• Horticultural Science & Technology
• /
• v.32 no.3
• /
• pp.353-358
• /
• 2014

Hot water dipping test was conducted for chicon to restrict red discoloration of its basal part which impairs the product value during sales. Hot water dipping treatment was given to chicon for 4 min and for 8 min at $38^{\circ}C$ and for 2 min and 4 min at $42^{\circ}C$, and for 1 min and 2 min at $45^{\circ}C$, along with control (for one min at $20^{\circ}C$). The red discoloration indices of basal part of chicon during sensory evaluation on the sixth day of storage under the storage temperature at $10^{\circ}C$ was lower at $42^{\circ}C$ for 2 min, $42^{\circ}C$ for 4 min and $45^{\circ}C$ for 1 min treatments. The color change value of the basal part in chicon measured by colorimeter showed that the lowest ${\Delta}a^*$ and ${\Delta}h$ were maintained in the basal part of chicon treated at $42^{\circ}C$ for 2 min. Whereas, color changes in $42^{\circ}C$ for 2 min and $45^{\circ}C$ for 1 min treatments were significantly low as compared with that of control. The contents of total phenolic compounds which are the substances that cause red discoloration of basal part in chicon were lowest at $42^{\circ}C$ for 2 min, $42^{\circ}C$ for 4 min and $45^{\circ}C$ for 1 min treatments. The activity of phenylalanine ammonia lyase (PAL) resposible for in the synthesis of phenolic substances was the least in $42^{\circ}C$ for 2 min treatment. Whereas, PAL activity of the chicons treated a t $42^{\circ}C$ for 2 min and at $45^{\circ}C$ for 1 min were significantly lower than that of control. However, red discoloration was progressed as similar level with that of control in the basal part of chicon at $45^{\circ}C$ for 2 min. The contents of total phenolic compounds and PAL activity in this treatment were not significantly different from those in control. The polyphenol oxidase (PPO) activity which causes red discoloration of cut tissues was low in all the treatments including $42^{\circ}C$ and $45^{\circ}C$ treatment at which no inhibition effects of the red discoloration of basal part of chicon were observed. When the correlation coefficient between each investigated index was tested, most of them showed high correlation except the PPO activity and particularly and the red discoloration index and sensory evaluation ${\Delta}h$ values, and PAL activity and total phenolic compounds content were $r=0.927^{**}$, and $r=0.942^{**}$, respectively.

• Journal of Aerospace System Engineering
• /
• v.7 no.2
• /
• pp.42-46
• /
• 2013

In 2010, Airworthiness standard for VLA(Very Light Airplane) category was newly introduced as KAS Part VLA. KAS Part VLA is an adaption of EASA CS-VLA which was developed to reduce unnecessary burden of manufacturer of very light, simple, single-reciprocating-engine/propeller powered airplanes having low stall speeds by tailoring some requirements of Part 23. In this paper, difference and similarity of structural requirements between Part 23 and VLA was analyzed.

• The Microorganisms and Industry
• /
• v.19 no.2
• /
• pp.42-44
• /
• 1993

학회는 두 part로 구분되어 발표되었고, 그중 한 part를 들으며 중국측의 의도가 학술적 발표라기보다는 상업적 내용이 다분히 포함되었다고 생각되었습니다. 그러나 그들의 발표는 상당한 긍지와 적극성을 보였으며, 특히 한 연구과제를 십년이상 계속하여 Yield가 높아진 사실을 강조할 때 새로운 면모를 느끼게 하였습니다.

• 건축구조
• /
• v.22 no.3
• /
• pp.31-42
• /
• 2015

• Journal of Korean Society for Quality Management
• /
• v.42 no.3
• /
• pp.301-310
• /
• 2014

Purpose: The purpose of this study is to improve a mechanism of expendable bathythermograph measurement by balancing wire resistances between plus wire part and minus wire part and by removing effects of sea water resistance between XBT(Expendable Bathythermograph) and temperature recorder. Methods: The problems are exactly found out through the analysis of XBT and temperature recorder circuit. A process of XBT manufacturing that balances wire resistances between plus wire part and minus wire part is added. Results: The results of this study are as follows; the complicated test process such as temperature accuracy test with a cistern is substituted with a simple process of XBT manufacturing such as balancing wire resistances between plus wire part and minus wire part. Then, the temperature accuracy tolerance of XBT is improved up to ${\pm}0.1^{\circ}C$. Conclusion: Consequently, balancing wire resistances and removing effects of sea water resistance improve temperature accuracy of XBT and reduce expensive and harassing process of XBT manufacturing.

• The Journal of Society for e-Business Studies
• /
• v.6 no.2
• /
• pp.127-142
• /
• 2001

For the B2B e-commerce and SCM (Supply Chain Management), standardization of electronic catalogue that contains product and business data is important. Especially, standardization of hierarchies that is required for categorization, and standardization of product properties are difficult and costly to maintain. The ability of searching for items and data in databases is critical for successful e-commerce system. This paper introduces the data dictionary of PUB (ISO 13584) part 42 which can establish the standard of product data. The method is applied to develop the data dictionary of automotive parts.

• Proceedings of the CALSEC Conference
• /
• 2001.08a
• /
• pp.289-304
• /
• 2001

◆ 자동차 부품 데이터사전의 작성 ㆍ PLIB Part42의 방법론 적용 ㆍ ESPRIT PLUS Project 방법론의 적용 ㆍ 자동차 부품 데이터사전의 제시 ㆍ 전자상거래를 위한 정보 표준화 방향을 제시 ◆ 데이터사전 방법론의 유용성 확인 ㆍ 검색, 확장, 수정의 유용성 확인

• Honam Mathematical Journal
• /
• v.42 no.4
• /
• pp.821-828
• /
• 2020

In this work, we prove an existence of an inertial manifold for a system of differential equations with a non-self adjoint leading part. The result follows from the existence and uniqueness of negatively bounded solutions. In fact, we show that a sharp spectral condition is sufficient for the proof.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2005.05a
• /
• pp.42-45
• /
• 2005

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.1
• /
• pp.139-146
• /
• 2000

This paper presents a prototype for structural analysis and design system by use of the STEP concepts for the representation and exchange of information on framed steel structures, and also integrates the product model of steel structures of AP 230, geometric and topological information of Part 42, and detailed Finite Element Analysis information of Part 104 into an unified system. Thus, the STEP-based system makes engineering information more clearable and exchangeable between computer applications than any other conventional methods. This system may be further extended to incorporate other computer applications for detailed engineering and manufacturing information on steel structures.