• Journal of Korean Academy of Oral Health
• /
• v.42 no.4
• /
• pp.210-215
• /
• 2018

Objectives: The main objectives of this study were to verify the antibacterial activity of two essential oils, lavender and peppermint, against dental caries and to review their synergistic effect when used in combination. Our results provide basic data for the evaluation of the use of these two substances towards the prevention and cure of dental caries. Methods: The sample solutions of lavender and peppermint oils were prepared in three different concentrations (30%, 50%, and 70% (v/v)) by diluting them with third-distilled water and Tween 20. Streptococcus mutans was selected as the bacterial species for testing. The disk diffusion method was used to measure the antibacterial activity of the sample solutions. For generating growth curves and measuring the number of clusters of the bacterial, the liquid medium-dilution method was used; the absorbance of the medium was measured at 600 nm after 3, 6, 12 and 24 hours. Results: When the antibacterial activity of the oils was tested via the disk diffusion method, the activity improved with increasing concentrations of all the sample solutions of peppermint, lavender, and the blend, but there was no significant difference between them with respect to the type of oil. In the growth curves of S. mutans, growth inhibition was observed after 12 hours. The inhibitory effect of 30% lavender oil on growth was 64.9% and 80.1% after 12 and 24 hours of treatment, respectively whereas that of peppermint oil was 71.3% and 80.1% after 12 and 24 hours of treatment, respectively. The inhibitory effect of the blended oil was 71.9% and 81.0% after 12 and 24 hours of treatment, respectively. Conclusions: Further research is still required in order to determine the efficacy of lavender and peppermint oils, as well as other essential oils, for wider use in preventing dental caries.

• Tribology and Lubricants
• /
• v.36 no.6
• /
• pp.365-370
• /
• 2020

Recently, additive manufacturing (AM) technology has been applied to various industries such as automotive, aviation, medical, and electronics. Most prior studies are limited to the mechanical properties of printed materials, and few studies are being conducted on their tribological characteristics. However, the friction and wear characteristics of the material should be studied in order to utilize the components manufactured using AM technology as mechanical parts. In this study, the friction and wear characteristics of acrylonitrile-butadiene-styrene (ABS)-like resin printed with stereo lithography apparatus (SLA) 3D printing are evaluated according to the viscosity of silicon oil lubricant using a ball-on-disk experiment. Lubricants with a viscosity of 500, 1000, and 2000 cSt are prepared for the experiment. If silicon oil lubricants are used during the ball-on-disk test, the coefficient of friction (COF) and wear rates are significantly reduced, and the higher the viscosity of the lubricant, the lower will be the COF and wear rates. It is also verified that the temperature of the specimen owing to friction also decreases according to the viscosity of the lubricant. This is because of the silicon oil film thickness, and the higher the viscosity of the lubricant, the thicker will be the oil film. More studies on the tribological characteristics of 3D printing materials and suitable lubricants will be required to use 3D printed parts as mechanical elements.

• Textile Coloration and Finishing
• /
• v.34 no.1
• /
• pp.20-26
• /
• 2022

Centrifugal spinning is an emerging technique for fabricating micro-to-nano-fibers in recent years. To obtain fibers with the desired size and morphology, it is necessary to configure and optimize the parameters used in centrifugal spinning. In this study, it was controlled by changing the solution's concentration (7.5, 10, and 12.5 wt.%) and disk's rotational velocity (6,000, 8,000, and 10,000 rpm) to prepare centrifugal spun nano-filter. The morphological property, air permeability, and dust collection efficiency of the PVA/PP bi-layer nanoweb prepared by centrifugal spun PVA on the PP micron nonwoven substrate are studied using a field emission scanning electron microscope, an air permeability tester, and a filter tester equipment, and the analysis results indicate that it is suitable as a nano-filter when the concentration of PVA solution is 10 wt.% and the rotational velocity of the disk is 8,000 rpm. The resultant reduced diameter and uniform fibers also proved that an excellent dust collection efficiency filter could be made.

• Journal of Acupuncture Research
• /
• v.40 no.3
• /
• pp.252-264
• /
• 2023

Background: The primary aim of this study is to statistically analyze and compare the difference in treatment outcomes based on the frequency and duration of acupotomy treatment for lumbar disk herniation. Methods: The evaluation of efficacy and safety involved using visual analog scale (VAS), numeric rating scale (NRS), Roland Morris disability questionnaire (RMDQ), EuroQol 5-dimention (EQ-5D), and similar parameters. This was achieved through the establishment of a comparable cohort using propensity score matching. Group A comprised 46 patients who underwent 4 sessions of acupotomy treatment for 2 weeks, while Group B consisted of 15 patients who received 6 acupotomy sessions for 3 weeks. Results: For Group A, the average amount of change in VAS values at weeks 4 and 6 was significantly decreased. However, the average amount of change in RMDQ values was not significant. Notably, the average amount of change of EQ-5D values at week 6 increased significantly. As for Group B, the average amount of change of NRS values in weeks 2 and 3 was significantly decreased. Conversely, the average amount of change in RMDQ and EQ-5D values was not significant. In comparing the 2 groups at the final follow-up, the average amount of change in all evaluation values was not significant. Further, no significant interaction effect was observed in the changes over time in all evaluation values between the 2 groups. Conclusion: This study establishes that there was no statistically significant difference in pain reduction, functional impairment, and quality of life improvement between 2 group.

• Journal of The Korean Society of Integrative Medicine
• /
• v.11 no.2
• /
• pp.149-157
• /
• 2023

Purpose : In this study, to prove the antibacterial effect of Disocorea batatas, which is widely used for food, and to confirm the growth inhibitory effect, the antibacterial activity against L. gasseri, S. mutans, and P. gingivalis was verified. Based on this, it is intended to verify the utility as a preventive and therapeutic composition for dental caries and periodontal disease. Methods : RAW 264.7 cells were used to verify the cell survival rate and NO (Nitric Oxide) inhibitory effect on Disocorea batatas ethanol extract (DBEE). In order to verify the antibacterial effect against L. gasseri, S. mutans, and P. gingivalis, concentrations of 125, 250, and 500 ㎎/㎖ of DBEE were used and measured by the disk diffusion method. In order to confirm the growth inhibitory effect, the absorbance was measured at 600 ㎚ at 3, 6, 12, 18, and 24 hours using the liquid medium dilution method, and the growth inhibitory effect was measured compared to the control group. Results : The cell viability for DBEE was 91 % at 50 ㎎/㎖, and there was no cytotoxicity. The NO production inhibitory effect was shown from 10 ㎍/ml, and the higher the concentration, the greater the inhibitory effect. As for the antimicrobial effect using the disk diffusion method, the higher the concentration, the higher the antibacterial effect. At 125 ㎎/㎖ and 250 ㎎/㎖, S. mutans and L. gasseri showed high antimicrobial activity, and at 500 ㎎/㎖, the antibacterial effect was higher in L. gasseri. The growth inhibitory effect in DBEE was concentration-dependent as the higher the concentration, the higher the growth inhibitory effect, and all of them began to show growth inhibitory effects from 6 hours. Conclusion : Considering that it is widely used as an edible and medicinal material, Disocorea batatas has shown the potential to be used as a substance to prevent and alleviate dental caries and periodontal diseases, and it is believed that further research can be applied to oral health care products.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.517-526
• /
• 2023

To avoid arbitrary design and excessive braces of system supports with high reusability in the field, this study aimed to propose connection conditions for the vertical and horizontal joints of the system supports based on performance evaluation. Disk-type and pocket-type connection materials, widely used in domestic construction sites, were selected for evaluation of rotational stiffness based on load directions(vertical and horizontal) and loading methods (monotonic and cyclic). Contrary to the current design standards specifying a rotational stiffness of "0" for connection materials, the experimental results revealed that, contrary to the current design standards specifying a rotational stiffness of "0" for connection materials, all specimens exhibited rotational stiffness values. The maximum rotational stiffness was observed to be 19.624 kNm/rad in specimens subjected to repeated loading in the vertical direction using disk-type connection materials.

• The Korean Journal of Pesticide Science
• /
• v.9 no.4
• /
• pp.429-436
• /
• 2005

As Sclerotinia sclerotiorum causing cucumber sclerotinia rot was the fastest in the mycelial growth at $25^{\circ}C$, its pathogenicity was strong at the same temperature among several temperatures. All the isolates of Sclerotinia sclerotiorum showed a strong pathogenicity against cucumber fruits, which was confirmed by a disk assay and a wound assay. A wound assay was superior to a disk assay to develop the assay system for assessing the fungicidal activity of several fungicides against Sclerotinia sclerotiorum. In a disk assay, it was very difficult to assess the fungicidal activity, because the pathogenicity of isolates used in the experiment was very strong. At 500 and $3.0{\mu}g/mL$, the activity of dichloflouanid and the mixture of carbendazim and diethofencarb against cucumber sclerotinia rot was 14.3 and 42.3%, respectively, by using a disk assay. However, at same concentration two fungicides showed the high controlling activity as 100 and 92.5%, through a wound assay in a laboratory. Also, the activity of two fungicides was good against cucumber sclerotinia rot in the greenhouse where cucumber plants were cultivated in the field, showing the control value as 91.1 and 82.9% at 100 and $825{\mu}g/mL$, respectively. All the isolates of Sclerotinia sclerotiorum from cucumber fruits sampled in the polyvinyl house were subjected to monitoring for the resistance to 7 fungicides. The $EC_{50}$ value of 7 fungicides was as follows: fenhexamid; $0.13{\mu}g/mL$, procymidon and iprodione; 0.18 and $0.24{\mu}g/mL$, carbendazim and the mixture of carbendazim and diethofencarb; 0.13과 $0.05{\mu}g/mL$, iminoctadine and dichlofluanid; 1.94 and $8.95{\mu}g/mL$. Ultimately it was not found that resistant isolates of Sclerotinia sclerotiorum were appeared in the field.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.3 s.96
• /
• pp.341-345
• /
• 2005

Structural Dynamics Modification (SDM) is a very effective technique to improve structure's dynamic characteristics by adding or removing auxiliary structures, changing material properties and shape of structure. Among those of SDM technique, the method to change shape of structure has been mostly relied on engineer's experience and trial-and-error process which are very time consuming. In order to develop a systematic method to change structure shape, surface grooving technique is studied. In this work, the shape of base structure was modified to improve its dynamic characteristics such as natural frequencies via surface grooving technique. Grooving shape was formed by mergingthe neighboring small embossing elements after analyzing frequency increment sensitivities of all the neighboring emboss elements. For this process, Criterion Factor was introduced and the initial grooving was started from the element having highest strain energy and the grooving is expanded into neighboring element. The range of targeting grooving area to check its frequency variations restricted to their neighboring area to reduce the computation effort. This surface grooving technique was successfully applied to a hard disk drives (HDD) cover model to raise its natural frequency by giving some groove on its surface.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.3
• /
• pp.245-250
• /
• 2004

This paper proposes a new method of measuring an air interface distance between a solid immersion lens(SIL) applied magneto-optic technology and the disk surface. For applying near-field recording (NFR) technology to the magneto-optic storage devices for the next generation, it is positively necessary to maintain the small air gap under about 100㎚. We design an apparatus that consists of some optical components such as a prism, a polarizer and an analyzer. By using the Fresnel reflection coefficient equation, Jones matrices calculation and Malus's law, we establish a mathematical model for understanding the characteristics of the system. The simulations are based on the mathematical model and through the simulation results which is made with various cases we can estimate the performance of the new optical gap sensor system. Experimental results, which are also based on the mathematical model for specific cases, are in good agreement with simulated ones and demonstrate the possibility as the new optical gap sensor.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.2
• /
• pp.161-168
• /
• 2005

This paper optimizes the optical flying head(OFH) suspension using the integrated optimization frame, which automatically integrates the analysis with the optimization and effectively implements the repetitive works between them. The problem formulation for the optimization is suggested to improve the dynamic compliance of OFH and to shift the resonant frequencies caused tracking errors to high frequency domain. Furthermore, the minimization of the effective suspension mass that leads to decrease the so-called 'lift-off' as the disk-head separation acceleration divided by the suspension load is taken into consideration. In particular, this study is carried out the optimal design considering the process of modes tracking through the entire optimization processes. The advanced suspension that reduces the effective mass of the suspension and increases the resonant frequencies of sway and $2^{nd}$ torsion over 10kHz is achieved by using the integrated optimization frame.