• 한국축산식품학회지
• /
• 제38권6호
• /
• pp.1294-1304
• /
• 2018

The aims of this research were to examine the effect of heating temperature (65, 75, and $85^{\circ}C$) and $CaCl_2$ concentration level (3, 4, and 5 mM) on the physicochemical properties of ${\beta}$-lactoglobulin (${\beta}$-lg) nanoemulsions (NEs) and to study how the droplet size of NEs affects the bioaccessibility (BA) of coenzyme $Q_{10}$ ($CoQ_{10}$). The droplet size of NEs and BA of $CoQ_{10}$ was assessed by particle size analyzer and UV-Vis spectrophotometer, respectively. An increase in heating temperature and $CaCl_2$ concentration level resulted in a significant (p<0.05) increase in the droplet size of NEs while there were no significant differences in polydispersity index and zeta-potential of NEs. When NEs containing $CoQ_{10}$ were incubated in simulated small intestinal phases, an increase in the droplet size and polydispersity index of NEs was observed. This indicated that NEs were not stable in small intestine and digestion of NEs occurred. As heating temperature and $CaCl_2$ concentration level were decreased, a significant (p<0.05) increase in BA of $CoQ_{10}$ was observed. There was a significant (p<0.05) increase in BA of $CoQ_{10}$ with a decrease in the droplet size of NEs. In conclusion, heating temperature and $CaCl_2$ concentration level were key-parameters affecting the initial droplet size of NEs and BA of $CoQ_{10}$ was negatively correlated with initial droplet size of NEs.

• 대기
• /
• 제28권4호
• /
• pp.469-477
• /
• 2018

We performed the comparison of observed $PM_{10}$ and $PM_{2.5}$ at both the Yonsei University and the AIRKOREA site in the same Seodaemun-gu district, Seoul from March to December 2016. Generally, the moderate correlations between two sites were found for both $PM_{10}$ and $PM_{2.5}$, but monthly difference was somewhat occurred, implying that the measurement situation is not equally maintained even in a closely located area. Particularly correlations became weaker in June and July, which seems the impact of rainy conditions. Correlations between two stations were higher for $PM_{10}$ compared to $PM_{2.5}$, probably indicating the spatially larger difference of fine mode particle. Monthly mean variation was similar between two sites showing a maximum in March and minimum in August. Diurnal variation was somewhat different: morning peak at Yonsei University but evening peak at the Seodaemun-gu AIRKOREA site, reflecting the difference of local air condition. We also compared the extent of $PM_{10}$ and $PM_{2.5}$ according to the local wind speed and direction. In general, the level of particulate matter was high when the wind is blowing from the northwestern area with low wind speed, meaning the high accumulation effect of transported air particles. Findings of this study can be usefully considered for the investigation about the discrepancy of aerosol measurement in a local scale.

• 한국추진공학회지
• /
• 제22권5호
• /
• pp.125-131
• /
• 2018

다단연소사이클 엔진의 추진제는 예연소기에서 일부 연소되고, 연소된 고온의 가스는 터빈을 구동하고 터빈은 터보펌프를 작동시킨다. 터보펌프의 터빈을 통과한 연소가스는 고온 고압의 상태로 연소기로 공급되는데, 이때 연료 또는 산화제의 양에 따라 연소가스는 연료 과잉 또는 산화제 과잉 상태로 공급된다. 산화제 과잉상태의 환경에서 금속 배관은 작은 입자의 충격에 의해서도 발화 또는 폭발될 수 있다. 이를 방지하기 위해 로켓 선진 국가에서는 산화제가 이동하는 공간에 내산화 코팅을 한다. 본 연구에서는 해외 내산화 코팅 물질 분석을 통해 국산 조합분말을 개발하였고 내산화 코팅 공정을 확립하였다.

• 한국항공우주학회지
• /
• 제47권1호
• /
• pp.26-34
• /
• 2019

본 논문에서는 이산요소법을 이용하여 성긴 달토양 수치해석모델을 생성하고 그 정확도를 실제 달토양의 물리적 특성과 비교 및 검증한다. 실제 달의 표면은 다수의 분화구와 바위로 구성되어 있고 매우 미세한 건조토양으로 덮여있으므로 달토양 특성은 달착륙선의 착륙안정성을 결정짓는 중요한 인자이다. 따라서 달토양특성을 고려하기 위해 이산요소법을 이용하여 달토양의 수치해석모델을 생성하고 검증한다. 달토양 압입시험 및 직접전단시험을 해석적으로 구현하여 해석용 달토양이 실제 달토양과 유사한 물리적 특성(압입깊이, 점착력, 내부마찰각 등)을 갖는 것을 확인한다. 이렇게 생성한 달토양 모델 위에 single-leg 착륙장치 유한요소모델을 낙하시키는 해석을 통해 착륙장치 스트럿에 가해지는 충격하중을 예측하고 시험결과와 비교하여 제안된 방법의 적절성을 검토한다.

• Advances in nano research
• /
• 제10권3호
• /
• pp.221-234
• /
• 2021

During the previous few years, phenomenon of bioconvection along with the use of nanoparticles showed large number of applications in technological and industrial field. This paper analyzed the bioconvection phenomenon in magnetohydrodynamic boundary layer flow of a Powell-Eyring nanoliquid past a stretchable cylinder with Cattaneo-Christov heat flux. In addition, the impacts of chemical reaction and heat generation/absorption parameter are considered. By the use of appropriate transformation, the governing PDEs (nonlinear) have been transformed and formulated into nonlinear ODEs. The resulting nonlinear ODEs subjected to relevant boundary conditions are solved analytically through homotopy analysis method which is programmed in Mathematica software. Graphical and numerical results versus physical quantities like velocity, temperature, concentration and motile microorganism are investigated under the impact of physical parameters. It is noted that velocity profile enhances as the curvature parameter A and Eyring-Powell fluid parameter M increases but a decline manner for large values of buoyancy ratio parameter Nr and bio-convection Rayleigh number Rb. In the presence of Prandtl number Pr, Eyring-Powell fluid parameter M and heat absorption parameter ��, temperature profile decreases. Nano particle concentration profile increases for increasing values of magnetic parameter Ha and thermophoresis parameter Nt. The motile density profile has revealed a decrement pattern for higher values of bio-convection Lewis number Lb and bio-convection peclet number Pe. This study may find uses in bio-nano coolant systems, advance nanomechanical bio-convection energy conversion equipment's, etc.

• 한국건설순환자원학회논문집
• /
• 제9권2호
• /
• pp.161-166
• /
• 2021

본 연구는 순환골재에서 발생하는 오염물질의 특성과 오염가능성을 평가하기 위해 생산제품 순환골재의 용출시험을 실시하였다. 순환골재에 포함된 pH, 전기전도도, 탁도, TN, TP, COD 그리고 중금속 농도는 입경이 작을수록 높은 농도를 나타냈다. pH 농도는 9.9~11.4 범위로 토양보다는 높았으나 중금속 농도는 토양오염우려기준의 1지역 기준치 이내로 조사되었다. 용출시험 결과, 오염가능성은 입자크기가 작을수록 높아지는 것으로 나타났다. 특히, 전기전도도와 탁도는 잠재적인 수질오염원이며, 10mm 이하의 순환골재는 용존성과 입자성 오염물질을 발생시킬 수 있기 때문에 잠재적인 오염원으로 평가되었지만, 현재 적절한 관리기준은 없다. 순환골재로 부터 수질오염 가능성을 평가한 결과, 오염가능성이 가장 높은 항목으로는 pH, 오염가능성이 낮은 항목으로는 TN, TP, 오염가능성이 가장 낮은 항목으로는 중금속으로 나타났다.

• Computers and Concrete
• /
• 제29권 6호
• /
• pp.375-391
• /
• 2022

This paper examined the impact of the cross-sectional structure on the structural results under different loading conditions of reinforced concrete (RC) members' management limited in Carbon Fiber Reinforced Polymers (CFRP). The mechanical properties of CFRC was investigated, then, totally 32 samples were examined. Test parameters included the cross-sectional shape as square, rectangular and circular with two various aspect rates and loading statues. The loading involved concentrated loading, eccentric loading with a ratio of 0.46 to 0.6 and pure bending. The results of the test revealed that the CFRP increased ductility and load during concentrated processing. A cross sectional shape from 23 to 44 percent was increased in load capacity and from 250 to 350 percent increase in axial deformation in rectangular and circular sections respectively, affecting greatly the accomplishment of load capacity and ductility of the concentrated members. Two Artificial Intelligence Models as Extreme Learning Machine (ELM) and Particle Swarm Optimization (PSO) were used to estimating the tensile and flexural strength of specimen. On the basis of the performance from RMSE and RSQR, C-Shape CFRC was greater tensile and flexural strength than any other FRP composite design. Because of the mechanical anchorage into the matrix, C-shaped CFRCC was noted to have greater fiber-matrix interfacial adhesive strength. However, with the increase of the aspect ratio and fiber volume fraction, the compressive strength of CFRCC was reduced. This possibly was due to the fact that during the blending of each fiber, the volume of air input was increased. In addition, by adding silica fumed to composites, the tensile and flexural strength of CFRCC is greatly improved.

• Nuclear Engineering and Technology
• /
• 제55권5호
• /
• pp.1734-1741
• /
• 2023

This work presents the synthesis and preparation of a new glass system described by the equation of (70-x) B₂O₃-5TeO₂ -20SrCO₃-5ZnO -xBi₂O₃, x = 0, 1, 5, 10, and 15 mol. %, using the melt quenching technique at a melting temperature of 1100 ℃. The photon-shielding characteristics mainly the linear attenuation coefficient (LAC) of the prepared glass samples were evaluated using Monte Carlo (MC) simulation N-particle transport code (MCNP-5) at gamma-ray energy extended from 59 keV to 1408 keV emitted by the radioisotopes Am-241, Ba-133, Cs-137, Co-60, Na-22, and Eu-152. Furthermore, we observed that the Bi₂O₃ content of the glasses had a significantly stronger impact on the LAC at 59 and 356 keV. The study of the lead equivalent thickness shows that the performance of fabricated glass sample with 15 mol.% of Bi₂O₃ is four times less than the performance of pure lead at low gamma photon energy while it is enhanced and became two times lower the perforce of pure lead at high energy. Therefore, the fabricated glasses special sample with 15 mol.% of Bi₂O₃ has good shielding properties in low, intermediate, and high energy intervals.

• Advances in nano research
• /
• 제13권4호
• /
• pp.313-323
• /
• 2022

The microstructure and mechanical properties of Cr-Ni steel and Cr-Ni steel-matrix nanocomposites reinforced with nano-ZrO₂ particles were investigated in this study. Cr-Ni steel and Cr-Ni/ZrO₂ nanocomposites were produced using a combination of high-energy ball milling, pressing, and sintering processes. The microstructures of the specimens were analyzed using EDX and XRD. Compression and hardness tests were performed to determine the mechanical properties of the specimens. Nano-ZrO₂ particles were effective in preventing chrome carbide precipitate at the grain boundaries. While t-ZrO₂ was detected in Cr-Ni/ZrO₂ nanocomposites, m-ZrO₂ could not be found. Few α'-martensite and deformation bands were formed in the microstructures of Cr-Ni/ZrO₂ nanocomposites. Although nano-ZrO₂ particles had a negligible impact on the strength improvement provided by deformation-induced plasticity mechanisms in Cr-Ni/ZrO₂ nanocomposites, the mechanical properties of Cr-Ni steel were significantly improved by using nano-ZrO₂ particles. The hardness and compressive strength of Cr-Ni/ZrO₂ nanocomposite were higher than those of Cr-Ni steel and enhanced as the weight fraction of nano-ZrO₂ particles increased. Cr-Ni/ZrO₂ nanocomposite with 5wt.% nano-ZrO₂ particles had almost twofold the hardness and compressive strength of Cr-Ni steel. The nano-ZrO₂ particles were considerably more effective on particle-strengthening mechanisms than deformation-induced strengthening mechanisms in Cr-Ni/ZrO₂ nanocomposites.

• 한국지반공학회논문집
• /
• 제39권11호
• /
• pp.23-31
• /
• 2023

콘크리트 궤도의 침하는 고속열차의 안전한 운행을 크게 저해할 수 있으며 복구에 상당한 비용이 소요되므로 최근 큰 문제로 대두되고 있다. 침하의 가장 큰 원인 중 하나는 터널공사의 부산물로 발생하는 암석재료를 적정한 입도분를 가진 토사 혼합 없이 하부노반 성토에 사용하기 때문으로 보고되고 있다. 본 논문에서는 암석재료로 성토된 하부노반의 부분 보강으로 인한 침하억제 효과를 수치해석으로 평가하였다. 하부노반에 일정하게 배치된 기둥 형태의 보강 영역은 상부노반에 지반아칭을 유발하게 되며 성토하중이 보강된 영역에 집중하게 되어 침하가 억제되는 효과가 있다. 유한요소해석을 통하여 보강된 영역의 크기, 강성, 간격이 하부노반의 침하억제에 미치는 효과를 평가하였으며, 해석 결과를 토대로 침하를 허용치 이내로 억제하기 위한 최소 보강 간격을 결정하는 설계 방법을 제안하였다.