• 한국해안·해양공학회논문집
• /
• 제21권4호
• /
• pp.267-277
• /
• 2009

혼성제 케이슨의 활동파괴모드에 대한 목표파괴수준에 따른 저항 및 하중 그리고 신뢰함수의 부분안 전계수를 산정하였다. 이를 위해 파력의 편이를 고려한 혼성제 케이슨의 활동파괴모드에 대한 신뢰함수를 수립하 고, 관련 확률변수의 불확실성에 대해 분석하였다. Level II AFDA 해석법을 이용하여 여러 수심조건 및 단면조건 그리고 파랑조건에 대해 신뢰성 해석을 수행하였다. 특히 대산항, 동해항 그리고 포항항의 실제 혼성제 케이슨의 활동파괴에 대한 신뢰성 해석도 수행하였다. 마지막으로 목표수준에 따른 혼성제 케이슨의 최소 소요 폭을산정하는 방법으로 본 연구에서 산정된 부분안전계수에 대한 비교 평가를 실시하였다. 비교 결과, 목표수준 1%에서는 약간의 차이를 보이고 있으나 다른 모든 수준에서는 비교적 잘 일치하고 있다.

• 대한조선학회논문집
• /
• 제32권1호
• /
• pp.25-36
• /
• 1995

확률적인 접근법으로서의 신뢰성 해석법의 소개와 이의 선체 구조 강도 평가 방법에의 적용에 관해 고찰하였다. 당사에서 건조한 유조선 및 살물선 34척을 대상으로 인장 항복강도, 보강판의 압축 최종강도, 그리고 선각 거어더의 최종강도 등 몇몇 대표적인 종강도 파괴양식에 대해 신뢰성 해석을 수행하였다. 해석결과로서 각 선박에 대한 신뢰도 지수를 보이고 종강도에 대한 신뢰성 해석시의 목표 신뢰도 지수를 제시하였다. 배길이와 건조연도에 따른 신뢰도 지수의 변화를 검토하였으며 결과로서 각 선박의 안전도가 큰 차이를 보임을 알 수 있었다. 각 선박에 대해 균일한 수준의 신뢰도를 제공하기 위하여 부분 안전계수를 이용한 새로운 강도 평가 기준을 마련하였다. AFOSM 방법 및 신뢰성 조건(RC) 방법에 따라 부분 안전계수를 계산하고 이를 비교하였으며 원하는 신뢰도를 줄 수 있는 설계식을 RC 방법으로 구하였다. 부분 안전계수로부터 구한 새로운 설계식을 사용하여 신뢰성 해석을 수행한 선박에 대해 재해석을 실시하였다. 그 결과 처음보다 많이 개선된 균일한 수준의 신뢰도를 얻을 수 있었고 이로부터 신뢰성 해석의 적용가능성과 유용성을 확인하였다.

• 한국생산제조학회지
• /
• 제22권3_1spc호
• /
• pp.518-524
• /
• 2013

Recently, probabilistic assessments of nuclear power plant components have generated interest in the nuclear industries, either for the efficient inspection and maintenance of older nuclear plants or for improving the safety and cost-effective design of newly constructed nuclear plants. In the present paper, the partial safety factor (PSF) of wall-thinned nuclear piping is evaluated based on a reliability index method, from which the effect of each statistical variable (assessment parameter) on a certain target probability is evaluated. In order to calculate the PSF of a wall-thinned pipe, a limit state function based on the load and resistance factor design (LRFD) concept is first constructed. As for the reliability assessment method, both the advanced first-order second moment (AFOSM) method and second-order reliability method (SORM) are employed to determine the PSF of each probabilistic variable. The present results can be used for developing maintenance strategies considering the priorities of input variables for structural integrity assessments of wall-thinned piping, and this PSF concept can also be applied to the optimal design of the components of newly constructed plants considering the target reliability levels.

• 한국해안해양공학회지
• /
• 제19권4호
• /
• pp.336-344
• /
• 2007

항만 구조물의 피복재를 설계하는 경우 경험식의 불확실성에 따른 영향뿐만 아니라 사용년수에 따른 파고분포한수를 직접적으로 고려할 수 있는 부분안전계수 산정 모형이 개발되었다. 동일한 재현기간 그리고 사용년수에서 구조물의 파괴에 대한 목표수준이 증가함에 따라 저항력과 파고에 대한 부분안전계수가 커지는 등의 특성들을 잘 재현하고 있다. 따라서 본 연구에서 산정 된 각 경험식들의 저항력 그리고 파고에 대한 부분안전계수를 이용하면 현행의 결정론적 설계법과 동일한 형태의 설계식을 사용하면서도, 확률변수들의 불확실성, 사용년수 그리고 파괴에 대한 목표수준을 고려하여 설계하는 것이 가능하다

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.541-543
• /
• 2000

This paper describes the unified reliability evaluation with partial loss of continuity for complex distribution system. To evaluate reliability considering line limitation of the system, PLOC technique is employed. And reliability indices calculation method is used. Finally, Analytic network process method is employed. As a result, calculating accurate reliability, finding weak points, and expansion scheduling of the system is possible.

• Ocean Systems Engineering
• /
• 제1권4호
• /
• pp.337-353
• /
• 2011

In the present study, an offshore platform having large partial porous cylindrical members, which are composed of permeable and impermeable cylinders, is suggested. In order to calculate the wave force on large partial porous cylindrical members, the fluid domain is divided into three regions: a single exterior region, N inner regions and N beneath regions, and the scattering wave in each fluid region is expressed by an Eigen-function expansion method. Applying Darcy's law to the porous boundary condition, the effect of porosity is simplified. Wave excitation forces and wave run up on the structures are presented for various wave conditions. For the idealized three-dimensional platform having large partial porous cylindrical members, the dynamic response evaluations of the platform due to wave forces are carried out through the modal analysis. In order to examine the effects of soil-structure interaction, the substructure method is also applied. The displacement and bending stress at the selective nodal points of the structure are computed using various input parameters, such as the shear-wave velocity of soil, the wave height and the wave period. Applying the Monte Carlo Simulation (MCS) method, the reliability evaluations at critical structure members, which contained uncertainties caused by dynamic forces and structural properties, are examined by the reliability index with the results obtained from MCS.

• Computers and Concrete
• /
• 제26권5호
• /
• pp.385-395
• /
• 2020

The influence of combination of nano silica and silica fume, as partial cement replacement materials, on the properties of concrete has been studied through the measurement of compressive strength. The compressive strength of concrete in terms of mean, standard deviation and with-in-test coefficient of variation related to the variation in the nominated parameters have also been developed. The compressive strength data developed experimentally has been analyzed using normal-probability distribution and partial safety factors of composite concretes have been evaluated by using first order second moment approach with Hasofer Lind's method. The use of Nano silica and silica fume in concrete decreases the partial safety factor of concrete i.e., increase the reliability of concrete. The experimental results show that the properties of concrete having nano silica and silica fume in combination were better than that of a plain concrete. The SEM test results showing the level of Ca(OH)₂ in plain concrete and consumption level Ca(OH)₂ of concrete containing nano silica & silica fume have also been presented.

• Journal of Electrical Engineering and Technology
• /
• 제7권1호
• /
• pp.103-108
• /
• 2012

The present study describes the considerations on the long-term reliability of the on-line partial discharge (PD) ceramic sensor for thermal power generators. Voltage acceleration aging tests were carried out under continuous and impulsive thermal aging at more than $100^{\circ}C$, considering the practical service environment. Experimental results show that the sensors have a life that could last for more than 100 years, excellent dielectric characteristics, and insulation strength. In addition, the ceramic on-line PD sensors were installed in a thermal power generator in Korea for demonstration. The results of the PD calibration and test voltage application prove that the on-line ceramic sensors have satisfactory performances for on-line PD measurement.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.129-136
• /
• 2005

The deterministic analysis method has generally used to evaluate the slope stability and it evaluates the slope stability with decision value that is a representative value of design variables. However, one of disadvantages in the deterministic approach is there is not able to consider the uncertainty of soil strength properties, even though it is the biggest influential parameter of the slope stability. On the other hand, the limit state design(LSD) can take a consideration of uncertainties and computes both the reliability index and the probability of failure. LSD method is capable of overcoming the disadvantages of deterministic method and evaluating the slope stability more reliably. In this study, both the mean value and standard deviation of the internal land's representative soil strength properties applied to process the LSD method. The major purpose of this study is to gauge the general applicability of the limit state design in soil slope and to weigh the comparative validity of the proposed partial safety factor. In order to reach the aim of this study, the partial safety factor and resistance factor which totally satisfied the slope's overall safety factor were calculated by the load and resistance safety factor design (LRFD).

• 한국안전학회지
• /
• 제21권5호
• /
• pp.40-45
• /
• 2006

In the operation of large capacity hydro generators, it's a very important thing that to minimize several kind of electrical trouble and accident. In order to overcome these problems, the on-line and off-line partial discharge (PD) measuring method has become an important one. Nowadays, epoxy mica coupler(EMC) has been the most widely used sensors for on-line PD detection in rotating machines. This time, we have made a ceramic coupling sensor using $SrTiO_{3}$, because at present, most of sensors has high cost and difficult procedure to making. This paper deals with the electrical characteristics of a ceramic coupling sensor, which has been made to continuously measure PD activity during the operation condition for 13kV class hydro generator. And we have performed the evaluation of sensor life and reliability based on the characteristic testing. The experimental results confirm that the sensor has satisfied at electrical required performance and output characteristic for simulated input signal.