• 전자공학회논문지S
• /
• 제34S권9호
• /
• pp.118-125
• /
• 1997

This paper proposed a new partial resonant 3.PHI. AC-DC boost converter of high efficiency using lossless snubber. The proposed converter, DCM (Discontinuous Current Mode) has a merit of simple controlled circuit because the input current control discontinuously. But turned off switching loss and stress of the switching device increase when the switch turned off at the peak of current. Therefore, the paper improves efficiency by adopting the PRS$^{2}$(Partial Resonant Soft Switching) in 3.PHI. AC-DC boost converter and makes the unity power factor. The PRS$^{2}$ is reduced a current/voltage stresses of switching devices. Also, a DCMPRS$^{2}$M(Discontinuous Conduction Mode Partial Resonant Soft Switching Method) appear the current and voltage equation of this circuit. The paepr examine in a 3.PHI. AC-DC boost converter and show the result of that.

• 전기학회논문지
• /
• 제62권12호
• /
• pp.1694-1699
• /
• 2013

Frequency accelerated partial discharge resistance (PDR) aging of epoxy/layered silicate nanocomposite with 1.5wt % additions of layered silicate was investigated in comparison with that of epoxy without layered silicate in terms of PD(partial discharge) erosion depth. It was found that the change in the erosion depth is far smaller in specimens with layered silicate than those without layered silicate nano particles. Frequency acceleration can be done from 60Hz to 1000Hz. But the depth of erosion is less proportional to frequency. Acceleration factor is almost 2 times between 500Hz and 1000Hz, but it is much less than about 8.3 times between 60Hz and 500Hz. This superior PD resistance is caused by the presence of nanofillers, anano-effect due to closely packed nanofillers, and strong chemical bonds at layered silicate nanofillers /resin interfaces.

• 한국정밀공학회지
• /
• 제24권4호
• /
• pp.68-75
• /
• 2007

In this study, the ultimate goal is to acquire stability when turning around efficiently by using the controller which is applied partial feedback linearization of One-wheel Unicycle Robot. When moving around, linear controller could result in unstable factor according to widening operation range. So in order to reduce instability, 1 have developed Non-linear Controller using Partial Feedback Linearization. Compared with linear controller, Non-linear Controller guarantees the superiority of Regulating Control and Tracking Control in direct and also revolution motion of Robot. I'm sure of the Non-linear controller performance through many experiments.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.67-74
• /
• 1999

Self-Boring Pressuremeter Test(SBPT) is known to be the most effective in-situ test method which can reliably determine consolidation characteristics as well as deformation modules and untrained shear strength. In order to derive the coefficient of consolidation using SBPT results it is necessary to obtain the dissipation behavior from the pore pressure change with time during constant radial strain(generally 10%) and to derive the reliable time factor(Τ) from the analytical method which considers the real in-situ conditions. As previous studies on time factor are based on the assumptions of plane strain condition that the membrane of SBP is infinite, of untrained condition during the expansion of the probe and of elastic soil behavior during consolidation, these analyses can't consider the real boundary conditions and the real soil behaviour. In this study, consolidation analysis similar to real in-situ conditions including test procedure is conducted using finite element program which employs MCC model and Biot theory. Time factor considering the effects of finite membrane length, the total pressure change during consolidation and partial drainage is proposed and compared with previous results.

• 복식문화연구
• /
• 제16권3호
• /
• pp.409-424
• /
• 2008

This study intends to analyze T-shirt designs, particularly in connection with pop art. 444 pieces of T-shirts which conveyed the pop art spirits of well-known designers were selected for five years from 2001 to 2005, through fashion magazines(Collection: Dong-ah TV, Collezioni: Italy). The findings are as follows. As for formative characteristics of pop art in T-shirts, previous studies were analyzed to set classifications criteria such as popularization of images, eroticism, lettering and graffiti, assemblage. The design factor of the image popularization includes everyday images, cartoon, celebrities, and caricature. Everyday images ranked first followed by cartoon, caricature and celebrities. The design factor of eroticism ranges from the see-through look, partial exposure of human body, symbolization of underwear, and to printing of sexy images. The see-through look was ranked first, followed by partial exposure of human body, symbolization of underwear, and printing of sexy images. The design factor of lettering and graffiti encompasses letters, numbers, symbols and logos. Adoption of letters, numbers or symbols was ranked first, followed by brand logos and graffiti. The design factor of Assemblage is closely related to a three-dimensional effect. Varied expressions are possible: combination of two different textiles and fusion of textile and non-textile. Combination of two different textiles are higher than fusion of textile and non-textile.

• 한국해안·해양공학회논문집
• /
• 제32권6호
• /
• pp.458-464
• /
• 2020

유공케이슨 방파제의 한계상태설계법 개발을 위해 하중저항계수 보정을 수행하였다. 전국 항만의 12개 유공케이슨식 방파제에 대하여 설계변수의 불확실성을 고려한 신뢰성해석을 수행하였다. 목표신뢰성지수에 따른 부분 안전계수와 하중, 저항계수를 차례로 산정하였다. 최적화기법을 통해 한계상태설계법 개발을 위한 하중계수와 저항계수를 도출하였다. 최종 하중저항계수를 이용하여 방파제를 재설계하였으며 목표수준의 신뢰성지수를 상회하는지 검증하였다. 목표신뢰성지수를 변화시켜 해당 수준에 맞는 하중저항계수를 최종 제시하였다.

• 한국해안·해양공학회논문집
• /
• 제33권6호
• /
• pp.293-297
• /
• 2021

소파블록 피복제 제체의 한계상태설계법 개발을 위해 하중저항계수 보정을 수행하였다. 실제 시공된 소파블록 피복제 제체의 설계자료를 분석하여 신뢰성해석을 수행하였으며 목표신뢰성지수에 따른 부분안전계수와 하중, 저항계수를 차례로 산정하였다. 최적화기법을 통해 한계상태설계법 개발을 위한 하중계수와 저항계수를 도출하였다. 최종 하중저항계수를 이용하여 방파제를 재설계하였으며 목표수준의 신뢰성지수를 상회하는지 검증하였다. 해외기준의 하중저항계수와 본 연구에서 구한 하중저항계수를 비교하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 추계학술대회 논문집
• /
• pp.38-41
• /
• 1992

Pb(Zr,Ti)$O_3$ powders were synthesized by the partial oxalate method and the modified partial oxalate method, where the difference between the two is the use of pre-reacted (Zr,Ti)$O_2$ in the former method. When compared with conventional mixed oxide method, calcination temperature can be reduced to less than $700^{\circ}C$ by both partial oxalate methods, and the resulting particle size was finer and more uniform. Using partial oxalate-derived PZT powders, sintering temperatures can also be reduced as low as $950^{\circ}C$ without sacrificing desired dielectric and piezoelectric properties, such as relative permittivity, electromechanical coupling factor, and piezoelectric coefficient. Two partial oxalate methods yield ceramics with almost the same physical and electrical properties, so that the step of producing ZTO powder does not seem to be necessary.

• 한국해안해양공학회지
• /
• 제19권4호
• /
• pp.336-344
• /
• 2007

항만 구조물의 피복재를 설계하는 경우 경험식의 불확실성에 따른 영향뿐만 아니라 사용년수에 따른 파고분포한수를 직접적으로 고려할 수 있는 부분안전계수 산정 모형이 개발되었다. 동일한 재현기간 그리고 사용년수에서 구조물의 파괴에 대한 목표수준이 증가함에 따라 저항력과 파고에 대한 부분안전계수가 커지는 등의 특성들을 잘 재현하고 있다. 따라서 본 연구에서 산정 된 각 경험식들의 저항력 그리고 파고에 대한 부분안전계수를 이용하면 현행의 결정론적 설계법과 동일한 형태의 설계식을 사용하면서도, 확률변수들의 불확실성, 사용년수 그리고 파괴에 대한 목표수준을 고려하여 설계하는 것이 가능하다

• 대한조선학회논문집
• /
• 제46권6호
• /
• pp.569-577
• /
• 2009

As the scale factor of model propellers utilized in cavitation test is about 40, it is difficult to find out practical countermeasures against the small area erosions on the blade tip region throughout model erosion tests. In this study, a partial propeller blade model was used for the observation of cavitation pattern for the eroded propeller. A partial propeller blade model was manufactured from 0.7R to tip with expanded profile and with adjustable device of angle of attack. Reynold's number of a partial propeller blade model is 7 times larger than that of a model propeller. Also, anti-singing edge and application of countermeasures to partial propeller blade model which produced in large scale can be more practical than a model propeller. For the observation of cavitation at high Reynold's number, high speed cavitation tunnel was used. To find out the most severe erosive blade position during a revolution, cavitation observation tests were carried out at 5 blade angle positions.