• Journal of Surface Science and Engineering
• /
• v.47 no.5
• /
• pp.227-232
• /
• 2014

In this study, we propose the application of doping process technology for atmospheric pressure plasma. The plasma treatment means the wafer is warmed via resistance heating from current paths. These paths are induced by the surface charge density in the presence of illuminating Argon atmospheric plasmas. Furthermore, it is investigated on the high-concentration doping to a selective partial region in P type solar cell wafer. It is identified that diffusion of impurities is related to the wafer temperature. For the fixed plasma treatment time, plasma currents were set with 40, 70, 120 mA. For the processing time, IR(Infra-Red) images are analyzed via a camera dependent on the temperature of the P type wafer. Phosphorus concentrations are also analyzed through SIMS profiles from doped wafer. According to the analysis for doping process, as applied plasma currents increase, so the doping depth becomes deeper. As the junction depth is deeper, so the surface resistance is to be lowered. In addition, the surface charge density has a tendency inversely proportional to the initial phosphorus concentration. Overall, when the plasma current increases, then it becomes higher temperatures in wafer. It is shown that the diffusion of the impurity is critically dependent on the temperature of wafers.

• Korean Journal of Plant Resources
• /
• v.31 no.6
• /
• pp.641-651
• /
• 2018

Floral scents and metabolites from cut flowers of 14 peony cultivars (Paeonia lactiflora Pall.) were analyzed to discriminate different cultivars and to compare the Korean cultivar with the other cut peonies imported to Korea using electronic nose (E-nose) and Fourier transform infrared (FT-IR) spectroscopy combined with multivariate analysis, respectively. Principal component analysis (PCA) and discriminant function analysis (DFA) dendrogram of peony floral scents were not precisely same but there were 3 groups including same cultivars. PCA and partial least squares-discriminant analysis (PLS-DA) dendrograms of peony metabolites showed that different cut peony cultivars were clustered into two major groups including same cultivars. Fragrance pattern of Korean 'Taebaek' was classified to same group with 'Jubilee' on the PCA and DFA results and its metabolite pattern was clearly discriminated by the PCA and PLS-DA compared to the other cultivars. These results show that the 14 peony cut flowers could be discriminated corresponding to their chemical relationship and the metabolic profile of Korean 'Taebaek' has distinctive characteristics. Furthermore, we suggest that these results could be used as the preliminary data for breeding new cut peony cultivars and for improving the availability of Korean cut peony in cosmetic industry.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.3
• /
• pp.287-293
• /
• 1985

Degree of heterosis and gene distributions of several agronomic characters of rice were studied with F$_1$ and F$_2$ generations of 9-parent partial diallel cross in 1983-1984. Degree of heterosis was greater in F$_1$ hybrids than F$_2$ hybrids for culm length, panicle length and number of panicle and the heterobeltiosis could be observed in culm length and number of panicle from several crosses. Incomplete dominance was exhibited by culm length, panicle length and number of panicle in F$_1$ and F$_2$ generations.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.4
• /
• pp.807-823
• /
• 1995

The purpose of this study was to analyze the stress distribution and the displacement happened to the abutment, the prosthesis, and the surrounding structure according to the location of the nonrigid connector, that is, the keyway in the distal of canine and the mesial of the implant in the three unit fixed partial denture. Two-dimensional finite element model ws constructed and analyzed for the stress distribution and the displacement using software ABAQUS(Ver 5.2 Hibbitt, Karisson & Sorenson, Inc., 1992). After finishing the finite element model, the distribution load of 15kg was applied simultaneously to the all cusp tips of the prosthesis and the concentration load of 10㎏ was applied respectively at the each cusp tip of the prosthesis. The following results were obtained : 1. The amount of displacement of the implant was greater in case of the non-rigid connection than the rigid connection, and the more favorable displacement was shown in case of the IKb than the IKa. 2. Without regard to the connection method, the stress represented at the surrounding bone was similar, and the more favorabel stress distribution was shown in case of IKb. 3. The maximum stress was concentrated at the fastening screw and the neck of implant in all experimental groups, and their stress magnitudes were in the order of IKb, IR, and IKa.

• Journal of the Korean Applied Science and Technology
• /
• v.8 no.2
• /
• pp.115-122
• /
• 1991

Four novel amphoteric surfactants of N-(2-alkylamidoethyl)-N, N-dimethyl ammonioacetates were synthesized. The each reaction between four saturated fatty acids containing 10, 12, 14 and 16 carbon atoms and N, N-dimethylethylene diamine permitted to give the intermediate products, N-(2-alkylamidoethyl)-N, N-dimethylamines. Quaterinzation of these intermediates was permitted to form N-(2-alkylamidoethyl)-N, N-dimethyl, ammonioacetates, whose sturctures were identified by CC, TLC, elemental analysis, IR pectrophotometry and $^1$HNMR spectrometry. The products yielded from 48% to 58%. The isoelectric points were shown in the range of $4.30{\sim}6.64$. It showed a tendency to learn to the acidic site and its range was broadened as increase of the hydrophobic group length. Surface tensions of the aqueous solution in the $10^{-6}{\sim}10^{-1}$mol/l of amidobetaines were measured. and the critical micell concentration(cmc) were shown in the range of $8.37{\times}10^{-6}{\sim}8.96{\times}10^{-2}$mol/l, and ${\Gamma}_{cmc}$ were reduced to 32.3~38.2 dyne/cm. A linear relationship between log cmc and the number of carbon in the hydrophobic alkyl chain was presented by the formula of log cmc=2.38-0.5n, and the contribution-rate of n on the standard free energy change in micellization ${\partial}({\Delta}G^0$$_m)/{\partial}n$, was calulated as -0.5RT.

• Nutrition Research and Practice
• /
• v.7 no.1
• /
• pp.43-48
• /
• 2013

Quantities as well as distributions of adipose tissue (AT) are significantly related to cardiovascular disease (CVD) risk factors and can be altered with caloric restriction. This study investigated which cross-sectional slice location of AT is most strongly correlated with changes in CVD risk factors after caloric restriction in obese Korean women. Thirty-three obese pre-menopausal Korean women ($32.4{\pm}8.5$ yrs, BMI $27.1{\pm}2.3\;kg/m^2$) participated in a 12 weeks caloric restriction program. Subcutaneous adipose tissue (SAT) and visceral adipose tissue (VAT) were measured using computed tomography (CT) scans at the sites of L2-L3, L3-L4, and L4-L5. Fasting serum levels of glucose, insulin, triglyceride, total cholesterol (TC), low density lipoprotein cholesterol (LDL-C), high density lipoprotein cholesterol (HDL-C), leptin and homeostasis model assessment-insulin resistance (HOMA-IR) were observed. Pearson's partial correlation coefficients were used to assess the relationship between AT measurement sites and changes in CVD risk factors after calorie restriction. When calories were reduced by 350 kcal/day for 12 weeks, body weight (-2.7%), body fat mass (-8.2%), and waist circumference (-5.8%) all decreased (P < 0.05). In addition, following caloric restriction, serum levels of glucose (-4.6%), TC (-6.2%), LDL-C (-5.3%), leptin (-17.6%) and HOMA-IR (-18.2%) decreased significantly (P < 0.05) as well. Changes in VAT at the level of L3-L4 were significantly greater than those at other abdominal sites, and these changes were correlated with changes in TC (P < 0.05), LDL-C (P < 0.001), SBP (P < 0.001) and HOMA-IR (P < 0.01). These results show that VAT at L3-L4 had a stronger correlation with CVD risk factors than with other AT measurement sites after caloric restriction.

• Journal of Conservation Science
• /
• v.36 no.3
• /
• pp.213-224
• /
• 2020

This research conducted a component analysis and conservation treatment of "Sangryangmun," a material which had been written in 1965 and was discovered during the repair project for "Jinnamgwan" in Yeosu. The "Sangryangmun" has been stored in a cylindrical metal storage; however, defects, discolorations, hardening, and damages caused by pollutants were found. Based on the XRF analysis, rust in the cylindrical metal storage, which was made of Cu, was stuck on the surface of the "Sangryangmun". Using FT-IR and Pyrolysis-GC/MS analyses, carbonyl and compounds of fatty acids were detected; the organic material on the surface of the "Sangryangmun" was identified to have belonged to oil-based components. Therefore, it was presumed that the bast fibers of a mulberry was used in the paper. To determine the conservation materials, component analysis, condition survey, and preliminary test on adhesives were conducted. Moreover, the missing parts and partial linings were filled using mulberry-fiber paper, methyl cellulose, etc.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.12
• /
• pp.1207-1215
• /
• 2013

This paper proposes the location estimation techniques of distributed targets with the multi-sensor data perceived through IR sensors of the military robots in consideration of obstacles. In order to match up targets with measured azimuths, to add to the depth-first search (DFS) algorithms in free-obstacle environment, we suggest the expanded DFS (EDS) algorithm including bypass path search, partial path search, middle level ending, and the supplementation of decision metric. After matching up targets with azimuths, we estimate the coordinate of each target by obtaining the intersection point of the azimuths with the least square error (LSE) algorithm. The experimental results show the error rate of estimated location, mean number of calculating nodes, and mean distance between real coordinates and estimated coordinates of the proposed algorithms.

• Journal of Sericultural and Entomological Science
• /
• v.39 no.2
• /
• pp.186-196
• /
• 1997

The IR crystallinity index of Calcium nitrate treated silk fiber decreased proportionally to the concentration of calcium nitrate. A partial change of conformation was observed in the concentration of over 46.4-47.6% changing from $\beta$-sheet or to random coil in the crystalline region. This is in coincidence with the result of crystallinity index, which was started to be reduced in the concentration range of 46.4-47.6%. A same trend was observed for the X-ray order factor, birefringence, degree of orientation and surface structure. These structural parameters were remarkably changed on the treatment of silk fibers with concentration of 46.4-17, 6% calcium nitrate. Therefore, it seems that there exists a critical concentration of calcium nitrate in affection the structure and morphology of silk fibers. According to the examination of surface morphology, the fine stripe was observed in the direction of fiber axis at 46.4% concentration. However, the treated concentration was exceeded by 47.6%, the cracks were appeared severely on the fiber surface in the transverse direction as well as fiber axis direction. This result might be related to the tensile properties, specially a tenacity of silk fibers. As a result of quantitative analysis of a dilute acid hydrolysis, three different regions, which are known as a amorphous, semi-crystalline and crystalline region, could be obtained. The hydrolysis rate curves were different with various concentrations of treatment and the relative contents of each region could be calculated.

• Macromolecular Research
• /
• v.17 no.4
• /
• pp.271-275
• /
• 2009

This paper describes the out-of-plane order of a liquid crystalline(LC) methacrylate copolymer(3) comprised of a methacrylate(1) with a 4-styrylpyridine moiety as the photo-cyclodimerizable group and a benzoate moiety as the mesogenic group in the side chain, and another methacrylate(2) with a 4-(4-methoxyphenyl)benzoate moiety as the mesogenic group. The composition of 1 and 2 units in 3 was estimated to have a molar ratio of 54.2:45.8 by $^{1}H$ NMR spectroscopy. The X-ray diffraction study revealed that the copolymer forms a partial bilayer smectic structure. The copolymer gave rise to a high out-of-plane order parameter of about 0.74 in a wide LC temperature range of $110{\sim}160^{\circ}C$ after linearly polarized, UV light irradiation and subsequent annealing. Moreover, the external reflection IR analysis indicated that excess UV-light irradiation makes the out-of-plane LC structure of the copolymer appear in a higher and wider temperature range.