• Bulletin of the Korean Chemical Society
• /
• 제23권12호
• /
• pp.1754-1758
• /
• 2002

Tetrathiafulvalene(TTF) reacts with $PdCl_2,Pd(NO_3)_2$ and $Pd(hfacac)_2$(hexafluoroacetylacetonate) in ethanol to give $(TTF)_{1.5}PdCl_2$ (1a), $(TTF)_3Pd(NO_3)_2$ (1b) and $(TTF)_4Pd(hfacas)_2$ nd (1c), respectively. $PdCl(TCNQ)_{2.5}{\cdot}CH_3OH(2a)$was obtained from the reaction of $PdCl_2$ with LiTCNQ in methanol via the partial replacement of $Cl^-$ in $PdCl_2$ by $TCNQ^-$anion, whereas the total substitution of the labile $NO_3^-$ in $Pd(NO_3)_2$ yielded pd(TCNQ)·$CH_3OH$ (2b). $Pd(hfacac)_2(TCNQ)_2\cdot3CH_3OH$ (2c) was obtained from $Pd(hfacac)_2$ and LiTCNQ in methanol. The prepared compounds were characterized by spectroscopic (IR, UV, XPS) methods and magnetic (EPR, magnetic susceptibility) studies. The powdered electrical conductivities (${\sigma}_{rt}$) of the prepared compounds at room temperature were about~$10^{-7}S{\cdot}cm^{-1}$. The effective magnetic moments were lass than the spin-only value of one unpaired electron and no EPR signals from Pd metal ions were observed in any of the compounds, indicating that the Pd ions were diamagnetic and the magnetic moments arose from$(TTF)_n$ or $(TCNQ)_n$ moieties. The experimental evidences revealed that the charge transfer had occurred form $(TTF)_n$ moiety to the central Pd metal ion in 1a, 1b and 1c. Thus the TTF donors were ions in 2a and 2b were diamagnetic Pd(II) oxidation state. In contrast, the Pd metal ion was oxidized to Pd(IV) state in 2c as a result of an addition of $TCNQ^-$anion to $Pd(hfacac)_2$ in methanol. The oxidation states of the Pd metal ions were confirmed using the x-ray photoelectron spectroscopy.

• 한국재료학회지
• /
• 제5권6호
• /
• pp.706-714
• /
• 1995

원거리 플라즈마 화학증착법을 이용하여 저온에서 이산화규소박막을 제조하였다. 본 연구 에서는 공정변수인 기판의 온도, 반응기체의 조성 및 분압과 플라즈마 전력에 따른 산화막의 재료적인 물성을 평가하였다. XPS결과에서 산화막은 양론비(O/Si=2)보다 약간 적어 실리콘이 많이 함유된 막으로 나타났다. 이 경우 굴절율과 ESR분석에 의해 미결합된 실리콘의 양이 증가함을 알 수 있었다. SIMS분석에 의해 미량의 질소성분이 계면에 존재하는 것과 실리콘 미결함을 관찰하였다. FT-IR로부터 막내 수소량을 정량화하였으며 결합각 분포는 20$0^{\circ}C$이상에서 열산화막과 비슷한 값을 얻었다. 하지만 열산화막에 비해 높은 식각율을 보여 계면 스트레스에 의해 막내의 결합력이 약해진 것으로 생각된다.

• 한국수소및신에너지학회논문집
• /
• 제27권3호
• /
• pp.290-297
• /
• 2016

The absorbent loss due to degradation in $CO_2$ capture process using aqueous alkanol amine solution has adverse effect on the economics of overall process. The degradation causes absorbent loss, equipment corrosion, foaming, adhesive material producing and viscosity increase in operation. In this study, the degradation characteristics of $CO_2$ capture process using MEA (monoehtanolamine) under various conditions such as $O_2$ partial pressure, $CO_2$ loading and absorbent temperature. The effects of iron, which generated from the equipment corrosion, on absorbent degradation were studied using $Fe_2SO_4$ containing MEA solution. The produced gases were analyzed by FT-IR(Fourier Transform Infrared Spectrophotometer) and the specifically measured $NH_3$ concentration was used as a degradation degree of aqueous MEA solution. The experiments showed that the higher $CO_2$ loadings (${\alpha}$), $O_2$ fraction ($y_{O2}$) and reaction temperature enhanced the more degradation of aqueous MEA solution. Comparing other operation parameters, the reaction temperature most affected on the degradation. Therefore, it could be concluded that the above parameters affects on degradation should be considered for the selections of $CO_2$ absorbent and operating conditions.

• 설비공학논문집
• /
• 제20권6호
• /
• pp.381-387
• /
• 2008

The presence of non-condensable gases as an additional thermal resistance inside a refrigerating circuit has been found for a general refrigerator, The effect of non-condensable gases was varied by controlling the injection amount of dry air into the refrigerating circuit to increase a thermal resistance. Energy consumption tests for the refrigerator were conducted under the various amounts of non-condensable gases. The tested refrigerating circuit was the household refrigerator. As the molar fraction of non-condensable gases was increased from 0% to 1.46%, the amount of energy consumption was found to increase up to 25%. The increase of the amount of non-condensable gases in refrigerating circuit was found to result in increasing the condensation temperature at the condenser and decreasing the evaporation temperature at the evaporator, which were presumably caused by the low specific heat and increased partial pressure of non-condensable gas.

• Korean Chemical Engineering Research
• /
• 제57권3호
• /
• pp.425-431
• /
• 2019

As rechargeable metal-air batteries will be ideal energy storage devices in the future, an active cathode electrocatalyst is required with bi-functionality on both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) during discharge and charge, respectively. Here, a class of perovskite cathode catalyst with a micro-tubular structure has been developed by controlling bi-functionality from different Ru and Ni dopant ratios. A micro-tubular structure is achieved by the activated carbon fiber (ACF) templating method, which provides uniform size and shape. At the perovskite formula of $LaCrO_3$, the dual dopant system is successfully synthesized with a perfect incorporation into the single perovskite structure. The chemical oxidation states for each Ni and Ru also confirm the partial substitution to B-site of Cr without any changes in the major perovskite structure. From the electrochemical measurements, the micro-tubular feature reveals much more efficient catalytic activity on ORR and OER, comparing to the grain catalyst with same perovskite composition. By changing the Ru and Ni ratio, the $LaCr_{0.8}Ru_{0.1}Ni_{0.1}O_3$ micro-tubular catalyst exhibits great bi-functionality, especially on ORR, with low metal loading, which is comparable to the commercial catalyst of Pt and Ir. This advanced catalytic property on the micro-tubular structure and Ru/Ni synergy effect at the perovskite material may provide a new direction for the next-generation cathode catalyst in metal-air battery system.

• Journal of the Korean Wood Science and Technology
• /
• 제50권4호
• /
• pp.283-298
• /
• 2022

Wood has always been used for various day-to-day applications such as interior or exterior construction materials, and household products. However, it can undergo photodegradation and discoloration by environmental factors including ultraviolet (UV) light, and thus has shortened its service life. Bleaching or delignification of wood surfaces is a suitable solution to stabilize wood against weathering by UV because these techniques can alter or remove the chromophores in lignin, which is a main factor of wood discoloration. To improve the color stability of wood surface according to the lifespan, surface delignification was conducted using peracetic acid (PAA) and hydrogen peroxide (HP) on the woods of Larix kaempferi and Quercus mongolica. After the PAA treatment, L^* increased considerably from 60-70 to 90-95. Furthermore, wood surface color did not change significantly after UV exposure. The color differences (𝜟E^*) between before and after PPA treatment of wood showed the 4.8-12.2 of L. kaempferi, and 1.7-3.7 of Q. mongolica, respectively. The lignin-related peaks in Fourier transform infrared spectroscopy (FT-IR) spectra disappeared with increased duration of PAA treatment. These results confirmed that the lignin component was partially or completely removed after the PAA treatment; the color differences (𝜟E^*) clearly showed that there was a reduction in redness (a^*) and yellowness (b^*), and an increase in lightness (L^*) owing to the removal of lignin. Based on these results, this study demonstrated that the partial removal of lignin from wood surfaces is a fundamental method for resolving photo-degradation.

• Nuclear Engineering and Technology
• /
• 제56권6호
• /
• pp.2258-2265
• /
• 2024

The present investigation aims to study the role of Pr₂O₃ on the structural, physical, and radiation shielding properties of a dense cadmium lead borate glass. The XRD was used to affirm the glassy amorphous structure of fabricated sample materials. Moreover, the FTIR was used to record the change in the FT-IR spectra due to the addition of Pr₂O₃ in the wavenumber interval between 400 and 4000 cm^-1. The features of glass surfaces and the elemental analyses for the synthesized Pr₂O₃-reinforced cadmium lead borate glasses were performed using a SEM, supported by an energy-dispersive spectrometer. The γ-ray protection capacity was evaluated using the Monte Carlo method in a wide energy interval ranging between 0.015 and 15 MeV. The linear attenuation coefficient (LAC) at 1 MeV was reduced by a factor of 10 % from 0.372 cm^-1 to 0.340 cm^-1. The decrease in the LAC values negatively affected the other shielding properties such as half-value thickness and the transmission factor. Although the linear attenuation coefficient is decreased slightly with the partial substitution of CdO by Pr₂O₃ compound, the fabricated glass samples still have a high shielding capacity compared to the traditional commercial glasses as well as previous similar reported glasses.

• 전기화학회지
• /
• 제19권3호
• /
• pp.69-79
• /
• 2016

높은 에너지 밀도를 지닌 리튬 이온 전지는 현재 리튬 이온 전지에 상용화된 음극 활물질인 천연 흑연의 보다 높은 율 별 특성과 안정한 장수 명 특성을 요구하고 있다. 천연 흑연계 음극 활물질을 이용하여 리튬 전지 음극을 제작하여, SEI 피막의 형성 및 제어의 대표적인 전해질 첨가제인 VC (vinylene carbonate), VEC (vinyl ethylene carbonate), FEC (fluoroethylene carbonate)등의 다양한 첨가제를 사용하여 초기 반응에 의해 생성되는 SEI 피막을 분석하고 이에 따른 전기 화학 특성 변화를 측정하기 위하여 SEM, EVS (electorochemical voltage spectroscopy), 피막 분석, EIS (electrochemical impedance spectroscopy), FT-IR (Fourier transform infrared spectroscopy)등을 측정하여, 고온 수명 평가, 용량 유지율 및 성능 평가를 실시하여, $0^{\circ}C$ 수명특성 이후의 음극에 대한 분석을 비교 및 분석 평가 하였다. 초기 충전 시 profile에서 SEI의 형성에 의한 변화를 나타냈으며, EVS를 통하여 No-Additive가 약 0.9 V에서 SEI의 형성이 이루어지지만, VC, VEC, FEC의 경우 1 V 이상에서 형성반응이 이루어졌다. $60^{\circ}C$ 수명특성평가에서 초기 효율은 No-Additive가 가장 높게 나타나며 용량 유지율이 높게 나타났으나, cycle이 진행 될수록 충전 시 용량과 효율이 감소하여 VC, FEC보다 용량 유지율이 낮아졌고, VEC는 효율 및 용량 유지율 모두 성능이 가장 낮게 나타났다. SEM을 통하여 SEI의 변화를 확인할 수 없었지만, FT-IR을 통하여 SEI의 성분이 cycle이 진행이 될수록 첨가제에 의해 $2850-2900cm^{-1}$영역의 Alkyl carbonate ($RCO_2Li$) 계열의 성분이 더욱 견고하게 유지되는 것을 확인하였으며, EIS를 통하여 cycle이 진행될수록 저항은 증가하는 것으로 나타났고, 특히 No-Additive 및 VEC의 SEI에 의한 저항이 매우 커졌다는 것을 알 수 있었다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1527-1527
• /
• 2001

Glucose, fructose and sucrose being the main sugars that can be found in natural fruit juice. Many instrumental methods, such as GC, LC, electrochemical or spectrometric methods provide information about both the total content of sugars and the specific concentration of each carbohydrate[1]. The simplicity of sample handling and measurement in the near IR(NIR) wavelength region, which allows the use of long pathlength, optical glass cells and optical fibers, makes NIR a good alternative for sugar determination [2]. In the present study, six varieties of persian grapes were harvested at intervals through august to october and analysed for sugars by NIR. The results were processed by principal component regression (PCR) and partial least squares (PLS) analysis. Sample juice was prepared by squeezing through gauze from crashed grape. This solution was treated by zinc ferrocyanide prior to analysis in order to eliminate colored compounds and all optically active nonsugar substances. For glucose and fructose the most characteristic wavelengths were 1456nm corresponding to the first harmonic O-H stretching and the second at 2062nm corresponding to O-H stretching and deformation; secondary characteristic combination bands were also seen at 2265 nm (O-H and C-C stretching) and at 2240 nm (C-H and C-C stretching). However these spectra were taken over a wavelength range from 1100-2500nm at room temperature of 25-$30^{\circ}C$. To test the accuracy of the described procedure, samples of six varieties of grape were analysed by the proposed NIR and a standard method[2]. Good agreement were found between these two sets of the results. To perform the recovery studies , samples of grape juices previously analysed by the proposed method, were spiked with known amounts of each individual sugars and then analysed again. Relative standard deviations varied from 1.4 to 1.8% for six independent measurements of individual and total sugar concentration. In the analysis of real and synthetic samples, precise and accurate results were obtained , providing accuracy errors lower than 1.9% in all cases. Average recoveries of ${97}{\pm}{4%}$ for total sugar and between ${95}{\pm}{5%}$ and ${99}{\pm}{2%}$ for sing1e sugars demonstrate the applicability of the methodology developed to the direct analysis of grape Juice.

• Journal of Applied Biological Chemistry
• /
• 제54권1호
• /
• pp.1-6
• /
• 2011

Poly-${\gamma}$-glutamic acid (${\gamma}$-PGA)는 청국장이 발효할 때 생성되는 점질성 물질의 하나로, monomer glutamic acid의 ${\alpha}$-아미노기와 ${\gamma}$-카르복실기 사이의 amide linkage에 의해 결합된 D(-)와 L(-) glutamic acid repeat units로 이루어진 homopolymer이다. 주로 Bacillus sp.에 의해 생산된다. ${\gamma}$-PGA는 수용성, 음이온성, 무독성, 생분해성, 생체적 합성, 식용 등의 다양한 특성을 가지고 있기 때문에 여러 분야에서 응용되고 있다. 본 실험에서 ${\gamma}$-PGA를 생산하는 균주를 우리나라의 전통발효식품인 청국장으로부터 분리하였다. 분리균주의 형태 및 배양학적, 생리학적 특성, API kit 및 16S rRNA 서열을 사용하여 동정한 결과, 분리균주 GS-2는 B. subtilis와 가장 유사하여 B. subtilis GS-2로 명명하였다. 분리 정제된 ${\gamma}$-PGA의 동정은 TLC, HPLC, FTIR 그리고 $^1H$-NMR spectroscopy를 통하여 확인하였다.