• 한국문헌정보학회지
• /
• 제41권4호
• /
• pp.113-134
• /
• 2007

본 연구는 다문화사회에 있어 대학도서관의 역할과 책임을 모색하고자 하는 목적으로 진행하였다. 조사내용은 부산대학교에 유학중인 중국학생을 대상으로 현재의 도서관 포털 서비스에 대한 이용자 만족도를 분석하는 작업이다. 이용자 만족도 평가방법은 도서관 정보서비스 품질평가 모형으로 유명한 LibQUAL+를 참조하여 구성하였으며, 평가지표는 LibQUAL+ 모형의 평가지표와 중국 청화대학교에서 사용한 서비스 만족도 평가지표를 사용하였다. 조사결과를 요약하면 다음과 같다. 전체적인 이용자 만족도는 대체적으로 낮게 나타났다. 학부생과 대학원생(석박사 과정)의 집단별로 보면, 대학원생(석박사 과정)보다 학부생의 만족도가 낮게 나타났다. 그리고 서비스의 간단 만족도 분석에서 보면 도서관 포털 서비스의 영향에 대한 만족도는 낮은 수준이며, 웹 공간 차원에 대한 만족도는 높은 수준으로 나타났다. 그리고 상대 만족도도 웹 공간 차원이 다른 차원들보다 높은 수준으로 나타났다.

• 한국해안·해양공학회논문집
• /
• 제22권1호
• /
• pp.1-9
• /
• 2010

말뚝 상부에서 수평력 대부분을 저항한다는 매커니즘을 활용하여, 횡방향 하중이 대부분인 항만 및 해양구조물에 효율적으로 적용할 수 있는 새로운 말뚝 형식을 고안하였다. 이번 연구에서는 버켓 기초식 보강기법, 팽이 기초식 보강기법, 그라우팅식 보강기법 등 3가지 형태의 보강기법을 활용한 상부 확대형 횡방향 지지 증대 말뚝에 대한 3차원 유한요소해석을 수행하였다. 이를 통해 지반의 종류를 비롯하여, 각 보강 기법의 종류, 말뚝의 종류 및 길이, 지반의 심도 등 다양한 변수가 말뚝의 횡방향 지지 거동에 미치는 영향을 검토하였다. 해석 결과, 버켓 기초를 활용한 경우 팽이기초나 그라우팅 기법 등 전반적으로 다른 보강기법을 활용한 경우에 비해 횡방향 지지력 효율이 상대적으로 가장 뛰어난 것으로 나타난다.

• Imaging Science in Dentistry
• /
• 제42권2호
• /
• pp.83-88
• /
• 2012

Purpose : The aim of this study was to investigate the initial effects of maxillary expansion therapy with Hyrax appliance and to evaluate the related changes in maxillary sinus volume. Materials and Methods : Thirty patients (20 females, 10 males; 13.8 years) requiring maxillary expansion therapy, as part of their comprehensive orthodontic treatment, were examined. Each patient had cone-beam computed tomography (CBCT) images taken before (T1) and after (T2) maxillary expansion therapy with a banded Hyrax appliance. Multiplanar slices were used to measure linear dimensions and palatal vault angle. Volumetric analysis was used to measure maxillary sinus volumes. Student t tests were used to compare the pre- and post-treatment measurements. Additionally, differences between two age groups were compared with Mann-Whitney U test. The level of significance was set at p=0.05. Results : Comparison of pre-treatment to post-treatment variables revealed significant changes in the transverse dimension related to both maxillary skeletal and dental structures and palatal vault angle, resulting in a widened palatal vault (p<0.05). Hard palate showed no significant movement in the vertical and anteroposterior planes. Nasal cavity width increased on a mean value of 0.93mm(SD=0.23, p<0.05). Maxillary sinus volume remained virtually stable. No significant age differences were observed in the sample. Conclusion : Hyrax expansion therapy did not have a significant impact on maxillary sinus volume.

• 한국전문물리치료학회지
• /
• 제27권3호
• /
• pp.212-219
• /
• 2020

Background: Although the original version of the health-related quality of life (HRQOL) questionnaires are found to be acceptable, the cross-culturally adapted versions may not be comparable to their original version. Objects: To examine dimensionality and construct validity of two Korean versions of the brief version of the World Health Organization Quality of Life (WHOQOL-BREF) and EuroQOL-5 dimension (EQ-5D) questionnaires. Methods: A total of 77 cancer survivors undergoing palliative rehabilitation programs from two rehabilitation institutes was recruited from April 16, 2018 to June 26, 2019. The WHOQOL-BREF and the EQ-5D were filled out by the various cancer survivors following a particular session of rehabilitation programs. The scores were analyzed with Winsteps Rasch analysis computer program using the rating scale model. Rasch fit statistics were used to determine the dimensionality and the item difficulty calibrations of WHOQOL-BREF and EQ-5D. Results: All items except two, negative feeling, need treatment function and pain prevent activity (mean square [MnSq] = 2.42, 1.82 and 2.51, respectively), were found to be acceptable, while two items of the EQ-5D, anxiety/depression and self-care, were misfit (infit MnSq = 1.65 and 0.38, respectively). Item difficulty calibrations of WHOQOL-BREF match person ability measures (i.e., HRQOL) fairly well. However, the person ability distribution showed obvious ceiling effects for EQ-5D. All items of EQ-5D were appeared to be less challenged in comparison with those of WHOQOL-BREF. Conclusion: Item-level analysis using the Rasch model supports the quality of culturally adapted items used to measure the HRQOL one exception; that is, whether or not to include misfit items as part of the HRQOL measurements. Additionally, cancer survivors undergoing palliative rehabilitation programs appear to have more of a tendency to view the EQ-5D items as being more challenging than the WHOQOL-BREF.

• 정보처리학회논문지D
• /
• 제10D권6호
• /
• pp.927-934
• /
• 2003

데이터베이스 질의 최적화기는 가장 효율적인 실행계획을 구하기 위해서 질의의 선택율을 추정한다. 일반적으로 애트리뷰트들은 서로 독립적이지 않기 때문에 여러 개의 애트리뷰트를 가지는 질의에 대해서는 다차원 선택을 추정 기법이 필요하다. 대부분의 상용 데이터베이스에서는 히스토그램이 계산 오버헤드가 많지 않고 작은 에러율로 데이터 분포를 를 근사 시킬 수 있기 때문에 실용적으로 많이 사용되고 있다. 그러나 여러 개의 애트리뷰트를 가진 다차원 지?l의 경우에서는 차원이 높아 질수록 에러율을 낮추기 위해 많은 저장 공간을 필요로 하기 때문에 히스토크램 방법이 적합하지 않다. 이 논문에서는 다차원 선택을 추정을 위한 새로운 기법을 제안한다. 다차원 공간에서 크기가 작은 히스토그램 버켓을 많이 만들고 이 버켓의 정보를 DCT로 압축하여 선택을 추정에 사용함으로써 에러율을 작게 하고 저장 공간의 사용량도 줄인다. 폭 넓은 실험 결과는 본 논문에서 제시한 방법들의 타당성과 이점을 확인시켜 준다.

• 한국방재학회 논문집
• /
• 제7권3호
• /
• pp.9-18
• /
• 2007

대부분의 중규모 이하 댐은 홍수에 취약한 필댐으로 대책마련이 시급한 상황이나 시설물의 중요도 및 예산형편 등을 이유로 안전의 사각지대에 놓여있다. 이러한 문제점에 대한 현실적인 대책으로 여수로 월류부만을 부분 개축할 경우 방류능력을 어느 정도 증대시킬 수 있는지 분석하였다. 월류부 개축모형은 래버린스 웨어(labyrinth weir)와 가동 웨어를 선정하였고, 소규모 댐을 임의 선정하여 수리모형실험과 Flow-3D를 이용한 3차원수치해석을 통해 월류수심별 방류량을 산정하였다. 개축모형별 개선효과를 분석하기 위하여 빈도별 확률홍수량과 가능최대홍수량(PMF)을 산정하였고, 저수지홍수추적을 실시하여 개축 전 후의 최고수위를 비교하였다.

• 한국분말재료학회지
• /
• 제11권5호
• /
• pp.412-420
• /
• 2004

The purpose of the present study is to determine an optimum composition using cheaper powders keeping with high performance of hard rock cutting diamond saw blade. With 50Fe-20(Cu . Sn)-30Co specimen, a part of Co was replaced by Ni(5%, 10%, and 15%, respectively). These specimens were hot pressed and sintered for predetermined time at various temperature. Sintering is performed by two different methods of temperature controlled method and specimen dimension controlled method. In order to determine the property of the sintered diamond saw blade, 3 point bending tester, X-ray diffractometer, and SEM were used. As the Co in the bond alloy was replaced by Ni, the hardness of the specimen increased. Thus the 50Fe-20(CuㆍSn)-15Co-15Ni specimen showed the maximum hardness of 104(HRB). The results of 3 point bending test showed that flexure strength decreased along with increase in Ni content. This is attributed to the formation of intermetallic compound(Ni$_{x}$Sn) determined by X-ray diffraction. The fracture surface after 3 point bending test showed that diamond was fractured in the specimen containing 0%, 5%, and 10%Ni, and the fracture occurred at the interface between diamond and matrix in the specimen containing 15%Ni. The cutting ability test showed that the abrasive property was not changed in the specimen containing 0%, 5%, and 10%Ni. The optimum composition determined in this study is 50Fe-20(CuㆍSn)-20Co-10Ni.

• 산업경영시스템학회지
• /
• 제40권4호
• /
• pp.10-20
• /
• 2017

The proportion of software in the automotive industry is steadily increasing due to the rapid technological development of automobile E/E parts. Because the automotive E/E technology is now on the basis of intelligent automobile and advanced safety automobile technology. The purpose of this study is to investigate the effect of organizational capability (organizational resource capability and management capability), process capability (process capability, customer Requirement management capability), performance dimension (motivation, participation level). In this study, we conducted questionnaires and statistical analysis on engineers (members of the Korea Advanced Automotive Technology Association) who perform research and development activities in the R&D organization of the automotive E/E part in South Korea. ANOVA is applied for the verification of the difference in performance measured by organizational capability, process maturity, and motivation participation level according to company characteristics (level of processing : supply chain configuration, annual sales, total SW development ratio). According to the results of this study, in order to improve the performance of ASPICE or ISO 26262-related consulting project, a different consulting approach strategy considering the characteristics of organization and personnel is needed. In summary, the analysis results for the three main treatment levels are as follows. The difference in organizational capacity, process capability and performance was found to be statistically significant according to supply chain configuration and annual sales, but it was found that the difference of response according to the proportion of total SW was not significant.

• 대한치과기공학회지
• /
• 제12권1호
• /
• pp.23-45
• /
• 1990

This study aimed at inquiring into the basic theory on co-operative education, grasping and analyzing the present situation of the junior health college, the present condition of co-operative education and into problem. and seeking to find a solution to activate the co-operative edcation of the junior health colleges. For this purpose this study compared the co-operative education system in our country with that of foreign countries revolving around the related literature to co-operative education, analyzed it, and the pointed out its problem. And this study classified into the solution of establishing co-operative education system, the solution of consolidating the on-the-spot training system, the solution to activate the co-operative education of the junior health college. First this study suggested three methods as a part of establishing co-operative education system as below. 1. The need to set up the ideology concerning co-operative education. 2. The construction of the advisory committee for co-operative education. 3. The establishment of an agency for co-operative education. And this study suggested nine methods as the method of consolidating the on-the-spot training as below. 1. The execution of the basic research for the on-the-spot training. 2. The reorganization of the existing curriculum into the curriculum the industrial organization requires. 3. The establishing of the system in a closer cooperation with the industrial organization for the on-the-spot training. 4. The participation in solving commonly the problems of the industrial organization and in education. 5. The establishing of the guidance system assuming exclusive charge of the on-the-spot training. 6. The submission of the evaluation sheet for the on-the-spot training. 7. The extension of the period of the on-the-spot training and the reorganization of an educational system. 8. The persistent support for the on-the-spot training at the governmental dimension. 9. The securing of the educational dost spent on the on-the-spot training and the imposition of benefits on the industrial organization.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.17-20
• /
• 2008

본 연구는 플랫 플레이트의 전단보강체에 관한 연구의 일부이고, 슬래브-기둥 접합부의 수직전단력 실험에서 보강체의 종류에 따라 뚫림전단강도에 대한 영향을 확인하는 것을 목표로 한다. 제안된 4개의 보강체는 s/s bar, c/s bar, wiremesh, CFS이다. 전체 5개의 실험체를 제작하고 실험을 행하였으며, 슬래브의 제원은 $2.63{\ast}2.725.0.18m$이며, 중앙에 0.6${\ast}$0.8m의 단면을 가진 기둥을 가지고 있다. 실험결과를 요약하면 CFS 전단보강체는 콘크리트와의 부착이 충분히 되지 않아서 보강체가 보강력을 발휘하기 전에 보강체와 콘크리트가 분리되어 보강효과를 발휘하지 못하였다. CFS를 제외한 3개의 전단보강체는 슬래브-기둥 접합부의 뚫림전단 저항력을 증가시켜 높은 보강효과를 나타내었다. 전단보강이 되지 않은 실험체에 비하여 강도면에서는 16${\sim}$35%의 증가율을 보였고, 변형능력면에서는 35${\sim}$63%의 증가율을 보였다.