• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.3
• /
• pp.74-81
• /
• 2004

In this study preliminary structural design has been performed to develop an all composite wing box for experimental aircraft(classified in FAR Part 21). Considerations on composite materials and their manufacturing process were taken into account throughout the design phase. Aerodynamic loads were estimated by using Shrenk method(NACA TM No 948) and FAR Part 23 Appendix A. The structural layout has been determined to carry effectively the critical loads and to maximize the benefit of composite structure. Maximum strain failure allowable and first ply failure criteria were applied for the sizing of major structural members. Finally, the designed composite wing box structure is presented in the form of drawings, which include material specifications, stacking sequences and joint design.

• Transactions of Materials Processing
• /
• v.23 no.4
• /
• pp.238-243
• /
• 2014

Recently, magnesium alloys have been widely used in the automotive, aerospace and electronics industries with the advantages of high specific strength, excellent machinability, high electrical conductivity, and high thermal conductivity. Deep drawn magnesium alloys not only meet the demands environmentally and the need for lighter products, but also can lead to remarkably improved productivity and more rapid qualification of the product The current study reports on a failure prediction procedure using finite element modeling (FEM) and a ductile fracture criterion and applies this procedure to the design of a deep drawing process. Critical damage values were determined from a series of uniaxial tensile tests and FEM simulations. They were then expressed as a function of strain rate and temperature. Based on the plastic deformation histories obtained from the FEM analyses of the warm drawing process and the critical damage value curves, the initiation time and location of fracture were predicted. The proposed method was applied to the process design for fabrication of a Mg automotive compressor case and verified with experimental results. The final results indicate that a Mg case part 39% lighter than an Al die casting part can be produced without any defects.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.2
• /
• pp.62-69
• /
• 2009

For the fault diagnosis of power transformer, we develop a diagnosis algorithm based on support vector machine. The proposed fault diagnosis system consists of data acquisition, fault/normal diagnosis, and identification of fault. In data acquisition part, concentrated gases are extracted from transformer for data gas analysis. In fault/normal diagnosis part, KEPCO based decision rule is performed to separate normal state from fault types. The determination of fault type is executed by multi-class SVM in identification part. As the simulation results to verify the effectiveness, the proposed method showed more improved classification results than conventional methods.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.5
• /
• pp.512-518
• /
• 2014

In this paper, the influence of part shape complexity and die type on forming accuracy in incremental sheet metal forming is presented. The part shape complexities are classified into two types, namely, of one and two-step shapes. Correspondingly, die types are classified into three types, namely, of no-, partial, and full die types. The experimental tests are performed separately on negative and positive forming methods. It is shown that for the one-step shape, there are no significant differences in forming errors between the cases of no- and full die types when the negative forming method is used. Furthermore, the full die type is better than the partial die when positive forming is used. For the two-step shape case, the full die type always exhibits better forming accuracy than the no- and partial die types, irrespective of the forming method used.

• Journal of Welding and Joining
• /
• v.34 no.4
• /
• pp.23-27
• /
• 2016

A 3D printed metal part and thermal plastic polymer part were joined by direct laser irradiation. The 3D metal part was fabricated by using DED(Direct Energy Deposition) with STS316 material. The experiment was carried out through no patterned metal surface, 3D metal printed surface and micro laser patterned surface. The most secure joining quality was obtained at the laser micro patterned surface specimen and the counterparts of polymers were PLA and PE based thermo plastics. The applied laser power was 350Watt and the distance of patterns was maintained at $150{\mu}m$. The laser line width was optimized at $450{\mu}m$ and the laser micro pattern depth was $180{\mu}m$ for the best joining quality. Based on the result analysis, the possibility of laser material joining for metal to polymer was proposed and multi-material joining will be possible in 3D laser direct material fabrication.

• Journal of The Geomorphological Association of Korea
• /
• v.23 no.1
• /
• pp.47-60
• /
• 2016

In this study, datum points measurement have been collected and then weather data have been analyzed to figure out erosion and deposition environmental change around Halmi-island, Baramarae. First of all, it was difficult to analyze geomorphological change which is caused by climate change because of quite short term of collection period of data. However, differences in spatial distribution of erosion and deposition have locally been shown. In all season, the wind is blowing in north and north-west direction mostly except in summer which is shifted to south direction. However, since its ratio which are above 5m/s is much lower than the north and north-west wind, its effect on geomorphological process is very tiny. In order to look at a tendency of erosion and deposition environmental change around Baramarae Halmi-island, the periphery of Halmi-island was classified to east and west part, then accumulated erosion and deposition values have been calculated. As a result, generally, the datum points are located in the west part which are mostly depositional sites. On the other hand, the datum points are located in east part showed the dominant erosion patterns.

• Journal of The Korean Association of Information Education
• /
• v.23 no.1
• /
• pp.29-38
• /
• 2019

The purpose of this study was threefold: to design and develop a smart teaching and learning system based on flipped learning for elementary subject matter education; to apply the system to the elementary classroom; and to examine the effects of the system on students' achievement and satisfaction levels. The system was composed of a video part, a date part, and a learning line part. Presentations, preinstructional videos, and spreadsheets were created for the flipped classroom. The results of the analyses indicated that the teaching and learning system positively influenced students' achievement and satisfaction levels. The study concluded with the implications of the study and suggestions for the future study.

• Herbal Formula Science
• /
• v.9 no.1
• /
• pp.35-82
• /
• 2001

In the Encyclopedia Medica Koreana(Dongeuibogam), I have researched 245 prescriptions in which Panax Ginseng plays an important role. And I have got the following results. The healing scope and frequency of ginseng-mainly-included prescriptions are Child Part 29(11.83%), Violent Cough Part 23(9.38%), Sick-by-Cold Part 21(8.57%), Oncosis Part 16(6.53%), Overwork Part 14(5.71%), Gynecologic Part 14(5.71%), Internal Part 13(5.3%), Apoplexy Part 11(4.48%), Mind Part 10(4.08%) and Fecal Part 10(4.08%) prescriptions. And also each of Nausea Part, Anger Part, and Spirit parts has the same 5 (2.04%) prescriptions. And each of Qi Part, Diabetes Meatus Part, Malaria Part, and Humoral Part has 4(1.63%) prescriptions. And each of Foot Part, Choleraic Part, Genital Part, Blood Part, and Voice Part has 3 (1.2%). All of these prescriptions cover 88.88%. And besides listed parts above, Panax Ginseng is all used in 48 Parts: Body-Mind Part. Mouth-Tongue Part, Breast Part, Muscle Part, Swelling Part, Urine Part, Epidermis Part, Heat Part, Anus Part, Stomach Part, Eye Part, Laryngopharynx Part. Uterus Part" Heavy Stomach Part, Head Part, Pulse Part, Hair Part, Navel Part, Emetic Part, Costal Part, Edema Part, Vomiting Part, Superstitious Part, and Cardiac Part, etc. Of the prescriptions in which Panax Ginseng plays an important role, the most representative diseases, which more than 86.8% prescriptions cure, are shock, numbness from cold, Taeeum disease, oncosis, overwork, sick from eating, numbness of extremities, diarrhea, tachycardia, forgetfulness, nausea, heat from kidney, nocturnal emission, short breath, diabetes meatus, malaria, sweating, sweating overnight, beriberi, cholera, insomnia from enervation, sialitis, navel pain, hemorrhage, and loss of voice. The pathology of the prescriptions in which Panax Ginseng plays an important role is divided into the organ problems, six natural factors, seven extreme feelings, unbalanced humoral status, overwork, and, unbalance of qi and blood. Spleen, heart, and uterus is the main cause of organ problems; wind and cold are the main cause of six natural factors; heavy humors are the main cause of unbalanced humoral status; the stasis of seven feelings are the main cause of seven extreme feelings; the lack of stamina and overwork are the main cause of the overwork; the lack of qi, the lack of blood, and, the lack of qi and blood are the main cause of the unbalance of qi and blood. After I have researched the contents of the prescriptions in which Panax Ginseng plays an important role, I could understand the addition of the different prescriptions, combination of medicines, and the role of medicine groups associated with Panax Ginseng. So from now on, the results I have got could be used as the data which show the theoretical basis on the prescriptions.

• Journal of architectural history
• /
• v.23 no.4
• /
• pp.81-90
• /
• 2014

This paper aimed to identify the variation of layout in Hwangnyoungsa buddhist temple site based on studying published the excavation research paper and texts related to layout. According to earlier studies, in 1st construction period(553~569) of Hwangnyoungsa, there were trisection spaces with one main hall and two corridors in inner part and then in 2nd period(584~645), unified one. But actually trisection spaces had been maintained until the middle part of 8th century. And in each space there was the main hall with large yard. That is the 2nd period layout of Hwangnyoungsa. For the attainment this result, each building remains are judged under duplicated situation which one was the previous and next by consideration of the construction condition and special features of foundation. Although the meaning of trisection system of Hwangnyoungsa is similar with the layout of ancient palace, it could be said to derive from accumulation excavation research in Silla's archeological site and such studies.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.3
• /
• pp.364-372
• /
• 2007

The ozone concentration is one of the important environmental issue for measurement of the atmospheric condition of the country. In this article, two time series ARE models, the direct ARE model and applied ARE model have been considered for analyzing the ozone data at southern part of the Gyeonggi-Do, Pyeongtaek, Osan and Suwon monitoring sites in Korea. The result shows that the direct ARE model is better suited for describing the ozone concentration in all three sites. In both of the ARE models, eight meteorological variables and four pollution variables are used as the explanatory variables. Also the high level of ozone data (over 80 ppb) have been analyzed at the Pyeongtaek, Osan and Suwon monitoring sites.