• 한국디지털건축인테리어학회논문집
• /
• 제11권1호
• /
• pp.23-31
• /
• 2011

In order to cope with the demands of the rapidly changing society, advanced countries enrolled in OECD have been establishing corresponding directions as integrating their fields in economy, society, and education as one system. To be a part of the international changes, Korea has presented "Mixed-Use of schools and community facilities." "Mixed-Use of schools and community facilities" enables schools to expand necessary facilities, which were not secured due to insufficient budget, through community funding. Communities could not secure enough convenient facilities because they did not have enough sites for the facilities; however, school sites have made the communities possible to have facilities. As a result, the demand for "Mixed-Use of schools and community facilities" has increased. Therefore, this study redefines the concept of the Mixed-Use of School Facilities in the perspective of the main users, researches the current state of the Mixed-Use of School Facilities through case studies in Korea, and intends to research preferences of the synthesis through surveys. In addition, the study proposes the proper size and the standard of the facilities that are possible to synthesize them with schools. In the future, in running this Mixed-Use of School Facilities business, the data from this study can be utilized.

• 소성∙가공
• /
• 제8권1호
• /
• pp.65-77
• /
• 1999

In recent years, the quality requirements from the customers of hot rolled steel strip have been steadily increasing in diversity and strictness. To meet these quality requirements as well as to improve productivity, steel mills have been doing their efforts for developing high performance Automatic Gauge Control (AGC) system. However, it is very time consuming and also needs a lot of money to develop the new technologies of AGC in actual mill. So, there has been a demand for developing the Dynamic Hot Rolling Simulator since late 80's. It is a kind of software packages and can analyze the dynamic behaviors of hot finishing rolling process without laborious experiments in actual mill. It can also be used as a designing tool of Automatic Gauge Controller. In this work, the Dynamic Hot Rolling Simulator which is applicable to 6 sands hot strip mill rolling was developed. The MATLAB with SIMLINK was used as a software developer for making the main part of simulator because it is very powerful tool for modeling, integrating, controller design, and simulation. In this paper, the structures and the mathematical models of the simulator were briefly described and the results of simulation on the transient phenomena of hot rolling process with actual mill data were also presented.

• 대한기계학회논문집
• /
• 제14권1호
• /
• pp.72-78
• /
• 1990

본 연구에서는 기존의 설계 시스템들이 갖지 못한 완전한 삼차원적 모델의 주 형을 생성할 수 있으므로 응축 시뮬레이션, NC공구 경로 생성등의 응용 프로그램과 직 접적으로 연결될 수 있는 장점을 갖고 있다. 본 논문의 1편에서는 위의 설계과정중 목형과 압탕부의 설계에 대해서 기술하고 탕구계와 주형의 설계에 대해서는 2편에서 기술하도록 한다.

• 한국정밀공학회지
• /
• 제22권9호
• /
• pp.77-84
• /
• 2005

In most vision applications, we are frequently confronted with determining the position of object continuously. Generally, intertwined processes ire needed for target tracking, composed with tracking and control process. Each of these processes can be studied independently. In case of actual implementation we must consider the interaction between them to achieve robust performance. In this paper, the robust real time visual tracking in complex background is considered. A common approach to increase robustness of a tracking system is to use known geometric models (CAD model etc.) or to attach the marker. In case an object has arbitrary shape or it is difficult to attach the marker to object, we present a method to track the target easily as we set up the color and shape for a part of object previously. Robust detection can be achieved by integrating voting-based visual cues. Kalman filter is used to estimate the motion of moving object in 3D space, and this algorithm is tested in a pan/tilt robot system. Experimental results show that fusion of cues and motion estimation in a tracking system has a robust performance.

• 한국정밀공학회지
• /
• 제21권8호
• /
• pp.73-82
• /
• 2004

In this paper, implementation of obstacle avoidance of a nonholonomic mobile robot in unstructured environment is introduced. To avoid obstacles, first, a reference collision-free path for the MR is generated off-line using HJB-based optimal path planning method. A controller is designed using integrator backstepping method for tracking the generated reference path. To implement the designed controller, a control system are needed and composed of camera system and PIC-based controller. The workspace is observed by a ceiling-mounted USB camera as part of an un-calibrated camera system. Thus the positional information of the MR is updated frequently and the MR can get the useful inputs for its tracking controller. The whole control system is realized by integrating a computer with PIC-based microprocessor using wireless communication: the image processing control module and path planning module serve as high level computer control while the device control serves as low level PIC microprocessor control. The simulation and experimental results show the effectiveness of the designed control system.

• Journal of Welding and Joining
• /
• 제23권1호
• /
• pp.41-47
• /
• 2005

Arc pressure is one of important factors in understanding physical arc phenomena. Especially it affects on the penetration, size and shape of TIG welding. Some researches were reported on the effect of arc pressure in low and middle current region. But there are not any research in high current region. The purpose of this study is to investigate the arc pressure distribution with mixing ratio of shield gas such as Ar and He gases. A Cu block with water cooling was specifically designed and used as an anode electrode in order to measure the arc pressure in high current region. Then, the arc pressure distribution was measured with change in welding current and mixing ratio of shield gases. The arc force was obtained by numerically integrating the measured results. As the results, it was shown that the arc pressure was concentrated at the central part of the arc in middle and high current regions when a pure Ar gas was used. In case of Ar + He mixing gas, the arc pressure was much lower than that of pure Ar gas. In addition, it was widely distributed to radial direction.

• 한국환경과학회지
• /
• 제1권2호
• /
• pp.15-23
• /
• 1992

Development of cumulus is studied by numerically integrating the equation of motion equations of conservation for water vapor mixing ratio, and the thermodynamic energy equuation. We use the terrain-following coordinate system called z'-coordinate system, in which we can easily treat any calculation domain with terrain configuration such as mountains. The model domain of calculation is restricted vertically to 4.Skin and horizontally to 100 km, has a bell-type mountain in the centeral part. Four cases are considered, one in a neutral environment, second in a slightly stable environment, third in a environment decreasing water content with low value of initial water vapor mixing ratio, the fourth in a case with higher vapor gradient. The more the atmosphere is unstable, the more cumulus develops easily and the more water vapors is abundant, the more cumulus develops easily too. More detailed cloud microphysics parameterizations and wet deposition must be conridered to use in air pollutants prediction model.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2012년도 춘계학술대회
• /
• pp.98-99
• /
• 2012

IMO 항해안전전문위원회에서는 2014년을 목표로 e-navigation 구현전략 계획의 개발을 단계적으로 진행하고 있다. 사용자 요구분석 단계를 거쳐 갭분석의 마무리 단계에 있으며 그 결과에 따르면, 소프트웨어 기술로 해결할 수 있는 부분이 다수 도출되었다. 갭이란 현재기술과 요구기술의 차이를 의미하고, 이를 해결하여 사용자 요구를 수용하는 과정을 거치게 된다. 기존 장비를 통합하거나 연결하는 작업은 대부분 소프트웨어 작업이며, 이는 e-navigation 개발의 주된 부분이다. 소프트웨어 기술을 적용한 결과는 매우 다양하게 나타날 수 있고, 사용하기 전까지 그 품질에 대해서 판단하기 어렵다. 본 논문은 소프트웨어 품질은 무엇이며, e-navigation분야에 소프트웨어 품질 개념 적용 방안에 대해 고찰해본다.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1256-1267
• /
• 2016

Distributed stray inductance exerts a significant influence on the turn-off voltages of power switching devices. Therefore, the design of low stray inductance bus bars has become an important part of the design of high-power converters. In this study, we first analyze the operational principle and switching transient of a T-type converter. Then, we obtain the commutation circuit, categorize the stray inductance of the circuit, and study the influence of the different types of stray inductance on the turn-off voltages of switching devices. According to the current distribution of the commutation circuit, as well as the conditions for realizing laminated bus bars, we laminate the bus bar of the converter by integrating the practical structure of a capacitor bank and a power module. As a result, the stray inductance of the bus bar is reduced, and the stray inductance in the commutation circuit of the converter is reduced to more than half. Finally, a 10 kVA experimental prototype of a T-type converter is built to verify the effectiveness of the designed laminated bus bar in restraining the turn-off voltage spike of the switching devices in the converter.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.852-858
• /
• 2007

This paper investigates the dynamic characteristics of a tilted HDD spindle system with fluid dynamic bearings (FDBs). Tilting motion of a HDD spindle system may be caused by improper manufacturing tolerance, such as imperfect cylindricity between shaft and sleeve of FDBs, imperfect perpendicularity between shaft and thrust as well as the gyroscopic moment of the unbalanced mass of the rotating part. Tilting motion may result in the instability of the HDD spindle system and it may increase the disk run-out to limit memory capacity. This research proposes a modified Reynolds equation for the coupled journal and thrust FDBs to include the variable film thickness due to the cylindricity and the perpendicularity. Finite element method is used to solve the Reynolds equation for the pressure distribution. Reaction forces and friction torque are obtained by integrating the pressure and shear stress, respectively. The dynamic behavior is determined by solving the equations of a motion of a HDD spindle system in six degrees of freedom with the Runge-Kutta method to study whirling and tilting motions. This research shows that the cylindricity and the perpendicularity increase the tilting angle and whirl radius of the rotor.