• Fisheries and Aquatic Sciences
• /
• v.8 no.2
• /
• pp.65-69
• /
• 2005

We evaluated the effects of the partial dietary replacement of fish meal with squid liver $Meal^{TM}$ on the growth and body composition of juvenile olive flounder Paralichthys olivaceus during the winter season. Twenty-five fish with an initial body weight of 23 g per tank were distributed among 12,250 L flow-through tanks. The experimental diets, which were designated SLM5, SLM1O, and SLM15 diets, were prepared in triplicate along with control diet by replacing 5, 10, and $15\%$ of mackerel fish meal with squid liver $Meal^{TM}$, respectively. The weight gain and specific growth rate of flounder that were fed the control and SLM5 diets did not differ from those of the fish fed the SLM10 diet, but they were significantly (P<0.05) higher than those of the fish fed the SLM15 diet. The feed efficiency ratios for the flounder that were fed the control, SLM5 and SLM10 diets were significantly (P<0.05) higher than for the fish that were fed the SLM15 diet. However, the protein efficiency ratio for the flounder was not significantly affected by the experimental diets. The crude protein, crude lipid and ash content, and blood chemistry of the flounder were not significantly affected by the experimental diets. Therefore, the replacement of up to $10\%$ of dietary fish meal with squid liver $Meal^{TM}$ can be made without a reduction in growth or a deterioration of the feed efficiency of juvenile olive flounder during the winter season.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.12
• /
• pp.1268-1272
• /
• 2008

Low temperature plasma applied with partial oxidation is a technique to produce synthesis gas from methane. Low temperature plasma reformer has superior miniaturization and start-up characteristics to reformers using steam reforming or CO$_2$ reforming. In this research, a low temperature plasma reformer using GlidArc discharge was proposed. Reforming characteristics for each of the following variables were studied: gas components ratio (O$_2$/CH$_4$), the amount of steam, comparison of reaction on nickle and iron catalysts and the amount of CO$_2$. The optimum conditions for hydrogen production from methane was found. The maximum Hydrogen concentration of 41.1% was obtained under the following in this condition: O$_2$/C ratio of 0.64, total gas flow of 14.2 L/min, catalyst reactor temperature of 672$^{\circ}C$, the amount of steam was 0.8, reformer energy density of 1.1 kJ/L with Ni catalyst in the catalyst reactor. At this point, the methane conversion rate, hydrogen selectivity and reformer thermal efficiency were 66%, 93% and 35.2%, respectively.

• Journal of the Korean Institute of Gas
• /
• v.16 no.6
• /
• pp.17-22
• /
• 2012

In this study, characteristics of reforming process of Automotive LPG fuel using plasma reactor are investigated. Because plasma reformer technology has advantages of a fast start-up and wide fuel/oxidizer ratio of operation, and reactor size is smaller and more simple compared to typical combustor and catalytic reactor, plasma reforming is suitable to the on-board vehicle reformer. To evaluate the characteristics of the reforming process, parametric effect of $O_2$/C ratio, reactant flow rate and plasma power on the process were investigated. In the test of varying $O_2$/C ratio from partial oxidation stoichiometry to combustion stoichiometry, conversion of LPG was increased but selectivity of $H_2$ decreased. The optimum condition of $O_2$/C ratio for the highest $H_2$ yield was determined to be 0.8~0.9 for 20~50 lpm. The result can be a guide to map optimal condition of reforming process.

• Biomedical Science Letters
• /
• v.14 no.4
• /
• pp.219-223
• /
• 2008

The present study was designed to clarify whether scuba diving at 5 meters of seawater influences cerebral hemodynamics, hematological and biochemical variables. Twenty healthy young men well trained scuba diving participated in this study. The blood flow velocity in the right and left middle cerebral arteries (L-MCAV and R-MCAV), blood pressure (BP), heart rate (HR), CBC and differential count, prothrombin time (PT), activated partial thromboplastin time (aPTT), biochemical variables, D-dimer and interleukin-8 (IL-8) levels were determined before, immediately after scuba diving for 30 min, and after 30 min of rest (Pre-scuba, Scuba and R-30m, respectively). L-MCAV and R-MCAV tended to increase, but the only significant increase was in L-MCAV in Scuba. SBP and HR significantly declined in R-30m compared with those of Pre-scuba and the Scuba. IL-8 levels were elevated in Scuba and R-30m compared with that of Pre-scuba. In Scuba and R-30m, hematological variables except PT and biochemical parameters excluding glucose and lactic acid did not significantly changed in comparison with those of Pre-scuba. PT level at Scuba and glucose level at R-30m significantly declined in Scuba, while lactate level at R-30m increased compared with each in Pre-scuba. However, PT level at Scuba was within a normal range. These results suggest that scuba diving at 5 m of seawater for 30 min has no adverse effects, is safe and useful for improving health. However, further study must be performed to clarify the mechanism of elevated IL-8 level following scuba diving.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.27 no.1
• /
• pp.40-44
• /
• 2016

Background and Objectives : Surgery is considered the primary treatment for intracordal cyst. However, patients who had undergone surgery are still subject to recurrence and continued voice changes. Intracordal cysts naturally disappear in some patient population. Cyst does not always recur in patients who had received partial surgical removal, too. Contradicting results raises a question whether complete surgical removal of intracordal cyst is necessary and demonstrate need for better treatment. Herein, the author proposes novel surgical method technique intralaryngeal needle technique (INT), a technique using surgical needle for not only injection but also for aspiration and excision of cyst. This study aims to examine the potential of intralaryngeal needle technique in treating intracordal cysts. Materials and Methods : Surgical procedures were done on in-patients diagnosed with intracordal cyst. 23 patients received follow-up screening after the surgery for one year. Patients' subjective satisfaction levels, acoustic measures, aerodynamic measures, laryngeal stroboscopic results were compared before and after the treatment. Results : Overall patients were satisfied with novel surgical excision method. In terms of aerodynamic measures, maximum phonation time, mean air flow rate improved after the surgery. In terms of acoustic measures, Jitter, Shimmer, NHR, and voice pitch changes after the treatment showed statistically significant differences. Laryngeal stroboscopy results showed significant decreases in cyst sizes. Post-surgery patients had improved mucosal waves and amplitudes values. Conclusion : The results show the validity of intralaryngeal needle technique in reducing intracordal cyst size by excision, aspiration, and injection. The author believes this novel technique can be used as an alternative surgical method for intracordal cysts.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.3
• /
• pp.34-43
• /
• 1987

This study was performed to find out the types of linkage of carbohydrates in wood cell walls. To study the structure of linkage of carbohydrates in wood cell walls, we have attempted to find out the method holocellulose preparation and optimum condition of enzyme hydrolysis in holocellulose, and fractionate oligosaccharide with products that hydrolized partly by acetolysis and deacetylation in holocellulose. We have achieved four results. These results as follow; 1. At first. we reacted in wood meal $NaClO_2$ 1g per lignin lg for one hour and then the same of quantity $NaClO_2$ for four hours. Through these experiments, we have developed new holocellulose preparation method which had low loss of carbohydrates and high effect of the delignification. 2. The optimum condition of enzyme hydrolysis of holocellulose which had lignin was 0.005M sodium acetate buffer (pH 5.0). We have achieved 7.2% reducing sugar through the procedure that reactioned 0.01g holocellulose putting enzyme 0.03g for 72 hours. It may be supposed that 5.5% of lignin contained in holocellulose prevented enzyme contaction from holocellulose and so this lignin has resulted in the low efficiency of enzyme hydrolysis. 3. We did not fractionated from oligosaccharides which were preparated by the method of acetolysis and deacetylation in holocellulose. The reason is that holocellulose having a lot of lignin prevented prefectly partial hydrolysis from the method of acetolysis and deacetylation. 4. We attempted analysis of six standard substances through HPLC apparatus having sugar pak 1 column which we have changed flow rate and the column temperature variably. These six standard substances were D-glucose, D-mannose, D-xylose, D-galactose and L-rhamnose, L-arabinose, But sugar pak 1 column was not fitted analysis of four substances because D-galactose, D-mannose, D-xylose, L-rhamnose were agreement with elution time. And so, we could not analize four standard substances with sugar pak 1 column.

• Korean Journal of Materials Research
• /
• v.11 no.7
• /
• pp.537-544
• /
• 2001

Anatase $TiO_2$thin films as a photocatalyst were prepared by the reactive magnetron sputtering process. The $TiO_2$thin films were deposited on Si substrates under the various conditions : oxygen partial pressure, working pressure, sputtering time, and D.C. power. The photocatalystic degradation of $TiO_2$thin film have been studied to examine the contribution of surface morphology and crystallinity. The thin films with a good crystallinity or a rough surface showed a high photocatalytic degradation rate on phenol and E.coli 078 experiment. Compared with that of only UV radiation, the photocatalytic efficiency of $TiO_2$thin film under the UV radiation and the $O_2$ flow increased. We found that the crystallity and the morphology were the important factors on the photocatalytic efficiency of TiO$_2$thin film.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.06a
• /
• pp.14-14
• /
• 2001

Nitride films such as TiN, CrN etc. deposited on glass by PVD processes have been developed for many industrial applications. These nitride films deposited on glass were widely used for not only decorative and optical coatings but also wear and corrosion resistance coatings employed as dies and molds made of glass for the example of lens forming molds. However, the major problem of nitride coatings on glass by PVD process is non-uniform film owing to pin-hole and micro crack. It is estimated that nonuniform coating is influenced by a different surface energy between metal nitrides and glass due to binding states. In this work, therefore, for the evaluation of nucleation and growth mechanism of nitride films on glass TiN and CrN film were synthesized on glass with various nitrogen partial pressure by unbalanced magnetron sputtering. Prior to deposition, for the examination of relationship between surface energy and film microstructure plasma pre-treatment process was carried out with various argon to hydrogen flow rate and substrate bias voltage, duty cycle and frequency by using pulsed DC power supply. Surface energy owing to the different plasma pre-treatment was calculated by the measurement of wetting angle and surface conditions of glass were investigated by X-ray Photoelectron Spectroscopy(XPS) and Atomic Force Microscope(AFM). The microstructure change of nitride films on glass with increase of film thickness were analyzed by X-Ray Diffraction(XRD) and Scanning Electron Microscopy(SEM).

• Journal of the Korean Society of Groundwater Environment
• /
• v.1 no.1
• /
• pp.1-5
• /
• 1994

The contaminant migration through the subsurface of Nanjido landfill is studied using a 2-D finite element model of contaminant transport. The leachate mounding caused by the installation of partial slurry wall around the pheriperal area of the Landfill is analysed using the finite difference model of groundwater flow. Model parameters were validated using in-situ concentration data and the behavior of the transport next 30 years is predicted. The sensitivities of chloride concentration by the change of model parameters, e.g. leachate mounding in the Landfill and the dispersivity are analysed. The results of the analyses show that the maximum chloride concentration level near Han River caused by the leachate of Nanjido Landfill would be 1488mg/1 and comes 17 years after the landfill closure. Increase of the leachate concentration is caused by the increase of both the leachate mounding and the dispersivity. However, the rate of concentration increase becomes higher with the rise of leachate mounding level, while it tends to converge a certain concentration with the increase of the dispersivity.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.620-625
• /
• 2002

Considering the fuel consumption of car, a light structure of aluminum alloys is desired for car body nowadays. However, fusion welding of aluminum alloys has some problems of reduction of joint efficiency, porosity formation and hot cracking. ill the present work, investigation to improve the joint performance of laser welded joint has been carried out by addition of Cu, Ni, and Zr to A6N01 alloy welds. Aluminum alloy plate of 2.0mm in thickness with filler metal bar was welded by twin beam Nd:YAG laser facility (total power:5kW). The filler metals were prepared by changing the chemical compositions for adding the elements into the weld metal. Thirteen filler metal bars were prepared and pre-placed into the base metal before welding. Ar gas shielding with a flow rate of 10 l/min was used. The defocusing distance is kept at 0 mm. At travel speeds of 3 to 9 m/min and at laser power of 5kW (front beam 2kW rear beam 3kW), full penetration welds were obtained, whereas at travel speeds of 12 to 18 m/min and same power, partial penetration was observed. The joint efficiency of laser-welded joint was improved by the addition of Cu, Ni, and Zr due to the solid solution hardening, grain refining and precipitation hardening. The type of hardening has been further considered by metallurgical examination.