• 한국자기공명학회논문지
• /
• 제7권2호
• /
• pp.74-79
• /
• 2003

Li[Ni,Mn,Co]O$_2$ electrode has been studied by $\^$7/Li MAS NMR. A sharp resonance at -1 ppm and a very broad resonance at approximately 400 ppm are assigned to the Li ions in Co-only environment and Ni/Mn(Co) environment, respectively, indicating a segragation of Co ions and Ni/Mn ions. Different temperature behavior of the peak position is observed for Co-only environment and Ni/Mn(Co) environment. Oxidation of Ni ions is involved during the entire charging process. At high temperature, a peak narrowing caused by the electron hopping is observed.

• Journal of Mechanical Science and Technology
• /
• 제18권3호
• /
• pp.453-459
• /
• 2004

TiNi/ Al6061 shape memory alloy (SMA) composite was fabricated by hot press method to investigate the microstructure and mechanical properties. Interface bonding between TiNi reinforcement and A1 matrix was observed by using SEM and EDS. Pre-strain was imposed to generate compressive residual stress inside composite. A tensile test for specimen, which under-went pre-strain, was performed at high temperature to evaluate the variation of strength and the effect of pre-strain. It was shown that interfacial reactions occurred at the bonding between matrix and fiber, creating two inter-metallic layers. And yield stress increased with the amount of pre-strain. Acoustic Emission technique was also used to nondestructively clarify the microscopic damage behavior at high temperature and the effect of pre-strain of TiNi/ Al6061 SMA composite.

• 한국결정성장학회지
• /
• 제26권5호
• /
• pp.165-170
• /
• 2016

We have synthesized $Pt_xNi_y$ alloy nanodendrites by a thermal decomposition method. The structure and composition of the as-prepared samples were characterized by field-emission transmission electron microscopy (FE-TEM), energy dispersive X-ray (EDX) spectroscopy, and X-ray diffraction (XRD). The growth mode of the $Pt_xNi_y$ alloy samples synthesized as a function of an intended atomic fraction of Ni was likely to be strongly affected by and reduction (or oxidation) potentials and surface energy.

• 마이크로전자및패키징학회지
• /
• 제14권4호
• /
• pp.27-36
• /
• 2007

본 논문에서는 다양한 조성의 주석-은-구리 합금계 솔더볼과 ENIG 및 Cu-OSP 패드와의 계면 반응에 대해 연구하였다. ENIG 패드와 미량의 Sb이 첨가된 합금 솔더와의 계면 반응 시 다른 솔더에 비해 매우 얇은 100 nm 내외의 두께를 가진 P-rich Ni layer가 형성되었다. 미량의 Ni이 첨가된 합금 솔더와 Cu-OSP 금속 패드와의 계면 반응 시에는 다른 솔더와는 달리 균일한 두께의 $Cu_6Sn_5$ 금속간화합물이 형성되었으며 추가 리플로우 시에 금속간화합물 입자가 거의 성장하지 않았다. 또한 $150^{\circ}C$의 장시간 열처리 시에 다른 솔더에 비해 매우 얇은 두께의 $Cu_3Sn$ 금속간화합물이 형성되었다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2003년도 하계학술연구발표회 및 한.일 공동심포지엄
• /
• pp.126-127
• /
• 2003

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.573.2-573
• /
• 2001

The objective of this study was to compare the apical shaping ability of the ProFile .04 taper, Lightspeed and HERO 642 rotary instruments and to assess the combined effect of GT Rotary files to Lightspeed and HERO 642 instruments. Forty-eight resin simulated root canal blocks divided into 4 groups with 12 canals. Forty-eight blocks were prepared by one operator with GT Rotary files using a high torque handpiece at 300 rpm. Thirty-six blocks in the three experimental groups were prepared with ProFile 04 taper file, Lightspeed file, HERO 642 file.(omitted)

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
• /
• pp.667-672
• /
• 2005

In order to effectively utilize visible light in the photocatalytic reaction, nanaocomposite of Ni doped $TiO_2$ and $NiTiO_3$ powders were synthesized by mechanical alloying and heat treatment. About 5.4 wt% of $NiTiO_3$ with particle size less than 15nm was uniformly formed in the Ni-doped rutile $TiO_2$ matrix. The UV/VIS-DRS and PL investigation showed that the nanocompasite $TiO_2$ powders had a longer absorpt ion wavelength (600$\sim$650nm, 2.0$\sim$1.9eV) than that of Ni-doped $TiO_2$ or rutile $TiO_2$ powder. The carbon decomposition of 4-CP by the nanocompasite $TiO_2$ powders were higher than other $TiO_2$ (P-25).

• 대한기계학회논문집A
• /
• 제29권10호
• /
• pp.1315-1320
• /
• 2005

TiNi alloy fiber was used to recover the original shape of materials using its shape memory effect. The shape memory alloy plays an important role within the metal matrix composite. The shape memory alloy can control the crack propagation in metal matrix composite, and improve the tensile strength of the composite. In this study, TiNi/A16061 shape memory alloy(SMA) composite was fabricated by hot press method, and pressed by a roller for its strength improvement. The four kinds of specimens were fabricated with $0\%,\;3.2\%,\;5.2\%\;and\;7\%$ and volume fraction of TiNi alloy fiber, respectively. A fatigue test has performed to evaluate the crack initiation and propagation for the TiNi/A16061 SMA composite fabricated by かis method. In order to study the shape memory effect of the TiNi alloy fiber, the test has also done under both conditions of the room temperature and high temperature. The relationship between the crack growth rate and the stress intensity factor was clarified for the composite, and the cold rolling effect was also studied.

• 대기
• /
• 제23권1호
• /
• pp.63-71
• /
• 2013

KMA is operationally monitoring El Ni$\tilde{n}$o and La Ni$\tilde{n}$a events, which have tremendous impacts on global climate. Many scientific studies have used to define onset of El Ni$\tilde{n}$o and La Ni$\tilde{n}$a events based on the moving average and persistency of SST indices, and KMA has adopted such definition. Though the definition has been widely accepted, in the operational aspect there is a critical problem to use moving average and condition for the persistence. Because the future values for the SST indices cannot be used in the operational monitoring, the onset timing in El Ni$\tilde{n}$o and La Ni$\tilde{n}$a can be significantly delayed. We suggest here an appropriate definition of El Ni$\tilde{n}$o and La Ni$\tilde{n}$a events in the operational aspect. Instead of using the moving average and the condition for the persistence, the onset is defined based on NINO3.4 SST during last 3 months. In order to compare the new definition with the current KMA definition, we applied them to recent 60-years SST data. It is clear that the new definition can declare the onset timing of El Ni$\tilde{n}$o and La Ni$\tilde{n}$a several months earlier than that of the KMA definition. It suggest that the new definition is more appropriate to the operational monitoring on El Ni$\tilde{n}$o and La Ni$\tilde{n}$a.

• Journal of Electrochemical Science and Technology
• /
• 제7권1호
• /
• pp.33-40
• /
• 2016

Sr_0.92Y_0.08TiO_3-δ (SYT) was investigated as an alternative anode in humidified CH₄ fuel for SOFCs at low temperatures (650 ℃-750 ℃) and compared with the conventional Ni/yttria-stabilized zirconia (Ni/YSZ) anode. The goal of the study was to directly use a hydrocarbon fuel in a SOFC without a reforming process. The cell performance of the SYT anode was relatively low compared with that of the Ni/YSZ anode because of the poor electrochemical catalytic activity of SYT. In the presence of CH₄ fuel, however, the cell performance with the SYT anode decreased by 20%, in contrast to the 58% decrease in the case of the Ni/YSZ anode. The severe degradation of cell performance observed with the Ni/YSZ anode was caused by carbon deposition that resulted from methane thermal cracking. Carbon was much less detected in the SYT anode due to the catalytic oxidation. Otherwise, a significant amount of bulk carbon was detected in the Ni/YSZ anode.