• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.1 s.139
• /
• pp.57-63
• /
• 2005

This paper introduces basic research of optimum routing assessment system as voyage support purpose which can obtain safe and efficient route. In view point of safety, the prediction of ship motion should be evaluated in the condition of rough weather This part includes general seakeeping estimation based on 3 dimensional panel method and parametric roil prediction. For increasing voyage efficiency, ETA(Estimated Time of Arrival) and fuel consumption should be calculated considering speed reduction and power increase due to wave effects based on added resistance calculation and ship performance characteristics. Basically, the weather forecast is assumed to be prepared previously to operate this system. The idea of these factors in this system will be helpful to escape from dangerous voyage situation by wave conditions and to make optimum route planning based on ETA and fuel consumption.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.565-571
• /
• 2001

As a method of structural optimization, a practical algorithm based on the Taguchi method is developed. The Taguchi method is applied iteratively updating the level values of design variables. The design region is translated or reduced during optimization and by appropriate choice of reduction factor and initial level intervals, a near-optimum solution can be found very efficiently. To treat inequality constraints, a variable penalty method is utilized. A software system named 'DS/Taguchi' is developed by integrating the proposed algorithm and commercial finite element analysis codes on the parametric CAD platform. Two examples are taken to examine the performance of the proposed algorithm and the developed software system.

• Journal of Power System Engineering
• /
• v.13 no.5
• /
• pp.46-51
• /
• 2009

Recently, the shock resistance and dynamic characteristics of hard disk drives have become more important due to their highly increased storage density and miniaturization. In this study, we have developed an ANSYS/Mechanical/LS-DYNA based HDD vibration/shock simulation tool for design engineers. This simulation tool using ANSYS APDL can produce a parametric finite element modeling of HDD automatically and has GUI-based applications using the script program language Tcl/Tk. In the present tool, we adopt the reliable methodology of vibration/shock simulation, which is experimentally verified. It is expected that this simulation tool can make the repetitive computational efforts for the shock-proof design of HDD drastically reduced.

• Korean Institute of Interior Design Journal
• /
• v.24 no.1
• /
• pp.207-215
• /
• 2015

It seems obvious that the spatial information of existing architectural heritage will be re-structured utilizing BIM technology. In the future to be able to implement such task, a new system of classification of spatial information, which fit to the structural nature of architectural heritage is necessary. This paper intend to suggest the conceptual model that can be the base of establishing new classification system for architectural heritage. For this study we reviewed researches related to classification system of architectural heritage (CS-AH) and BIM based architectural heritage (BIM-AH), first. As a result, we found that CS-AH is focused on building elevation and type, and BIM-AH is biased on the Library and Parametric Modeling. Second, we figured out a relationship between the CS-AH and BIM-AH. From this analysis, we found that BIM-AH is biased on Library and Parametric since the building elevation and type was focused on CS-AH. This review suggests a potential of the 3D CS-AH to expand the range of research for BIM-AH. At last, we suggest the three concept of classification are: 1)horizontality-accumulation relationship, 2)structure-infill relationship, 3)segment-member relationship. These three concept, together as one system of classification, could provide useful framework of new classification system of spatial information for architectural heritage.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.927-930
• /
• 1992

VSS identification approach is based on following concept, i.e. while in sliding motion, the switching of control inputs refects system uncertainites. Therefore, if there exist some operations that make the information form the switiching control inputs be achievable, then the unknown parameters can be actually identification mechanisms which can fully make use of the available information. Two different types of VSS identifiers are taken into consideration. The first type uses adjustable model whose structure is similar to that of identified systems. From the viewpoint of contro, this type of VSS identifiers may be regraded as direct identifier vecause the identified system is handled as an open loop. On the other hand, if the identified system is controlable in the sense of VSS(sliding mode can be generated through chosing control inputs), the second type of VSS identifier, the indirect VSS identifier, can be constructed according to the linerized system strucutre while staying in sliding mode. Therefroe it can be applied to some nonlinear systems which are not linear in parametric space by general identification algorithms, whereas linear in parametric space when sliding mode is existed.

• Tribology and Lubricants
• /
• v.17 no.3
• /
• pp.198-208
• /
• 2001

A Parametric study based on a computer analysis of the lubrication system of a four-cylinder gasoline engine is illustrated. Through the parametric study, the effects of various aeration levels on the change of oil flow rate and pressure are investigated. Also, at high oil temperature and low engine speed, the effect of oil aeration level on oil flow characteristics in lubrication system is investigated. The illustrated results may give to designers the guide lines of oil aeration level for the safe design of engine lubrication systems in terms of minimum pressure at crank oil bore.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.2
• /
• pp.153-160
• /
• 2013

Control allocation is an important part of a system. It implements the function that map the desired command forces from the controller into the commands of the different actuators. In this paper, the authors present an approach for solving constrained control allocation problem in vessel system by using multi-parametric quadratic programming (mp-QP) algorithm. The goal of mp-QP algorithm applied in this study is to compute a solution to minimize a quadratic performance index subject to linear equality and inequality constraints. The solution can be pre-computed off-line in the explicit form of a piecewise linear (PWL) function of the generalized forces and constrains. The efficiency of mp-QP approach is evaluated through a dynamic positioning simulation for a vessel by using four tugboats with constraints about limited pushing forces and found to work well.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.63-64
• /
• 2007

In this paper, an adaptive passivity based excitation and governor control scheme is proposed to enhance the transient stability of a single machine infinite bus power system with parametric uncertainties. We employ a state model where the frequency, the difference between active and mechanical power, and the difference between the squared terminal voltage and its reference are regarded as state variables. Using this state model, the proposed controller is obtained in two steps; firstly, a simple direct adaptive passivation controller is designed for the power system with parametric uncertainties; then a linear PI controller is applied to guarantee the stability of the closed loop system.

• IE interfaces
• /
• v.16 no.spc
• /
• pp.138-143
• /
• 2003

In this paper, an automated design system for ball-joint parts based on 3-D solid modeler is developed. Parametric modeling and API provided by 3-D solid modeler is engaged to develope the system which consists of four main modules such as : 3-D part modeling, parts assembling, 2-D drafting, and database interfacing modules. The automated design system is implemented on a computer, and shows us that it shorten the design processing time which have taken over 5 hours to only few minutes.

• Journal of Digital Convergence
• /
• v.11 no.9
• /
• pp.147-151
• /
• 2013

On retrieving high frequency keywords in information retrieval system, mismatchings to user's request are problems because of the various meanings of keywords in the existing ontology configuration. In this paper, it is to construct personnel selection ontology and rules in personnel management which are composed of various concepts and knowledges based on semantic web technology and suggest selection procedures to support these rules and knowledge retrieval system to verify suitability of selection results. This system utilizes a method of extraction of speech features by using non-parametric correlation coefficient. This proposed method has been validated by showing that the result average SNR of the experiment evaluation of the proposed techniques was shown to be decreased by .752dB.