• Journal of Navigation and Port Research
• /
• v.31 no.4
• /
• pp.317-323
• /
• 2007

As economic trade between Korea and China has been encouraged with the rapid growth of Chinese economy and port competition in Northeast Asia, Korean government is trying to promote development and consolidation of ports to cope with the lack of facilities. Thus, many projects for port development have been propelled including the enactment the 'Private investment promotion law for social overhead capital 1994.' However, there are still some unsettled issues since considerable part of risk is still allocated to the Government when it has to support the private businesses in these port investments whenever unexpected problems arise. Allocation of risk among the participants - in this case especially - is a very subtle issue, however, it was revealed that not many precedent researches were done on the subject. In my previous research, I classified and analyzed 4 principle risks i.e, construction, management, financial and social risk. This research investigates the reasonable allocation of the risks among the participants using the Hierarchial Fuzzy Process. In the result of analysis, responsibility of private party is the most important and it must put the responsibility before Government' roll concerned. Also, this research displayed and proposed the direction of management method on port development in a view of minimizing risk and maximizing initiative of a private party.

• Korea Trade Review
• /
• v.43 no.1
• /
• pp.25-45
• /
• 2018

International commercial arbitration is an inseparable part of today's international commerce. International transactions are becoming increasingly complex. Problems brought by multi-party and multi-contract arbitration pose problems for traditional arbitration systems. The Korean Commercial Arbitration Board(KCAB) has released updated International Arbitration Rules(2016 Rules) and has adopted innovations similar to those introduced in the rules of major international arbitration institutions in recent years. The changes in the 2016 Rules are intended to increase the efficiency of the arbitral process, and introduce the process for consolidation of claims. For international commerce contracts, it would be appropriate, and necessary, to adopt a multi-party arbitration clause, as consolidated arbitration provides effective resolutions for multi-party disputes.

• The Journal of Bigdata
• /
• v.4 no.2
• /
• pp.159-173
• /
• 2019

Last-Mile delivery optimization plays a key role in the urban supply chain operation, which is the most expensive and time-consuming and most complicated part of the whole delivery process. The urban consolidation center (UCC) is regarded as a significant asset for supporting customer demand in the last-mile delivery service. It is the key benefit of UCC to improve the load balance of vehicles and to reduce the total traveling distance by finding the better route with the well-organized multi-leg vehicle journey in the urban area. This paper presents the model using multiple scenario analysis integrated with mathematical optimization techniques using Geographic Information System (GIS). The model aims to find the best solution for the distribution network consisted of DC and UCC, which is applied to the case of Ulaanbaatar Mongolia. The proposed methodology integrates two sub-models, location-allocation model and vehicle routing problem. The multiple scenarios devised by selecting locations of UCC are compared considering the general performance and delivery patterns together. It has been adopted to make better decisions the quantitative metrics such as the economic value of capital cost, operating cost, and balance of using available resources. The result of this research may help the manager or public authorities who should design the distribution network for the last mile delivery service optimization using UCC within the urban area.

• The KIPS Transactions:PartD
• /
• v.16D no.4
• /
• pp.631-642
• /
• 2009

Although the Korean government is making great effort to prevent the redundancy in IT investment and efficiently allocate the IT budget, actual achievements are quite limited because of the variety of IT resources and different architecture description among organizations and projects. Thus, a standardized description model of the system architecture is strongly needed to identify the common resources and improve the efficiency of IT investment. Therefore, in this paper, we have developed the function-network matrix model which can be used as the basic template for a standard for architecture description of e-Government systems. The function-network matrix model integrates the function tiers and the network areas into a single unified framework, which enables the functionality of each component and the flow of information clearly visible. Moreover, we described the architectures of Korean e-government’s citizen service systems using our model, resulting in clear demonstration of the similarities and differences between different systems, and easy identification of the common resources. Using the architecture description model developed in this research, the consolidation of national IT resources can be promoted, and non-expert IT users can easily recognize the architecture of their systems. In addition, more efficient and systematic IT resource management can be achieved using our model.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.1
• /
• pp.111-118
• /
• 2008

In the study a 2 dimensional model test was executed to grasp the effect of the taking load of equipments on the ground when improving a soft ground like dredging reclaimed ground. The static load and the dynamic load in the consolidated model ground was $0.02kg/cm^2,\;0.03kg/cm^2\;and\;0.04kg/cm^2$ respectively. After consolidating far two months by consolidation load of $0.02kg/cm^2,\;0.03kg/cm^2\;and\;0.04kg/cm^2$ respectively, the ultimate bearing capacity was $0.16kg/cm^2,\;0.19kg/cm^2,\;0.24kg/cm^2$ respectively. And the energy price of dynamic load test at the same point as the settlement of static load test indicated $E=336{\sim}945kg{\cdot}cm,\;E=252{\sim}780kg{\cdot}cm\;and\;E=323{\sim}727kg{\cdot}cm$ for each consolidation load. When the static load and the dynamic load operated at the same ground condition, the heaving quantity was bigger in the case of the dynamic load than in the case of the static load, and the horizontal displacement quantity the in the case of dynamic load was exhibited very deficiently compared to the quantity in the case of static load test.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.9
• /
• pp.55-60
• /
• 2010

This study are carried out to an lab model tests to develop a construction method that solidifies high-water content cohesive soil by using filter type drain and vacuum pressure, and that stabilizes the ground by accelerating horizontal drain at incline or in tunnel. The calibration chamber was designed within length of 1.5m and height of 50cm, and a drainage hole for preconsolidation, a switchgear and a piezometer were installed at the bottom part of the chamber. Also, a settlement gage was installed at the top part so that it can measure the settlement by time. The calibration ground basis was made in a form of thin layer from kaolinite and bentonite in 9:1 ratio stirred at 130% water content condition. A filter type drain was installed at chamber center and a vacuum pressure of 0.8MPa was applied through a hose linked to the cap at the top part, then, the settlement was measured in every 1 hour interval. After experiment, the moisture contents were measured by position, then, verified the increase of solidity of the ground through a triaxial compression test on undisturbed profile. After 11 days from the effective date, it was observed that the settlement decreased by maximum 35mm and the water content ratio was reduced by 38% at most while the solidity of the ground increased by 5~8 times greater than before preconsolidation.

• Journal of the Korean Society for Heat Treatment
• /
• v.31 no.3
• /
• pp.126-134
• /
• 2018

In this research, we produced polycrystalline n-type $Bi_2Te_{2.7}Se_{0.3}$ powder using water atomization. To obtain full benefit through water atomized powder, we have implemented spark plasma sintering and hot extrusion for powder compaction. The microstructure and thermoelectric properties were investigated and compared. The average grain size of SPS and extruded bulks were 3.08 and $3.86{\mu}m$ respectively. The extruded material microstructure contains layered grains with less grain boundaries and its counter-part SPS displays dense packed grains with high grain boundaries. Among both bulks, extrusion sample exhibited high power factor (PF) of $2.96{\times}10^{-3}Wm^{-1}K^{-2}$ which is 38% higher than SPS ($2.14{\times}10^{-3}$) bulk sample. Due to variations in grain size and grain boundaries, the SPS bulk shows low thermal conductivity than extruded bulk. However, the extruded bulk sample exhibited a peak ZT of 0.69 at 400 K, which is 19% higher than SPS bulk sample, due to its higher power factor.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.54-71
• /
• 1990

The fabrication of ceramic machine components by injection molding(CIM : Ceramic Injection Molding) is critically dependent on the shaping and binder extraction techniques. Injection molding is of keen interest to ceramic industries because CIM is suitable for making an intricate shape and manufacturing cost is lower than other process when production scale is large. The success of the molding process is dependent on the correct formulation of the organic vehicle and the achievement of optimum filler loading. Fine alumina powders and polyethylene binder systems were employed to prepare moldable blend then produce a simple specimen by compression molding. Flow characteristics of the mixture was evaluated by viscosity measurement. Optimum binder system and ceramic volume loading for injection molding were determind. A good debinding technique was utilized to improve the quality of debinded parts and save the debinding time. The simple ceramic part was successfully sintered after debinding and its microstructure examined with SEM revealed good consolidation.

• The KIPS Transactions:PartD
• /
• v.9D no.5
• /
• pp.769-778
• /
• 2002

The LEX system is a XML-based framework for medical information consolidation. The Lex makes it possible for heterogeneous HISs(Hospital Information Systems) exchange and share HL7 messages by storing the messages into a single Central Clinical Database. In this paper, we propose a HL7 message server independently interoperable from existing HIS to generate HL7 messages, and design an XML database schema suitable for storing and manipulating such data. We also propose a new DTD for efficient transformation of HL7 messages to XML documents for storage saving as well as supporting patient-oriented information retrieval.

• The Journal of the Korea Contents Association
• /
• v.10 no.7
• /
• pp.449-458
• /
• 2010

The e-Learning quality assurance is a part of responsibility for education in latest information age, and should be understood as a basic direction for qualitative enhancement rather than quantifiable expansion. In such a context, this study sought to survey latest trends of e-Learning quality assurance activities deployed around overseas countries, so that it could give possible implications on how to plan and perform e-Learning quality assurance in Korea. So, this study focused on surveying actual conditions, coverage, target and useful indices of e-Learning quality assurance activities deployed by 9 institutions across 5 countries, and characterizing those activities across 5 countries. As a result, this study could find out its implications such as acquisition of various resources available for e-Learning, nationwide consolidation of e-Learning quality assurance activities, development of specialists in e-Learning quality assurance, and choice and focus for e-Learning quality assurance system. In other words, it was found that e-Learning quality assurance should be approached from nationwide standpoint in the interest of better educational quality, rather than from viewpoint of task.