Space Sciences
• /
• 제35권3호
• /
• pp.175-183
• /
• 2018

Many recent satellites have mission periods longer than 10 years; thus, satellite-based local space weather monitoring is becoming more important than ever. This article describes the instruments and data applications of the Korea Space wEather Monitor (KSEM), which is a space weather payload of the GeoKompsat-2A (GK-2A) geostationary satellite. The KSEM payload consists of energetic particle detectors, magnetometers, and a satellite charging monitor. KSEM will provide accurate measurements of the energetic particle flux and three-axis magnetic field, which are the most essential elements of space weather events, and use sensors and external data such as GOES and DSCOVR to provide five essential space weather products. The longitude of GK-2A is $128.2^{\circ}E$, while those of the GOES satellite series are $75^{\circ}W$ and $135^{\circ}W$. Multi-satellite measurements of a wide distribution of geostationary equatorial orbits by KSEM/GK-2A and other satellites will enable the development, improvement, and verification of new space weather forecasting models. KSEM employs a service-oriented magnetometer designed by ESA to reduce magnetic noise from the satellite in real time with a very short boom (1 m), which demonstrates that a satellite-based magnetometer can be made simpler and more convenient without losing any performance.

• Smart Structures and Systems
• /
• 제9권4호
• /
• pp.335-353
• /
• 2012

This study suggests a simple two-step method for structural vibration-based health monitoring for beam-like structures which only utilizes mode shape curvature and few natural frequencies of the structures in order to detect and localize cracks. The method is firstly based on the application of wavelet transform to detect crack locations from mode shape curvature. Then particle swarm optimization is applied to evaluate crack depth. As the Rayleigh quotient is introduced to estimate natural frequencies of cracked beams, the relationship of natural frequencies and crack depths can be easily obtained with only a simple formula. The method is demonstrated and validated numerically, using the numerical examples (cantilever beam and simply supported shaft) in the literature, and experimentally for a cantilever beam. Our results show that mode shape curvature and few estimated natural frequencies can be used to detect crack locations and depths precisely even under a certain level of noise. The method can be extended for health monitoring of other more complicated structures.

• 한국입자에어로졸학회지
• /
• 제7권1호
• /
• pp.31-44
• /
• 2011

The hourly volatile organic compounds(VOCs) concentrations between 2005 and 2008 at Bulgwang photochemical assessment monitoring station were investigated to establish a method for quality assurance and quality control(QA/QC) procedure. Systematic error, erratic error, and random error, which was manifested by outlier and highly fluctuated data, were checked and removed. About 17.3% of the raw data were excluded according to the proposed QA/QC procedure. After QA/QC, relative standard deviation for representing 15 species concentrations decreased from 94.7-548.0% to 63.4-125.8%, implying the QA/QC procedure is proper. For further evaluation about the adequacy of QA/QC procedure, principal components analysis(PCA) was carried out. When the data after QA/QC procedure was used for PCA, the extracted principal components were different from the result from the raw data and could logically explain the major emission sources(gasoline vapor, vehicle exhaust, and solvent usage). The QA/QC procedure based on the concept of errors is inferred to proper to be applied on VOCs. However, an additional QA/QC step considering the relationship between species in the atmosphere needs to be further considered.