• 콘크리트학회논문집
• /
• 제14권5호
• /
• pp.774-781
• /
• 2002

본 연구에서는 국내에서 활용하고있는 지간거리 l0m인 실물크기 4개의 싱글티 슬래브의 댑 단부에 대하여 8번의 전단실험을 실행하였다. 시험체는 국내 규준의 주차장을 위한 활하중 500kgf/$m^2$와 매장용도를 위한 활하중 1,200 kgf/$m^2$을 적용하여 설계하였다. 강도설계규준을 모두 만족시키면서 시험체에 적용시킨 변수는 걸이철근의 배근방법을 다르게하여 적용시켰다. 현재 국내에서 활용하는 PCI 배근방법에의한 단면과, 90$^{\circ}$절곡배근, 60$^{\circ}$절곡배근에 대한 각 실험결과를 비교 분석하였다. 1) 5mm깊이 빗질로 거칠게 마감한 플랜지 상부의 모든 시험체는 종국파괴까지 토핑콘크리트와 일체 거동하였다. 강선의 정착구 파괴로 인한 조기 파괴된 하나의 시험체를 제외하고서 주어진 강도규준 설계를 대체로 만족시켰다. 2) 걸이철근의 여러 가지 형태를 변수로 두어 실험한 결과 복부 전단균열과 수직으로 배치된 60$^{\circ}$절곡 배근형태의 시험체가 사용하중과 종국하중에서 가장 우수한 결과를 나타냈으며, PCI 형태의 일반배근, 90$^{\circ}$절곡배근의 순으로 전단성능이 좋게 평가되었다.

• 자동차안전학회지
• /
• 제14권1호
• /
• pp.6-13
• /
• 2022

The Ministry of Land, Infrastructure and Transport (MoLIT) and the Korean Automobile Testing and Research Institute (KATRI) are supporting the development of Lv.3 automated vehicle (hereinafter, AV) technology by constructing an automated driving pilot city (as known as K-City) equipped with total 5 evaluation environments (urban, motorway, suburban, community road, and autonomous parking facility) which is a test bed exclusively for AV (2017~2018). An upgrade project is in a progress to materialize harsh environments such as bad weather (rain, fog, etc.) and reproduction of communication jamming (GPS blocking, etc.) with the purpose of supporting the development of Lv.4 connected & automated vehicle (hereinafter, CAV) technology (2019~2022). We intend to proactively establish a national level standard for CAV test-bed and test road requirements, test method, etc. for establishment of a road map for the construction of the test bed which is being promoted step by step and analyze and, when required, benchmark the case of China that has announced and is utilizing it. Through this, we plan to define standardized requirements (evaluation facility, evaluation system, etc.) on the test bed for the development of Lv.4/4+ CAV technology and utilize the same for the design and construction of a test bed, establishment of a road map for the construction of a real car-based test environment related to the support for autonomous driving service substantiation, etc. through provision of an evaluation environment utilizing K-City, and the establishment of a K-City upgrade strategies, etc.

• 한국농공학회지
• /
• 제42권
• /
• pp.85-91
• /
• 2000

Dwindling supplies and increasing costs of conventional highway materials used in road construction as well as concerns over shrinking landfill spaces prompt researchers to investigate the use of waste products, such as fly ash, as substitute materials in highway construction. The highway industry is capable of utilizing waste materials in large quantities if their effect on pavement performance proves to be technically, economically and environmentally satisfactory. This research examines the effects of fly ash when used as partial replacement of aggregate in asphaltic concrete mixtures. And measuring the effect of fly ash on bulk specific gravity, air void, indirect tensile strength (ITS) under dry and wet conditioning as well as the tensile strength ratio (TSR) of asphaltic concrete mixture. The results indicated that asphaltic concrete mixtures containing 2% and 5% fly ash produced about the same TSR value as control mixture. And all of the mixtures met the minimum ITS and TSR requirements established by the South Carolina Department of Transportation (SC DOT) for Type 1A surface courses. At this point and with this limited study, these asphaltic concrete mixtures is recommended in several applications such as parking lot, secondary roads and driveways.

• 한국조경학회지
• /
• 제34권5호
• /
• pp.14-23
• /
• 2006

Recently there have been great interest in the street landscapes, and numerous studies have been investigating shaping processes of urban landscapes, legal systems for scenery management, landscape preference and evaluation techniques. However, there are only few studies investigating how planting types influence on street landscape evaluation and how the relationships among street landscapes are. This study aims to make a guidelines which can be used for securing afforestation in urban settings and improving urban environment. In specific, the results of this study can provide guidelines for urban street design and the base knowledge for identifying appropriate requirements for better street landscapes. We identify factors which make shape certain images of street landscape, and draw physical factors influencing on visual appropriateness through visual landscapes evaluation process. To evaluate landscapes according to planting types, on-the-spot survey at 14 streets in Gang-Nam district were made. The district is under executing street improving projects and shows the most satisfying planting types. To evaluate street landscapes which people experience during their walking, 100m of continuous streets are chosen. The survey sites exclude streets with irregular pattern, are adjacent to large urban parks or are used as parking spaces in part. We evaluated 9 street landscapes classified into 1-line-planting, 2-line-planting and 3-line-planting on the basis of the location of planting and the planting methods.

• 한국ITS학회 논문지
• /
• 제23권2호
• /
• pp.142-156
• /
• 2024

교통부문 탄소중립을 위한 전기자동차로의 전환에 있어 충분한 충전 인프라의 구축은 중요한 선행요소이다. 특히, 거주지의 충전 인프라 구축은 필수적이다. 우리나라의 주거형태는 주로 공동주택이며, 다수의 거주민을 위한 공공 충전기가 공급되어야 한다. 정부는 충전시설과 전기자동차 전용주차구역의 확보를 법적으로 규정하고 있으나, 주차면수만을 산출근거로 한다. 완속 충전기는 3.5kW 과금형 콘센트와 7kW 완속 충전기가 주를 이룬다. 전자가 충전기 설치 및 이용에 유리하지만, 충전속도가 느려 두 가지 형태의 충전기는 양립이 필요하다. 본 연구에서는 일일 주행거리를 기반으로 산정한 전기자동차의 충전 수요에 대응할 수 있는 충전기를 할당하는 최적화 모형을 제시하였다. 또한, 메타 휴리스틱 알고리즘인 Tabu Search를 사용하여 최적화 모형을 만족하는 것과 동시에 충전기 공급 및 충전 비용을 최소화할 수 있는 완속 충전기 공급량을 산정하였다. 사례 분석을 위해 개인통행실태조사자료를 사용해 주행거리를 산정하였으며, 가상의 충전 시나리오 및 환경을 설정하여 100대의 전기자동차 충전 수요에 대응하는 22대의 3.5kW 과금형 콘센트를 최적 공급량으로 산정하였다.

• KCI Concrete Journal
• /
• 제14권1호
• /
• pp.36-42
• /
• 2002

Flexural behaviors of the two typical precast beam sections (inverted tee and rectangular) for buildings were investigated and compared. The height of web in the inverted tee beam was generally less than half of beam depth to be adapted to that of the nib in the ends of double-tee where the total building height limited considerably. The inverted-tee beams were designed for a parking live load - 500kgf/$m^2$ and a market - 1,200kgf/$m^2$ from the currently used typical shape of a domestic building site in Korea. The area and bottom dimension of rectangular beams were the same as those of inverted tee beams. These woo beams were also reinforced with a similar strength. following results were obtained from the studies above; 1) the rectangular beam is simpler in production, transportation, and erection, and more economic than the inverted tee beam in the construction test for these two beams with a same dimension and a similar strength, 2) all of the beams considered in the tests were generally failed in values close to those of the strength requirements in ACI Provisions. The ratios of test result to calculated value are averaged to 1.04. One rectangular and one inverted tee beams failed in a value only 2-3％ larger than the estimated volue of the Strength Design Methool the results of the Strain Compatibility Method wire slightly more accurate than those of the Strength Design Method, 4) the maximum deflections of all of the beams under the full service loads were less than those of the allowable limit in ACI Code Provisions. The rectangular beams experienced more deflection then inverted tee in the same loading condition and failed with more deflection, and 5) the rectangular and inverted tee beams showed good performances under the condition of service and ultimate loads. However, one inverted tee beams with fm span developed an initial flexural crackings under 88％ of the full service load even though they designed to satisfy the ACI tensile stress limit provisions.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.1278-1292
• /
• 2018

Inductive power transfer (IPT) technology allows for charging of electric vehicles with security, convenience and efficiency. However, the IPT system performance is mainly affected by the magnetic coupling structure which is largely determined by the coupling coefficient. In order to get this applied to electric vehicle charging systems, the power pads should be able to transmit stronger power and be able to better sustain various forms of deviations in terms of vertical, horizontal direction and center rotation. Thus, a novel cross-shaped magnetic coupling structure for IPT charging systems is proposed. Then an optimal cross-shaped magnetic coupling structure by 3-D finite-element analysis software is obtained. At marking locations with average parking capacity and no electronic device support, a prototype of a 720*720mm cross-shaped pad is made to transmit 5kW power at a 200mm air gap, providing a $1.54m^2$ full-power free charging zone. Finally, the leakage magnetic flux density is measured. It indicates that the proposed cross-shaped pad can meet the requirements of the International Commission on Non-Ionizing Radiation Protection (ICNIRP) according to the Australian Radiation Protection and Nuclear Safety Agency (ARPANSA).

• 한국실내디자인학회논문집
• /
• 제25권5호
• /
• pp.42-54
• /
• 2016

The purpose of this study is to provide a reference for stage planning by analyzing current state of major theaters' stage space and understanding feedback from directors belonged to theaters. Each room in total 18 theaters' stage facilities was measured and their usage and requirements were analyzed on the spot. In addition, each director provided their experiential knowledge about appropriate stage composition for musical performance. The findings are as follow: under stage machinery is not needed for musical. Tour teams prefer to use their own show-deck for set conversion. On the other hand, over stage flying system needs to be able to deal with dense, fast, and accurate scene change. The size and location of the motor room needs to be carefully considered. The number of set battens is directly linked up with the size of the motor room, which should be located lower than the gridiron. As stage sets get bigger and complicated, the number of works at the gridiron is also increasing. The grating floor has to have enough strength coping with machines lifting heavy sets. Most sound control for musical performance is being done at F.O.H. these days rather that in the sound control room. It should equip enough work area and related infra especially for tour teams. 1st gallery needs to have enough effective width, power infra for lighting fixture, and strong guardrail. Lastly, the whole process of parking-unloading-transporting equipments and sets from loading dock to stage and vice versa needs to be efficient, and this has to be carefully considered from early stage of planning.

• 한국조경학회지
• /
• 제30권2호
• /
• pp.12-22
• /
• 2002

This study examines the visitors'evaluations of tourism resources in Insa-dong, which the Seoul metropolitan government has improved recently. This study adopted the method of Importance-Performance Analysis by collecting data through questionnaires. A random sampling of visitors to Insa-dong was conducted in June and July,2001. The survey included questions on the physical and psychological components of Insa-dong's tourism resources. In the case of physical components, eight factors(ancient arts shop, art gallery, atelier, calligraphy shop, pottery arts, traditional tea house, antique shop, traditional clothes) out of thirteen were categorized as 'keeping up the good work'. None of the Physical components was shown as 'low priority'or'possible overkill'. In particular, four factors(restaurant, heritage, Korean-style house and alley, traditional cultural festival) need to be impoved most urgently in terms of visitors'satisfaction. Survey results realize them as high priority in importance but low in performance, thereby designated as, 'concentrate here'. An image of the 'street' showed to be high in importance and identical in performance, so can be categorized between'keeping up the good work'and 'concentrate here'. The results show that unusual outdoor spaces and the festivals of Insa-dong have a significant meaning to the visitors. In the case of psychological components, three factors(general atmosphere experience of unusual atmosphere, appropriateness of stroll time) out of seventeen were categorized as 'keeping up the good work'. Ore factor (shopping) was designated as 'low priority'and not found to be 'possible overkill'. Thirteen factors (various events, possibility of various activity, various flood, richness of play, new experience, education cultural inheritance, parking facilities, resting places, green spaces, meeting places, guide map and information, cleanliness of facilities/convenience) need to be improved mast urgently in terms of visitors' fulfillment. They are perceived as areas of 'concentrate here'. This confirms that attractive events are essential for the recent visitor satisfaction. Furthermore, visitors are not satisfied with its amenity and acccss in Insa-dong despite the improvements. In conclusion, positive impressions, both physical and psychological, should be maintained while factors mentioned to be lacking should be prioritized in order of necessity to improve the image of Insa-dong and solutions need to be found and implemented. The results of this study would be helpful in the planning and management of nsa-dong considering the visitors'requirements.

• 대한교통학회지
• /
• 제21권6호
• /
• pp.27-42
• /
• 2003

공항개발 사업을 계획하는 데 있어서 가장 기본이 되는 요소는 항공수요 중에서도 첨두시의 수요이다. 통상 첨두시 수요를 근거로 공항시설의 소요규모를 정하는 것이 일반적이며 시설용량의 포화 정도를 가늠할 때도 첨두시 수요를 기준으로 한다. 첨두운항의 형태는 해당 공항을 이용하는 항공 노선의 특성, 공항의 지리적 위치, 공항을 이용하는 여객 및 화물의 특성 등에 따라서 다르게 나타나며, 첨두수요는 첨두시간계수에 의해 산출된다. 지금까지 국내의 공항건설계획에서 채택해온 첨두특성과 첨두시간계수는 외국의 연구결과에 따른 것이었다. 그러나 이들 기존의 연구결과가 제시하는 다양한 첨ㄷ특성이나 첨두시간계수가 국내 실정에 적합한 지의 여부는 아직 공식적으로 확인된 적이 없다. 본 논문에서는 최근 10년간의 국내 공항별 항공운송 실적통계와 5년간의 공항별 운항스케줄을 이용하여 시간대별 운항패턴과 첨두특성을 분석하였다. 그리고 공항별 첨두시간계수를 산출하고 기존의 연구결과와 비교분석하였으며, 국내공항의 사업계획을 위한 연간운항회수별 첨두시간계수를 제시하였다. 또한 공항별로 시간대별 주기장 소요를 분석함으로써 운항특성에 따라 주기장 소요가 어떤 양상을 보이는지 연구하였다.