• 대한토목학회논문집
• /
• 제41권6호
• /
• pp.663-673
• /
• 2021

해안구조물 설계시 허용평균월파량은 설계요소중의 하나이며, 구조물의 마루높이는 구조물의 안전, 보행자의 안전 및 운영 등에 요구되는 월파량 이하가 되도록 하여야 한다. 최근 들어 보다 안전한 설계를 위해 평균월파량보다 개별 최대월파량을 기준으로 적용하자는 제안이 이루어지고 있다. 본 연구는 비쇄파조건에서 개별 최대월파량에 대한 정보를 제공하고자 하는 것이며, 경사식구조물의 기하학적 형상을 고려안 2차원 수리모형실험을 수행하였다. 또한 실험을 위해 새로운 계측방법을 고안하였다. 실험결과를 이용하여 평균월파량에 기반하여 개별 최대월파량을 산정할 수 있는 경험식을 제안하였다. 그리고 피복재 어깨폭에 따른 평균월파량의 저감효과에 대해서도 검토하였다.

• Structural Monitoring and Maintenance
• /
• 제9권1호
• /
• pp.43-57
• /
• 2022

One of the instances which demand structural engineer's greatest attention and upgradation is the changing live load requirement in bridge design code. The challenge increases in developing countries as the pace of infrastructural growth is being catered by the respective country codes with bigger and heavier vehicles to be considered in the design. This paper presents the case study of India where Indian Roads Congress (IRC) codes in its revised version from 2014 to 2017 introduced massive Special vehicle (SV) around 40 m long and weighing 3850 kN to be considered in the design of road bridges. The code does not specify the minimum distance between successive special vehicles unlike other loading classes and hence the consequences of it form the motivation for this study. The effect of SV in comparison with Class 70R, Class AA, Class A, and Class B loading is studied based on the maximum bending moment with moving load applied in Autodesk Robot Structural Analysis. The spans considered in the analysis varied from 10 m to 1991 m corresponding to the span of Akashi Kaikyo Bridge (longest bridge span in the world). A total of 182 analyses for 7 types of vehicles (class B, class A, class 70R tracked, class 70R wheeled, class AA tracked, AA wheeled, and Special vehicle) on 26 different span lengths is carried out. The span corresponding to other vehicles which would equal the bending moment of a single SV is presented along with a comparison relative to Standard Uniformly Distributed Load. Further, the results are presented by introducing a new parameter named Intensity Factor which is proven to relate the effect of axle spacing of vehicle on the normalized bending moment developed.

• 한국전자통신학회논문지
• /
• 제17권2호
• /
• pp.245-254
• /
• 2022

본 논문에서는 항 재밍 GPS 안테나의 설계 최적화에 관하여 연구하였다. 이를 위해 항 재밍 성능 분석 기준 및 방법을 제시하였다. 제시된 방법을 적용하기 위한 안테나 시스템의 구조는 7개의 방사소자가 배열된 구조이다. 여기서 6개 방사소자는 원형 등각 배열되었으며, 나머지 1개 방사소자는 원형 중앙에 배치하였다. 제시된 기준 및 방법을 기반으로 상기 안테나를 최적화 하였으며, 최적화된 안테나의 설계 요소(원형 배열의 반지름)의 전기적 길이는 0.48 λ이다. 모의실험 결과, 주 빔의 조향각도(θ, ϕ)가 (0°, 0°)인 경우, 항 재밍을 위한 패턴 널 형성 범위(θ 기준)가 57°부터 90°가 됨을 확인하였다.

• 한국안전학회지
• /
• 제29권6호
• /
• pp.166-171
• /
• 2014

Nuclear power plants are equipped with the reactor trip system (RTS) and the engineered safety features actuation system (ESFAS) to improve safety on the normal operation. In the event of the design basis accident (DBA), a various of post accident monitor(PAM)systems support to provide important details (e.g. Containment pressure, temperature and pressure of reactor cooling system and core exit temperature) to determine action of main control room (MCR). Operator should be immediately activated for the accident mitigation with the information. Especially, core exit temperature is a critical parameter because the operating mode converts from normal mode to emergency mode when the temperature of core exit reaches $649^{\circ}C$. In this study, uncertainty which was caused by exterior environment, characteristic of thermocouple/connector and accuracy of calibrator/indicator was evaluated in accordance with ANSI-ISA 67.04. The square root of the sum of square (SRSS) methodology for combining uncertainty terms that are random and independent was used in the synthesis. Every uncertainty that may exist in the hardware which is used to measure the core exit temperature was conservatively applied and the associative relation between the elements of uncertainty was considered simultaneously. As a result of uncertainty evaluation, the channel statistical allowance (CSA) of single channel of core exit temperature was +1.042%Span. The range of uncertainty, -0.35%Span ($-4.05^{\circ}C$) ~ +2.08%Span($24.25^{\circ}C$), was obtained as the operating criteria of core exit temperature.

• 한국소음진동공학회논문집
• /
• 제22권9호
• /
• pp.853-860
• /
• 2012

This paper identifies a cause of pick up noise in a laser printer and a relationship between pick up noise and major components related to pick up noise. A pick up sound is affected by many components such as spring force, spring constant, and friction coefficient. Objective evaluation for the pick up sound is difficult because of back ground sound such as operating sound. Especially, a sound between a friction pad and a paper in the process of printing has become an essential issue in an aspect of quality evaluation. However the existing criteria for determining the above sound have solely relied on human's subjective judgments; which highlights the requirement to objectify these criteria. In this paper, the standard of existing pick up noise is established by finding the tonality, which is a psychoacoustic parameter, of noticeable limit sound level. Based on the findings of the method, the study has found factors which cause pick up noise and suggests the substitution of following components of printers such as spring constants, spring force, and the quality of friction pads. As a result, it is confirmed that the proposed pick up noise index has usefulness to classify whether existence of pick up noise with an objective evaluation and not to occur the noise based on design optimized combination of laser printer components.

• Geomechanics and Engineering
• /
• 제33권1호
• /
• pp.1-9
• /
• 2023

The unconfined compression strength (UCS) of soils is commonly used either before or during the construction of geo-structures. In the pre-design stage, UCS as a mechanical property is obtained through a laboratory test that requires cumbersome procedures and high costs from in-situ sampling and sample preparation. As an alternative way, the empirical model established from limited testing cases is used to economically estimate the UCS. However, many parameters affecting the 1D soil compression response hinder employing the traditional statistical analysis. In this study, gene expression programming (GEP) is adopted to develop a prediction model of UCS with common affecting soil properties. A total of 79 undisturbed soil samples are collected, of which 54 samples are utilized for the generation of a predictive model and 25 samples are used to validate the proposed model. Experimental studies are conducted to measure the unconfined compression strength and basic soil index properties. A performance assessment of the prediction model is carried out using statistical checks including the correlation coefficient (R), the root mean square error (RMSE), the mean absolute error (MAE), the relatively squared error (RSE), and external criteria checks. The prediction model has achieved excellent accuracy with values of R, RMSE, MAE, and RSE of 0.98, 10.01, 7.94, and 0.03, respectively for the training data and 0.92, 19.82, 14.56, and 0.15, respectively for the testing data. From the sensitivity analysis and parametric study, the liquid limit and fine content are found to be the most sensitive parameters whereas the sand content is the least critical parameter.

• 한국해안해양공학회지
• /
• 제13권4호
• /
• pp.319-326
• /
• 2001

본 논문에서는 경사형 방파제 설계시 최소 중량으로 외부 조건에 충분히 견딜 수 있는 사석 크기를 결정하는 방법을 제시한다. 기존의 방파제 설계에 있어 사석 중량 산정에 이용된 Iribarren, Hudson, Van der Meer 식 등은 단지 차원 해석에 의하여 파력이 중력과 파고의 곱에 비례하는 관계를 이용하였는데, 이번 연구에서는 파력이 파입자의 수표면 최대 속도와 밀접한 관계가 있음을 이용하였다. 또한 파고가 사석 중량 산정에 중요 요소인 것은 여러 논문을 통해서도 알 수 있는데, 이번 연구에서는 선형파 이론을 이용하여 새로운 매개 변수를 추출하였다. 이렇게 구한 경험식을 van der Meer 관측자료에 적용하여 경험계수 산정식을 결정하였다.

• 조명전기설비학회논문지
• /
• 제28권2호
• /
• pp.42-47
• /
• 2014

The urban railway station is a structure that consumes a large amount of electric energy. Thus, the rationalization of using electric power is acutely demanded, but statistical data and design criteria that consider operating power load characteristics and structures, are very insufficiency. Therefore, this study investigated and analyzed that electricity consumption a year, characteristics, gross floor area of the station, structure, and etc, on the basis of Seoul metro station 1~4 line. Through regression analysis theory, we verified the overall features and the main tendency by analysis of specific parameter value(average, maximum, minimum, etc). The object of this study is the analysis about power density considering structure of the urban railway station, managing electric energy for the rationalization and setting a new standard of maintenance and construction.

• Wind and Structures
• /
• 제9권3호
• /
• pp.217-230
• /
• 2006

This paper describes a procedure to develop fragility curves for woodframe structures subjected to lateral wind loads. The fragilities are cast in terms of horizontal displacement criteria (maximum drift at the top of the shearwalls). The procedure is illustrated through the development of fragility curves for one and two-story residential woodframe buildings in high wind regions. The structures were analyzed using a monotonic pushover analysis to develop the relationship between displacement and base shear. The base shear values were then transformed to equivalent nominal wind speeds using information on the geometry of the baseline buildings and the wind load equations (and associated parameters) in ASCE 7-02. Displacement vs. equivalent nominal wind speed curves were used to determine the critical wind direction, and Monte Carlo simulation was used along with wind load parameter statistics provided by Ellingwood and Tekie (1999) to construct displacement vs. wind speed curves. Wind speeds corresponding to a presumed limit displacement were used to construct fragility curves. Since the fragilities were fit well using a lognormal CDF and had similar logarithmic standard deviations (${\xi}$), a quick analysis to develop approximate fragilities is possible, and this also is illustrated. Finally, a compound fragility curve, defined as a weighted combination of individual fragilities, is developed.

• Smart Structures and Systems
• /
• 제6권1호
• /
• pp.1-16
• /
• 2010

This paper presents a novel smart MEMS accelerometer which employs a hybrid control algorithm and an estimator. This scheme is realized by adding a sliding-mode controller to a conventional PID closed loop system to achieve higher stability and higher dynamic range and to prevent pull-in phenomena by preventing finger displacement from passing a maximum preset value as well as adding an adaptive nonlinear observer to a conventional PID closed loop system. This estimator is used for online estimation of the parameter variations for MEMS accelerometers and gives the capability of self testing to the system. The analysis of convergence and resolution show that while the proposed control scheme satisfies these criteria it also keeps resolution performance better than what is normally obtained in conventional PID controllers. The performance of the proposed hybrid controller investigated here is validated by computer simulation.