• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.2
• /
• pp.166-178
• /
• 2000

As the 21st century signifies an information-oriented society, the computer integration takes place in all walks of human presence. Needs for computer and network-integrated automation present new challenges in military as well as commercial facility systems engineering. Since the first intelligent building appeared in USA in 1984, it gradually became an essential capability for the building industry requirement these days. Intelligent Building System(IBS) is evolving to be very complex because there are many subsystems such as telecommunication(TC), office automation(OA), building automation(BA), security, construction environments, etc. During the planing phase of IBS development, therefore, a disciplined systems engineering must be performed to analyze stake- holder's requirements to build an optimized system while minimizing trial-and-error expenses and risks. This paper presents a conceptual design of BAS applying systems engineering methods. The contribution of this study includes the development of IBS subsystem specification for building automation subsystem, which is a part of IBS, using the methodology of requirement analysis, functional analysis, synthesis, and verification. A computer-aided systems engineering s/w, RDD-100, was used to improve the system design efficiency and to promote the product design knowledge management for reuse in later design programs.

• Agribusiness and Information Management
• /
• v.6 no.1
• /
• pp.12-19
• /
• 2014

The purpose of this study is to compare and analyze the product image produced by the cinemagraph image and the product image produced by the general image in the electronic trade. The cinemagraph refers to the image with a special characteristic that provides the motion clue by playing the part of the picture endlessly in the form of a video. For this study, we explored how the perceived monetary value, brand attitude, and perceived taste would influence on the purchase intention, and it was analyzed that all of the three factors significantly influenced on the purchase intention. However, it was investigated that the purchase intention of the group watching the image by the cinemagraph was significantly influenced by the perceived monetary value and the perceived taste, and the purchase intention of the other group watching the general image was significantly influenced by the brand attitude and the perceived taste; therefore, it was verified that there was a difference between the group watching the cinemagraph and the group watching the general image. In this result, it could be interpreted that when the people watching the cinemagraph purchase a product in the shopping mall, the price becomes the important requirement, and when the people watching the general image purchase a product in the shopping mall, the brand becomes the important requirement; therefore, these results could provide great implications to the food marketers.

• Industrial Engineering and Management Systems
• /
• v.4 no.1
• /
• pp.23-35
• /
• 2005

This paper aims to develop a practical finite capacity MRP (FCMRP) system based on the needs of an automotive parts manufacturing company in Thailand. The approach includes a linear goal programming model to determine the optimal start time of each operation to minimize the sum of penalty points incurred by exceeding the goals of total earliness, total tardiness, and average flow-time considering the finite capacity of all work centers and precedence of operations. Important factors of the proposed FCMRP system are penalty weights and dispatching rules. Effects of these factors on the performance measures are statistically analyzed based on a real situation of an auto-part factory. Statistical results show that the dispatching rules and penalty weights have significant effects on the performance measures. The proposed FCMRP system offers a good tradeoff between conflicting performance measures and results in the best weighted average performance measures when compared to conventional forward and forward-backward finite capacity scheduling systems.

• Journal of the Korean Society of Safety
• /
• v.34 no.3
• /
• pp.50-56
• /
• 2019

Precast members have relatively good quality because they are manufactured in an environment suitable for quality control. A typical precast method in which pre-fabricated segments are assembled in the field requires a joint. Although the joint is a small part of the member, it greatly affects the behavior and quality of the structural member. In the previous study of this paper, the flexural strength of a joint, which is generally applied to half-depth precast deck systems, was verified to have higher strength than the design requirement. In addition, the proposed joint has been verified to have higher strength by reinforcing the connecting rebar. However, even if the flexural strength of the joints is sufficient, excessive deflection or lack of fatigue performance is likely to cause cracks in the half-depth precast deck system. In this study, the serviceability of the half-deck precast panel specimens with joints was evaluated and the experimental verification was conducted to evaluate the fatigue performance of the joint without connection rebar. As a result, the serviceability such as deflection and crack width was found to be higher than the design requirement in all the specimens. In the fatigue test, the fatigue effect was insignificant even in the absence of connection rebar.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.1
• /
• pp.15-21
• /
• 2023

In modern society, the delivery service market has grown explosively due to rapid changes in social structure and the recent COVID-19 pandemic. Therefore, various problems such as injury to workers and an increase in human accidents are occurring due to the loading and unloading of parcels. In order to solve this problem, domestic company n is developing a "robot-based cargo loading and unloading system". In developing a new technology system, quantitative reliability targets should be set for efficient operation and development. In this paper, reliability analysis was conducted through field data for the pneumatic gripper of the "robot-based cargo loading system". The reliability of the failure data was analyzed to estimate the distribution parameters and MTTF. Random data was derived for the probability of occurrence of a failure with the estimated value. By repeating the simulation to predict the number and year of failures according to the estimated parameters of the probability distribution, it was proposed as a method that reflects realistic probabilities rather than calculating with simple arithmetic using the average MTTF previously used in the field.

• Journal of Korean society of Dental Hygiene
• /
• v.10 no.1
• /
• pp.19-31
• /
• 2010

Objectives : This study was to seek the ways for strengthening the higher curricula for the bachelor's degree of the dental hygiene. For this two things are investigated with some students of the dental hygiene departments of colleges and workers on the part; one is what the recognition about the curricula is, and the other what are the demanding degrees through the curricula. Methods : The study has been performed with 298 people who work for dental hygiene of dental clinics and students of the departments in B region by using structured and self-administered questionnaire from March to May, 2008, and were analyzed by using SPSS 14.0 program. Results : The rate to recognize the higher curricula for the bachelor degree is 88.9%. And 70.4% among them says the curricula is 'absolutely necessary' or 'necessary'. The ways to recognize the curricula are through 'professor or friends'(53.4%), through 'newspapers of broad-casting reports'(20.5%), and through 'internet'(14.4%). They want various teaching ways including the project-centered education(40.4%), lecture-like education(25.0%), field-experience within the workplace(14.4%), lectures in the workplace(10.6%), and discussion(9.6%). Those who works in the dental clinics want night classes(49.5%, 96 respondents), internet classes(16.5%, 32 respondents), and weekend classes(14.4%, 28 respondents). They like to learn majors more deeply(30.9%), important techniques and theories about their job(26.8%), and the new skills on their work(19.8%). Conclusions : persons who are workers for dental hygiene of dental clinics and students of the departments have a requirement of dental hygienists for enforcing specialty. Therefor improve to develop education program and system about development of advance course for hygienists.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.410-415
• /
• 2001

Earned Value Management System(EVMS) has been considered as a useful tool of managing construction projects lately and its instruction into a private industry is now under consideration by the Korean government. It is on the basis of C/SCSC that had been released by the U.S. Department of Defense(DOD) since 1967. Its research has been in the active progress in order to utilize the earned value concept as a project management tool for construction project ordered by both government and private sector. Material Requirement Planning(MRP) is also known as a tool of planning and scheduling resources for assembly product as a part of inventory control models in the manufacturing industry. The purpose of this study is the effective employment of Earned Value Management to manage the construction projects by utilizing Material Requirement Planning(MRP), based on project management software and Workpackaging model.

• Industrial Engineering and Management Systems
• /
• v.4 no.1
• /
• pp.47-53
• /
• 2005

The efficiency of fabrication (fab) operation is one of the key factors in order for a semiconductor manufacturing company to stay competitive. Optimization of manpower and forecasting manpower needs in a modern fab is an essential part of the future strategic planing and a very important to the operational efficiency. As the semiconductor manufacturing technology has entered the 8-inch wafer era, the complexity of fab operation increases with the increase of wafer size. The wafer handling method has evolved from manual mode in 6-inch wafer fab to semi-automated or fully automated factory in 8-inch and 12-inch wafer fab. The distribution of manpower requirement in each specialty varied as the trend of fab operation goes for downsizing manpower with automation and outsourcing maintenance work. This paper is to study the specialty distribution of manpower from the requirement in a typical 6-inch, 8-inch to 12-inch wafer fab. The human resource planning in today’s fab operation shall consider many factors, which include the stability of technical talents. This empirical study mainly focuses on the human resource planning, the manpower distribution of specialty structure and the forecast model of internal demand/supply in current semiconductor manufacturing company. Considering the market fluctuation with the demand of varied products and the advance in process technology, the study is to design a headcount forecast model based on current manpower planning for direct labour (DL) and indirect labour (IDL) in Taiwan’s fab. The model can be used to forecast the future manpower requirement on each specialty for the strategic planning of human resource to serve the development of the industry.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1243-1250
• /
• 2007

Hotel Information Systems(HIS) has been used widely nowadays. Also, there is a requirement to connect Customer Relation Management(CRM) with the HIS. However, Hotel managers simply regard CRM as a part of HIS but, CRM is a crucial information system like MRP in factory. Therefore, It is important to set up a long term strategy for CRM in Hotel business. This study tested five hypotheses how requirement of CRM changes along increasing usage level of HIS in Hotels. Statistical test and structured test by AMOS were used to verify the five hypotheses so that I could extract HIS' characteristics. This study's results can be referred when Hotel managers make a decision how and when for CRM.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.1
• /
• pp.85-94
• /
• 2014

Tolerance accumulation has serious effect on the performance of an assembled body. This paper proposes the method which analyzes tolerance accumulation using Monte Carlo Simulation. This method can predict tolerance distribution of fully assembled body using the dimensional tolerance distribution of each part to be assembled. In this analysis, it is assumed that the tolerance of each part has the nominal distribution or uniform distribution. This analysis method is applied to ECV(External Control Valve), and the accumulated tolerance of the fully assembled ECV is obtained from the analysis. The results show that initial tolerance given to each part do not meet the design requirement of ECV. Hence, the tolerances of each part are modified and the additional analysis with the modified tolerances yields the results which satisfy the design requirements of ECV.