• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.10
• /
• pp.1188-1195
• /
• 2012

The trend for the development of radar is the active phased-array radar system. The trade-off between the processing speed and the number of the signal process board for the real time signal processing has to be optimized particularly in multichannel radar system. This paper introduces a transmission technique in order to transmit a large amount of received data from an Antenna Part to Signal Process Part. As a result, the number of the S/L board(COTS board) is reduced to one half, and the margin of the data transmission rate is about 2 times higher than the original method.

• Economic and Environmental Geology
• /
• v.37 no.2
• /
• pp.173-184
• /
• 2004

The geochemical exploration was carried out of the soil systems in the survey areas(Mt. Subang area). The chemical values of soil samples for soil in this area are defined such as over values of Ag : 11 ppm(Average ： 1.91 ppm), Au 548 ppb(Average 42.39 ppb), Cu : 89 ppm(Average：51.40 ppm), Pb：190 ppm(Average ： 23.69 ppm), Zn : 157 ppm(Average : 61.78 ppm), respectively. Anomalous areas for each element have been chosen based on the factors such as, geologic settings, geochemical survey, chemical analysis of ore, chemical analysis of soil. statistical processing of the chemical analysis. Therefore, multi-elements anomalies area were recognized in the east-center part of the study area.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.6
• /
• pp.930-940
• /
• 2019

This study analyzes the facial data required for sheet design in order to pursue the facial compatibility of disposable sheets used in facial mask products that are increasing in popularity as self-care methods. The subjects of the study were 23 facial measurements of 1,001 women in their 20s to 60s from Size Korea's 6th 3D data. Through factor analysis, sheet-related facial measurements were collected into six factors included in the vertical length of each part of the face: length of face surface from the ear to each part of the face, width of eyes, nose, lips, length of nose, vertical length of lower face, width of the head and width of chin. Three sheet face types were classified using six factor scores as variables, and the characteristics of each type differed according to age group. As a result of the discriminant analysis to identify the dimension items that classify the three cluster types, 12 contributing items were extracted out of 23 items. This study provides useful information and data for further studies of products requiring facial fitness.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.4
• /
• pp.420-427
• /
• 2015

This paper statistically reviewed for the USNCAP frontal crash test results carried out by NHTSA. Vehicle samples were selected on total 20 vehicles which were included on 15 vehicles for MPV&SUV and 5 Pickup. The results was summarized as followings. The performance for the driver was better than the passenger's in the average sense. There exist distinctions between the driver and the passenger on the USNCAP front test procedure, for example dummy size, seating position and airbag style. Therefore these differences originated in the statistical results. Main effect was Neck injury for crash performance on both dummies on the average value. Root cause of neck injury was different for each dummy, ie, the driver caused from Nte & Ntf, but the passenger did absolutely Nte mode. Reliability evaluated from the standard deviation was highly dependent upon chest injury on the driver and neck injury on the passenger. Restraint system was also summarized.

• Journal of Animal Environmental Science
• /
• v.5 no.1
• /
• pp.17-22
• /
• 1999

This experiment was conducted to determine the influence of litter type on growing performance of broiler and litter characteristics. Sawdust, wood chips and solid part of cattle manure was used as a litter from 7 to 42 days of broiler age. The body weight was significantly (p<.05) higher in manure solid than those of sawdust and wood chips. The litter production was 2,134, 2,246 and 1,785g per bird on the sawdust, the wood chip and the manure solid during 35 days, respectively. Although the initial moisture contents of the litter materials were different 23.5% for sawdust, 16.26% for wood chips and 61.57% for cattle manure solids, the moisture were different 23.5% for sawdust, 16.26% for wood chips and 61.57% for cattle manure solid, the moisture contents became similar after 28 days of the experimental period. The nitrogen content of manure solid was higher than those of sawdust and wood chips. It was concluded that solid part of cattle manure and wood chips were potentially useful source of litter materials for broiler.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.4
• /
• pp.337-358
• /
• 2007

Purpose This study was performed to evaluate the stability of dual thread implant using resonance frequency analysis in human. Materials and methods Fifty-five patients(32 males and 23 females) with a mean age of 50 years and 1 month who were treated during March, 2005 to July, 2007 in Pusan National University hospital. Totally 145 dual thread Implants were installed and initial stability was measured by Osstell $Mentor^{TM}$. After 3-6 Months, secondary stability was measured at the time of second surgery or before prosthetic treatment. Results At the time of 1st surgery, average ISQ value was $75.12{\pm}12.06$. Only 1 implant was failed during the healing period. Before prosthetic treatment, ISQ values were measured and its mean value was $80.94{\pm}6.12$. Conclusion These results suggest that the increased stability of the implant verifies the clinical relevance of double thread implant.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1998.04a
• /
• pp.264-269
• /
• 1998

본 연구에서는 겨울철 대류 난방시 발생하기 쉬운 실내 기온의 상하분포가 인체에 미치는 영향에 관하여 청년층의 피험자를 대상으로 한 체감실험을 수행하여 인체의 생리 및 심리반응에 미치는 영향을 검토하였다. 체감 실험 결과 아래와 같은 결론을 얻었다. 1) 머리부위 공기온도가 23$^{\circ}C$ 인 경우 두한족열의 경우가 두열족한의 경우에 비하여 전신온냉감 및 쾌불쾌감이 양호한 것으로 나타났다. 2)두열족한의 경우 발 부위가 서늘하다는 비율은 상하온도차가 증가($\Delta$t 3$^{\circ}C$ ->6$^{\circ}C$)하면 역시 증가하였고, 두한족열의 경우 머리 부위 온도 23$^{\circ}C$에서는 발부위온도를 증가시키면($\Delta$t 3$^{\circ}C$->6$^{\circ}C$)불쾌 비율이 증가하는 경향을 나타냈다. 3) 신체 부위별 온열감과의 관계를 보면 어깨부위에서 느끼는 온열감이 전반적으로 쾌불쾌감 및 전신온냉감과 유의차를 나타냈다. 얼굴 부위에서의 온열감은 머리부위 공기온도 $25^{\circ}C$이상에서 쾌불쾌감과 유의차를 나타냈고, 발 부위에서의 온열감은 머리부위 공기온도 $25^{\circ}C$ 이하에서 전신온냉감과 유의차를 나타냈다.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.6
• /
• pp.872-879
• /
• 2002

One of the improtant characteristics of core-shell type nanoparticles is the long-term storage and reuse as an aqueous injection solution when required. For this reason, reconstruction of lyophilized core-shell type nanoparticles is considered to be essential . BAB type triblock copolymers differ from AB type diblock copolymers, which contain the A block as a hydrophilic part and the B block as a hydrophobic part. by not being easily redistributed into phosphate-buffered saline (PBS, pH 7.4, 0.1 M). Therefore, lyophilized core-shell type nanoparticles of CEC triblock copolymer were reconstituted using a somication process with a bar-type sonicator in combination with a freezing-thawing process. Soncation for 30s only resuspended CEC nanoparticles in PBS; their particle size distribution showed a monomodal pattern with narrow size distribution. The bimodal size distribution pattern and the aggregates were reduced by further sonication for 120 s but these nanoparticles showed a wide size distribution. The initial burst of drug release was increased by reconstitution process. The reconstitution of CEC core-shell type nanoparticles by freezing-thawing resulted in trimodal distribution pattern and formed aggregates, although freezing-thawing process was easier than sonication . Drug release form CEC nanoparticles prepared by freezing-thawing was slower than from the original dialysis solution. Although core-shell typenanoparticles of CEC triblock copolymers were not easily performed. Cytotoxicity testing of core-shell type nanoparticles of CEC-2 triblock copolymers containing clonazepam (CNZ) was performed using L929 cells. Cytotoxicity of CNZ was decreased by incorporation into nanoparticles.

• Journal of Powder Materials
• /
• v.12 no.1
• /
• pp.36-42
• /
• 2005

Four different mechanical alloying(MA) processes were employed to fabricate very fine intermetallic compound $Al_3Zr$ particles dispersed Al composite materials(MMC) with Al-4at.%Zr composition. Phase transformations including phase stability during MA and heat treatment processes were investigated. Part of Zr atoms were dissolved into Al matrix and part of them reacted with hydrogen produced by decomposition of PCA(methanol) to form hydride $ZrH_2$ during first MA process. These $ZrH_2$ hydrides disappeared when alloy powders were heat treated at $500^{\circC}$. Stable $Al_3Zr$ dispersoids with $DO_23$ structure were formed by heat treating the mechanically alloyed powders at $400^{\circC}$. On the other hand, metastable $Al_3Zr$dispersoids with $L1_2$ structure were formed during first MA of powers with Al-25at.%Zr composition. These metastable $Al_3Zr$ dispersoids transformed to stable $Al_3Zr$ with $DO_23$ structure when heat treated above $450^{\circC}$.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.2
• /
• pp.175-181
• /
• 2009

In this paper, it is suggested that the selection method of parameter of Power System Stabilizer(PSS) with robustness in low frequency oscillation for Static VAR Compensator(SVC) using a self tuning fuzzy controller for a synchronous generator excitation and SVC system. The proposed parameter self tuning algorithm of fuzzy controller is based on the steepest decent method using two direction vectors which make error between inference values of fuzzy controller and output values of the specially selected PSS reduce steepestly. Using input-output data pair obtained from PSS, the parameters in antecedent part and in consequent part of fuzzy inference rules are learned and tuned automatically using the proposed steepest decent method.