• Title/Summary/Keyword: Parametric Surface

Search Result 512, Processing Time 0.023 seconds

Shell Finite Element Based on B-Spline Representation for Finite Rotations (B-Spline 곡면 모델링을 이용한 기하비선형 쉘 유한요소)

  • 노희열;조맹효
    • Proceedings of the Computational Structural Engineering Institute Conference
    • /
    • 2003.10a
    • /
    • pp.429-436
    • /
    • 2003
  • A new linkage framework between elastic shell element with finite rotation and computar-aided geometric design (CAGD) (or surface is developed in the present study. The framework of shell finite element is based on the generalized curved two-parametric coordinate system. To represent free-form surface, cubic B-spline tensor-product functions are used. Thus the present finite element can be directly linked into the geometric modeling produced by surface generation tool in CAD software. The efficiency and accuracy of the Previously developed linear elements hold for the nonlinear element with finite rotations. To handle the finite rotation behavior of shells, exponential mapping in the SO(3) group is employed to allow the large incremental step size. The integrated frameworks of shell geometric design and nonlinear computational analysis can serve as an efficient tool in shape and topological design of surfaces with large deformations.

  • PDF

Influence of mass and contact surface on pounding response of RC structures

  • Khatiwada, Sushil;Larkin, Tam;Chouw, Nawawi
    • Earthquakes and Structures
    • /
    • v.7 no.3
    • /
    • pp.385-400
    • /
    • 2014
  • Pounding damage to bridges and buildings is observed in most major earthquakes. The damage mainly occurs in reinforced concrete slabs, e.g. building floors and bridge decks. This study presents the results from pounding of reinforced concrete slabs. A parametric investigation was conducted involving the mass of the pendulums, the relative velocities of impact and the geometry of the contact surface. The effect of these parameters on the coefficient of restitution and peak impact acceleration is shown. In contrast to predictions from numerical force models, it was observed that peak acceleration is independent of mass. The coefficient of restitution is affected by the impact velocity, total participating mass and the mass ratio of striker and struck block.

Parametric studies on smoothed particle hydrodynamic simulations for accurate estimation of open surface flow force

  • Lee, Sangmin;Hong, Jung-Wuk
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • v.12 no.1
    • /
    • pp.85-101
    • /
    • 2020
  • The optimal parameters for the fluid-structure interaction analysis using the Smoothed Particle Hydrodynamics (SPH) for fluids and finite elements for structures, respectively, are explored, and the effectiveness of the simulations with those parameters is validated by solving several open surface fluid problems. For the optimization of the Equation of State (EOS) and the simulation parameters such as the time step, initial particle spacing, and smoothing length factor, a dam-break problem and deflection of an elastic plate is selected, and the least squares analysis is performed on the simulation results. With the optimal values of the pivotal parameters, the accuracy of the simulation is validated by calculating the exerted force on a moving solid column in the open surface fluid. Overall, the SPH-FEM coupled simulation is very effective to calculate the fluid-structure interaction. However, the relevant parameters should be carefully selected to obtain accurate results.

Enhancement in Isolation among Collinearly Placed Microstrip Patch Antenna Arrays

  • Irfan Ali, Tunio;Hernan, Dellamaggiora;Umair, Saeed;Ayaz Ahmed, Hoshu;Ghulam, Hussain
    • International Journal of Computer Science & Network Security
    • /
    • v.23 no.1
    • /
    • pp.120-124
    • /
    • 2023
  • Strong surface waves among collinearly arranged patch antenna arrays pose unwanted inter element coupling particularly when high permittivity dielectric materials are used. In order to avert those waves, a novel Defected Ground Structure (DGS) is carved out systematically between two E-plane patch antenna elements. The introduced low profile μ shaped structure consequently improves impedance bandwidth and reflection coefficient by suppressing surface waves considerably. Parametric simulation results are analyzed and discussed.

Parametric Study for Structural Reinforcement Methods of Disposal Container for NPP Decommissioning Radioactive Waste

  • Hyungoo Kang;Hoseog Dho;Jongmin Lim;Yeseul Cho;Chunhyung Cho
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.21 no.3
    • /
    • pp.329-345
    • /
    • 2023
  • This paper described a method for analyzing the structural performance of a metal container used for disposing radioactive waste generated during the decommissioning of a nuclear power plant, and numerical analysis results of a method for reinforcing the container. The containers to be analyzed were those that can be used in near-surface and landfill disposal facilities scheduled to be operated at the Gyeongju radioactive waste disposal facility. Structural reinforcement of the container was performed by lattice reinforcement, column reinforcement, and bottom plate reinforcement. Accordingly, a total of 14 reinforcement cases were modeled. The external force causing damage to the container was set equivalent to the impact of a 9-m fall, accounting for the height of the vault at the near-surface disposal facility. The reinforcement methods with a high contribution to the structural performance of the container were concluded to be lattice and column reinforcements.

Assessment of metal artifacts in three-dimensional dental surface models derived by cone-beam computed tomography

  • Nabha, Wael;Hong, Young-Min;Cho, Jin-Hyoung;Hwang, Hyeon-Shik
    • The korean journal of orthodontics
    • /
    • v.44 no.5
    • /
    • pp.229-235
    • /
    • 2014
  • Objective: The aim of this study was to assess artifacts induced by metallic restorations in three-dimensional (3D) dental surface models derived by cone-beam computed tomography (CBCT). Methods: Fifteen specimens, each with four extracted human premolars and molars embedded in a plaster block, were scanned by CBCT before and after the cavitated second premolars were restored with dental amalgam. Five consecutive surface models of each specimen were created according to increasing restoration size: no restoration (control) and small occlusal, large occlusal, disto-occlusal, and mesio-occluso-distal restorations. After registering each restored model with the control model, maximum linear discrepancy, area, and intensity of the artifacts were measured and compared. Results: Artifacts developed mostly on the buccal and lingual surfaces. They occurred not only on the second premolar but also on the first premolar and first molar. The parametric values increased significantly with increasing restoration size. Conclusions: Metallic restorations induce considerable artifacts in 3D dental surface models. Artifact reduction should be taken into consideration for a proper diagnosis and treatment planning when using 3D surface model derived by CBCT in dentofacial deformity patients.

CAD/CAM System development using the Database (데이터베이스를 활용한 CAD/CAM System개발에 관한 연구)

  • Myeong, Tae Sik;Kim, Tae Gyu;Kim, Ok Hyeon
    • Journal of the Korean Society of Manufacturing Technology Engineers
    • /
    • v.8 no.2
    • /
    • pp.116-116
    • /
    • 1999
  • In this study we propose a novel approach with which design engineers can define and design free-from surface more easily. Free-from surface is defined as a parameterics shape which consists of a set of contr ol points. Parametric shape which not only has the advantage of allowing users to perform design changes efficiently, but also provides designers with a natural design environment in which they can do their work more naturally and creatively. The objective of this study is to develop a PC level freeform surface modelling system which explicitly represents information of part geometry. In this study, freeform surface modeling system consist of three modules : freeform surface modeler, input/output modules and interface with Database. In recent year there are increasing demands for the 5-axis machining of a complicated shape. This study is the development of a CAM software system (or NC module) for the 5-axis machining of a general shape with a flat-end mill, a round-end mill, a ball-end mill.

Adaptive Control of Machined Surface Using Current of the Feed Motor at Rest (정지상태 모터의 전류 신호를 이용한 피삭재의 가공면 적응제어)

  • 정영훈;윤승현;조동우
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 1997.10a
    • /
    • pp.79-82
    • /
    • 1997
  • The current from the feed motor of a machine tool contains substantial information about the machining state. There have been many researches that investigated the current as a measure for the cutting forces. However it has not been reported that indirect measurement of the cutting forces from the current of the feed motor at rest is possible. The cutting force normal to the machined surface influences the machined surface of the workpiece, which makes it necessary to estimate this force to control the roughness of the machined surface. But the unpredictable behavior of the current prevents applying the current to prediction of the cutting state. In this paper, empirical approach was conducted to resolve the problem. Also parametric adaptive and fuzzy logic control strategies are applied to the force regulation problem. As a result, the current is shown to be related to the accumulation of the infinitesimal rotation of the motor, and besides the unpredictable behavior of the current is shown to be caused by the relationship. Subsequently the relationship between the current and the cutting force is identified, and it is presented that control of machined surface using the current of the feed motor at rest is possible.

  • PDF

Human Limbs Modeling from 3D Scan Data (3차원 스캔 데이터로부터의 인체 팔, 다리 형상 복원)

  • Hyeon, Dae-Eun;Yun, Seung-Hyeon;Kim, Myeong-Su
    • Journal of the Korea Computer Graphics Society
    • /
    • v.8 no.4
    • /
    • pp.1-7
    • /
    • 2002
  • This paper presents a new approach for modeling human limbs shape from 3D scan data. Based on the cylindrical structure of limbs, the overall shape is approximated with a set of ellipsoids through ellipsoid fitting and interpolation of fit-ellipsoids. Then, the smooth domain surface representing the coarse shape is generated as the envelope surface of ellipsoidal sweep, and the fine details are reconstructed by constructing parametric displacement function on the domain surface. For fast calculation, the envelope surface is approximated with ellipse sweep surface, and points on the reconstructed surface are mapped onto the corresponding ellipsoid. We demonstrate the effectiveness of our approach for skeleton-driven body deformation.

  • PDF

A General Description of Tool Surface Based on Finite Element Mesh and Its Application to 3-D Sheet Forming Processes (유한요소격자에 기초한 일반적인 금형면 묘사와 3차원 박판성형공정에의 응용)

  • Yun, Jeong-Hwan;Kim, Jong-Bong;Yang, Dong-Yeol;Kim, Seok-Gwan;Yu, Dong-Jin;Lee, Jae-Jin
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.24 no.3 s.174
    • /
    • pp.550-559
    • /
    • 2000
  • One of the most important factor to be considered for the analysis of sheet metal forming processes is the tool surface description for arbitrarily- shaped sheet metal parts. In the present study , finite element approach is used to describe the arbitrarily shaped tool surface. In finite element mesh approach, tool surfaces ar, described by finite elements. The finite elements mesh description of the tool surface, which is originally described by CAD data, needs much time and time-consuming graphic operation. The method, however, has been widely used to describe a complex tool surface. In the present study, the contact searching algorithm for the finite element mesh approach is developed based on cell strategy method and sheet surface normal scheme. For the verification purpose, a clover cup drawing, Baden-Baden oilpan problem and a trunk floor drawing were investigated. The computational results based on the finite element approach were compared with the results of available parametric patch approach and experiments.