• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.8
• /
• pp.1771-1776
• /
• 2011

In this paper, as an attempt to improve the preparation conditions of $YBa_2Cu_3Ox$ superconducting bulk samples, the properties of $YBa_2Cu_3Ox$ superconductor depending on the particle size of YBCO powder and $BaPbO_3$ as an additive have been investigated, and a study on the effects of additive to the density, grain alignment, and porosity of samples that affect the critical current of superconductor has been performed. In order to prepare superconductor, $YBa_2Cu_3Ox$ powder synthesized by sol-gel method, showing a size distribution of 0.2~1 ${\mu}m$ was used. The $BaPbO_3$ added to promote grain growth and to decrease porosities and weak links between grain boundaries of $YBa_2Cu_3Ox$ superconductors. In the samples prepared by sol-gel synthesized powder with 10, 20, and 30 wt% conductive $BaPbO_3$ additives, the sample with 20 wt% $BaPbO_3$ obtained the highest critical current of 4.74 A, showing 20 wt% higher critical current than that with solid state synthesized powder.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.1
• /
• pp.40-49
• /
• 2004

This work carried out to define the characteristic of Cymbidium kanran habitat at Mt. Halla in Jejudo, Korea from the ecological point of view including geological and topographical features, air and soil temperature, relative humidity, fluctuations of light intensity, habitat vegetation, distribution altitude, area limit, and etc. And another goal of this study consider the conservation counterplan of the cymbidium habitat. Natural distribution areas of the cymbidium were observed more abundantly on the well drained south and east-facing slopes. Soil acidity was ranged from pH 4.1 to 5.3, and electric conductivity was ranged from 176.4 to 299.9 us/cm (average 215.3 us/cm). Base-saturation percentage of the habitat soil was below 50%, bulk density 0.42g/$cm^2$, particle density 2.05g/$cm^2$, humus content 26%, total nitrogen 0.82%, available phosphate 4.2 mg/kg, exchangeable potassium 0.63 Cmol/kg, calcium 0.44 Cmol/kg and magnesium 0.67 Cmol/kg. Annual mean air temperature was $15.4^{\circ}C$, however, air temperature was ranged $11.7{\sim}18.2^{\circ}C$ in spring, $21.2{\sim}23.8^{\circ}C$ in summer, $12.8{\sim}22.0^{\circ}C$ in fall and $5.5{\sim}7.8^{\circ}C$ in winter season. Annual mean soil temperature at depth of 10cm was $13.2^{\circ}C$ And minimum value was recorded $4.7^{\circ}C$ on January, and maximum value $22.5^{\circ}C$ on August. Relative humidity was ranged 90.8~94.7% in summer, 80.8~91.5% in fall and 77.6~84.2% in winter season. Minimum value was 56.5% on December, and maximum value was 100% on July and August. Light intensities were ranged from 400 to 1,800 lux at the greater part of Cymbidium kanran sites in Jejudo. Summer regarded as an lower light intensities was recorded to be range of 500~600 lux; however, autumn and winter were shown higher light regimes ranged from 3,500 to 3,800 lux. Therefore, one must be suprised that the cymbidium grow at the light condition of 6 lux (minimum) or 10,000 lux (maximum). Tree species keeping higher frequency rate and density were Eurya japonica, Camellia japonica, Castanopsis cuspidata, Carpinus laxiflora and Pinus densiflora. Number of trees growing in a 5${\times}$5m quardrat was 35 as an average, and proportion of evergreen versus deciduous was 5:1. Distribution altitude of the orchid habitat was ranged from 120m (low) to 840m (high) from sea level on the south facing slope of Mt. Halla, and was ranged eastern borderline of Gujwaup, Bukjejugun to western boundaries of Jungmundong, Seogwipo city. For the stable conservation of Cymbidium kanran habitat, sunlight regimes must be increased more by means of cutting trees or twigs in the site.

• Journal of Wetlands Research
• /
• v.22 no.4
• /
• pp.295-301
• /
• 2020

This research analyzed the relationship between environmental factors and the density of Sycios angulatus in the Miho Stream, Geum River water system in order to secure basic data for the control of the ecosystem-distrubing plant Sycios angulatus. As a result of the soil particle size analysis of Sycios angulatus habitat, it was found that the density of Sycios angulatus decreased as the silty and clay contents increased. Most of the Sycios angulatus habitats had high sandy and silt content, and low clay content of less than 2%. The increased flow rate reduced the density of Sicyos angulatus. This is because when the flow rate is increased, the Sicyos angulatus cannot grow due to the change in soil characteristics. Water quality plays a role in supplying nutrients when Sicyos angulatus are submerged. However, due to the change in soil characteristics during flooding, the density of Sicyos angulatus tended to decrease due to impaired growth. The Sicyos angulatus can be managed through artificial and natural techniques. The appropriate natural control technique is the creation of a natural waterway in the habitats to change the water contents.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.727-731
• /
• 2008

Mesoporous Pt-Au alloy films were successfully fabricated on ITO-coated glass by electrodeposition method using tri-blockcopolymer (P123) as a templating agent. The electrolyte consisted of 10 mM hydrogen hexachloroplatinate ($H_2PtCl_6$), 10 mM hydrogen tetrachloroaurate ($HAuCl_4$), and proper amount of P123. For comparison, control samples were electrodeposited without $HAuCl_4$ and P123. Film composition was determined by EDS(Energy Dispersive X-ray Spectroscopy), and the mesoporous structure was confirmed by TEM(Transmission Electron Microscopy). SEM(Scanning Electron Microscopy) was utilized to examine surface morphology, and it was observed that the addition of P123 affected the particle growth, resulting in the significant change of surface morphology. Methanol oxidation and CO oxidation were carried out to investigate electrocatalytic activities of synthesized samples. It was observed that the catalytic activity was strongly dependent on the film compositions. Compared with nonporous electrode prepared without P123 templating, mesoporous films prepared with P123 templating showed much higher catalytic activities and stability for both methanol oxidation and CO oxidation. These enhanced electrocatalytic activities were due to the high surface area and facilitated charge transfer of mesoporous films.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.958-964
• /
• 2008

In this work, micro-sized dextran particles, which have recently been focused as one of the candidate materials for the Drug Delivery System(DDS), were prepared by means of the Supercritical Antisolvent (SAS) process with $CO_2$. With dimethyl sulfoxide(DMSO) as the solvent, effects of the operating variables such as temperature (308.15~323.15 K), pressure(90~130 bar), solute concentration(10~20 mg/ml), and the molecular weight of the solute(Mw=37,500, 450,000) on the size and morphology of the resulting particles were thoroughly observed. The higher solute concentration led to the larger particles, however, the injection velocity of the solution and pressure did not show significant effects on the resulting particle size. With dextran of the lower molecular weight, the smallest particles were obtained at 313.15 K. On the other hand, the size of the particles from the high molecular weight dextran ranged between $0.1{\sim}0.5{\mu}m$ with an incremental effect of the temperature and pressure. For the solute concentration of 5 mg/ml, the lower molecular weight dextran did not form discrete particles while aggregation of the particles appeared when the solute concentration exceeded 15 mg/ml for the higher molecular weight dextran. It is believed that if the solute concentration is too low, the degree of the supersaturation in the recrystallization chamber would not be sufficient for initiation of the nucleation and growth mechanism. Instead, the spinodal decomposition mechanism leads to formation of the island-like phase separation which appears similar to aggregation of the discrete particles. This effect would be more pronounced for the smaller molecular weight polymer system due to the narrower phase-splitting region.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.1169-1176
• /
• 2014

In this study, water-dispersible ZnS:Mn nanocrystals were synthesized by capping the surface with conventional and simple structured amino acid ligands: $\small{L}$-Glycine and $\small{L}$-Alanine. The ZnS:Mn-Gly and ZnS:Mn-Ala nanocrystal powders were characterized by XRD, HR-TEM, EDXS, ICP-AES, and FT-IR spectroscopy. The optical properties were measured by UV-Visible and photoluminescence (PL) spectroscopy. The PL spectra for the ZnS:Mn-Gly and ZnS:Mn-Ala showed broad emission peaks at 599 nm and 607 nm with PL efficiencies of 6.5% and 7.8%, respectively. The measured average particle size from the HR-TEM images were $6.4{\pm}0.8$ nm (ZnS:Mn-Gly) and $4.1{\pm}0.5$ nm (ZnS:Mn-Ala), which were also supported by Debye-Scherrer calculations. In addition, the degree of aggregation of the nanocrystals in aqueous solutions were measured by a hydrodynamic light scattering method, which showed formation of sub-micrometer size aggregates for both ZnS:Mn-Gly ($273{\pm}94$ nm) and ZnS:Mn-Ala ($233{\pm}34$ nm) in water due to the intermolecular attraction between the capping amino acids molecules. Finally, the cytotoxic effects of ZnS:Mn-Gly and ZnS:Mn-Ala nanocrsystals over the growth of wild type E. coli were investigated. As a result, no toxicity was shown for the ZnS:Mn-Gly nanocrystal in the colloidal concentration region from 1 ${\mu}g/mL$ to 1000 ${\mu}g/mL$, while ZnS:Mn-Ala showed significant toxicity at 100 ${\mu}g/mL$.

• Asian Journal of Turfgrass Science
• /
• v.17 no.1
• /
• pp.19-33
• /
• 2003

The objective of this study was to evaluate the effects of crumb rubber recycled from used tires as a soil incorporation and topdressing materials on a trafficked Korean lawngrass‘Zenith’(Zoysia japonica). In Exp 1, incorporation treatments included three particle sizes (PS: coarse =4∼6.35 mm, medium =2∼4 mm, and One : less than 2 mm in diameter) and two incorporation rate (IR: 10 and 20%). Wear treatments were applied 30 passes per day by compactor weights being 60 kg with soccer shoes. Topdressing treatments included three PS and two topdressing depth (TD: 5 and 10 mm). Wear treatments were the same as described in Exp 1. In Exp 1, the treatment with medium PS+IR 20 resulted in the tendency to have high total clipping yield. There was no significant difference in clipping yield, turfgrass visual color, coverage, and root length among the treatments. Compared to control, tissue Zn levels increased about 6.5-fold by the treatments. The treatment with fine PS +IR 20 caused a less peak deceleration than coarse PS +IR 10. Total porosity, air-filled porosity, and capillary porosity increased with fine PS +IR 20. In Exp 2, compared to controls, however, there was a difference in turfgrass visual color after the termination of traffic treatment. There was no difference in root length. The treatment with fine PS + TD 10 resulted in the highest total clipping yield. As a result of soil physical analysis, soil penetration resistance was reduced by the treatments. The treatment with coarse PS resulted in a less peak deceleration than fine PS. In conclusion, turfgrass growth was increased by crumb rubber incorporation which enhanced soil physical properties. The crumb rubber topdressing was able to cushion the crown tissue area while still providing a smooth and uniform surface, improve overall turfgrass quality, and reduce compaction.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.5
• /
• pp.484-491
• /
• 2015

The productivity of Manila clam(Ruditapes philippinarum) aquaculture farm is closely related to suitable site selection, so it is essential to assess the habitat suitable for aquaculture species in order to manage yield. This study evaluated the habitat suitable index(HSI) with 9 sites for tidal flat farm, Gochang(Hajun) on May 2014. The suitability index was selected Growth(hydrodynamics, chlorophyll a), Survival(sediment-sand, silt-clay) and Water Environment(dissolved oxygen, salinity). Both Weight and No weight were tried for objective judgment as HSI scoring method. As a result, it shows lower tidal flat(HSI; No weight: 0.60~0.76, Weight: 0.47~0.70) is higher than upper(HSI; No weight: 0.25~0.27, Weight: 0.09~0.10), hydrodynamics and sediment particle size are the most effective. This research can consider the potential suitable site for Manila clam through scientific approach, and provide the basis for optimal management practices in tidal flat farm.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.82-89
• /
• 2009

According to the great city development and the rapid growth of redevelopment project, waste concrete emission has been increased. Waste concrete powder is one of the by-product originated from the recycling of the waste concrete. The more making high quality recycled aggregate to use aggregate for concrete, the more waste concrete powder is producted relatively. Therefore, to realize the total recycling of waste concrete, development of recycling technology for waste concrete powder need very much. This technical note present the discharged process and the various properties of waste concrete powder. As the results, on the average, the maximum particle-size of waste concrete powder is less than $600{\mu}m$, and oven-dry density is less than $2.5g/cm^3$. And waste concrete powder contains more than 50% of $SiO_2$, 30% of CaO and 10% of $Al_2O_3$. Thus qualities of waste concrete powder is lower than those of high quality raw material for concrete. However, if it is processed by grading to the purpose, it will be used as resource of raw materials for construction field.

• Resources Recycling
• /
• v.18 no.6
• /
• pp.30-37
• /
• 2009

Silica sol was prepared from the mixture of sodium silicate solution and oxidized silicate solution in which sodium had been removed by sol-gel process. The properties of sodium silicate solution and silicate solution thus prepared were characterized by yellow silicomolydate method. Moreover, the formation and growth of silica sol from sodium silicate solution was investigated. Sodium silicate solution with 2% of $SiO_2$ contains 95% of reactive silicate, and 50% of reactive silicate participates sol-gel reaction. From the results of FT-IR analysis, it was found that the intensity of silanol bond decreased and the intensity of siloxane bond increased with increasing reaction temperature. Zeta potential of silica sol prepared at each condition was -40~-60 mV and it could be known that silica sol in this study was well dispersed. The silica sol with 5~10 nm size could be prepared by heating the mixed solution of sodium silicate and silicate solution. And the silica sol grew into about 20 nm as silicate solution was added to silica sol solution.