• Safety and Health at Work
• /
• v.14 no.1
• /
• pp.107-117
• /
• 2023

Background: Thermophysiological comfort in a cold environment is mainly ensured by clothing. However, the thermal performance and protective abilities of textile fabrics may be sensitive to extreme environmental conditions. This article evaluated the thermal insulation properties of three technical textile assemblies and determined the influence of environmental parameters (temperature, humidity, and wind speed) on their insulation capacity. Methods: Thermal insulation capacity and air permeability of the assemblies were determined experimentally. A sweating-guarded hotplate apparatus, commonly called the "skin model," based on International Organization for Standardization (ISO) 11092 standard and simulating the heat transfer from the body surface to the environment through clothing material, was adopted for the thermal resistance measurements. Results: It was found that the assemblies lost about 85% of their thermal insulation with increasing wind speed from 0 to 16 km/h. Under certain conditions, values approaching 1 clo have been measured. On the other hand, the results showed that temperature variation in the range (-40℃, 30℃), as well as humidity ratio changes (5 g/kg, 20 g/kg), had a limited influence on the thermal insulation of the studied assemblies. Conclusion: The present study showed that the most important variable impacting the thermal performance and protective abilities of textile fabrics is the wind speed, a parameter not taken into account by ISO 11092.

• Journal of Distribution Science
• /
• v.11 no.8
• /
• pp.15-23
• /
• 2013

Purpose - This is a case study aimed at finding a solution for improving the pallet loading efficiency in the process of delivering products through a transshipment using the T-11 and T-12 pallet systems. The study proposes a solution by demonstrating the case of a certain manufacturer A, who aims to reduce the logistics cost by using packaging sizes that are commonly applicable and can improve the compatibility between the T-11 pallet system, designated as the standard pallet in Korea, and the T-12 pallet system, which is commonly used in other foreign countries. The use of common sizes increases compatibility among the two systems and reduces both logistics and environmental costs. Thus, this case study calculates the quantitative benefits of applying common packaging sizes to improve the compatibility between the T-11 and T-12 pallet systems. These systems are considered to be the most important and widely used transportation systems in the global logistics industry. Research design, data, and methodology - This study examined manufacturer A's representative product and delivery system and assessed how manufacturer A was affected by the use of incompatible packaging sizes in the T-11 (1100 mm×1100 mm) and T-12 (1200mm×1000 mm) pallet systems, which were specified in the KS T 1002 standard. In addition, this study analyzed the impact of these packaging sizes on A's logistics cost. The TOPS program (Total Packaging System) was used to simulate pallet loading efficiency,and the main parameter studied was volume, as calculated from length, width, and height. Results - When the sizes of secondary packaging were not compatible across the T-11 and T-12 pallet systems, a reduction in loading efficiency was observed, leading to an increase in logistics cost during transshipment. Such low loading efficiencies led to a further loss of efficiency in transportation, storage and unloading. This may have a possible environmental impact with high social expenses, such as increased CO₂ emissions. Hence, this study proposed that the KS T 1002 standard be amended to include 21 packaging sizes, including 7 sizes of the 600 mm×500 mm category, which are compatible with both the T-11 and T-12 pallet systems. Conclusions - This study found that the 69 standard sizes under the T-11 pallet system and the 40 standard sizes under the T-12 system in the KS T 1002 standard can be simplified and reduced to 21 mutually compatible packaging sizes, enabling logistics standardization and reducing national-level logistics costs. If the government pays attention to this study and considers the standardization of common sizes for the T-11 and T-12 pallet systems and amends the KS T 1002 standard, this study will deliver practical value to the global logistics industry, apart from being of academic significance.

• The Journal of the Korea Contents Association
• /
• v.20 no.4
• /
• pp.14-24
• /
• 2020

This paper aims to establish an efficient national R&D Application Programming Interface (API) management system for national R&D data-driven management and explore the possibility of using operational data according to the recent global data openness and sharing policy. In accordance with the trend of opening and sharing of national R&D data, we plan to improve management efficiency by analyzing operational data of the national R&D API service. For this purpose, we standardized the parameters for the national R&D APIs that were distributed separately by integrating the individual APIs to build a national R&D API management system. The results of this study revealed that the service call traffic of the national R&D API has shown 554.5% growth in the year as compared to the year 2015 when the measurement started. In addition, this paper also evaluations the possibility of using operational data through data preparation, analysis, and prediction based on service operations management data in the actual operation of national R&D integrated API management system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.8
• /
• pp.1513-1526
• /
• 2009

The SVC (Scalable Video Coding) scheme can be effectively used for reducing the redundancy and for improving the coding efficiency but, it requires very high computational complexities. In order to accelerate the successful standardization and commercialization of the Advanced Terrestrial-DMB service, it is necessary to overcome this problem. For this aim, in this paper, we propose an efficient aggregated encoder control algorithm, which shows better performances than the conventional control scheme. Computer simulation result shows that the proposed scheme performs about up to 0.3dB better than those of the conventional scheme. Additionally, based on this control scheme, we propose a fast mode decision method by constraining the redundant coding modes based on the statistical properties of the quantization parameter in the spatial scalable encoder. Through computer simulations, it is shown that the proposed control schemes reduce the heavy computational burden up to 12% compared to the conventional scheme, while keeping the objective visual qualify very high.

• Fashion & Textile Research Journal
• /
• v.14 no.3
• /
• pp.454-464
• /
• 2012

In this study, fitness tests for slacks were divided into shape fitness test and motion fitness test, and the fitness test conditions for slacks were designed as the first step for standardization of measuring scales. Shape fitness test consisted of analyzing the parameters of appearance sensory tests as described in preceding studies, performing a simulated appearance sensory test, collecting and considering apparel experts' opinions about the test parameters, and establishing test conditions in terms of test regions, descriptions and faces. For the regions of the abdomen, hip, crotch, thighs, and knees, the parameter of unnecessary wrinkle/stretch was observed from the anterior and posterior body, and then evaluated; for waist, hip, crotch, knee and hem circumference, the parameters of ease and horizontality were observed from the anterior body and posterior body followed by evaluation; and, at the levels of waist, hip, crotch, knee and hem circumference, the division of the lateral line were observed from the lateral body followed by evaluation. Motion fitness test was composed of reviewing and analyzing comparatively the methods of motion fitness tests as mentioned in preceding studies, and establishing test conditions in terms of test motions and test regions. For each of the waist, abdomen, hip, crotch, and knees, wear sensation was tested in the positions as follows: upright standing, moderate walking, chairsitting, bending forward to the maximum, and kneeling down, provided that as the measured points of garment pressure, anterior waist, abdominal protrusion, buttock protrusion, crotch, and midpatella were set and tested.

• Tunnel and Underground Space
• /
• v.24 no.4
• /
• pp.325-333
• /
• 2014

Hydraulic fracturing is the key technology for production of shale gas, which is one of the major unconventional resources. Brittleness index is one of the most important mechanical properties which determine the efficiency of hydraulic fracturing. It was required that the production of shale gas increases with more brittle behavior. Confusingly, there are numerous definitions available for brittleness of rock. This paper summarizes various definitions of brittleness index, and presents correlation analysis of the brittleness indices by using the laboratory experimental results of 48 shale specimens in Korea. Generally, it shows a very weak positive correlation between the brittleness index ($B_1$) which is the ratio of uniaxial compressive strength to tensile strength and the brittleness index ($B_3$) which is calculated by using the Youngs modulus and Poisson's ratio. In addition, the role of Poissons ratio is not clear in defining brittleness indices. In conclusion, standardization of definition for brittleness index is required to apply it to hydraulic fracturing as a parameter for predicting the efficiency.

• Journal of Korean Society for Quality Management
• /
• v.48 no.1
• /
• pp.51-68
• /
• 2020

Purpose: The primary objective of this research is to develop the optimal operating conditions as well as their associated design spaces for a Cryogenic Submerged Arc Welding(SAW) process by improving its quality and productivity simultaneously. Methods: In order to investigate functional relationships among quality characteristics and their associated control factors of an SAW process, a stepwise design of experiment(DoE) method is proposed in this paper. Based on the DoE results, not only a multi-dimensional design space but also a safe operating space and normal acceptable range(NAR) by integrating statistical confidence intervals were demonstrated. In addition, the optimal operating conditions within the proposed NAR can be obtained by a robust optimal design method. Results: This study provides a customized stepwise DoE method (i.e., a sequential set of DoE such as a factorial design and a central composite design) for Cryogenic SAW process and its statistical analysis results. DoE results can then provide both the main and interaction effects of input control factors and the functional relationships between the input factors and their associated output responses. Maximizing both the product quality with high impact strength and the productivity with minimum processing times simultaneously in a case study, we proposed a design space which can provide both acceptable productivity and quality levels and NARs of input control factors. In order to confirm the optimal factor settings and the proposed NARs, validation experiments were performed. Conclusion: This research may provide significant contributions and applications to many SAW problems by preparing a standardization of the functional relationship between the input factors and their associated output response. Moreover, the proposed design space based on DoE and NAR methods can simultaneously consider a number of quality characteristics including tradeoff between productivity and quality levels.

• Korea Information Processing Society Review
• /
• v.15 no.2
• /
• pp.15-28
• /
• 2008

The Korea UK e-Science Collaboration project has been aimed at supporting research and collaboration between Korean and UK researchers. Its goal is to benefit the nation by reducing cost and time in constructing the National e-Science Research Environment' by studying and benchmarking the cases in countries that have already procured advanced technologies in the area. Two joint workshops were held in a year where researchers from the two countries had the opportunities to share their research results with each other. Also, the project has supported exchanges of researchers fostering expertise in the field. In the course of the project, the e-Science Centre in the UK and KISTI have signed MoU(Memorandum of Understanding) in 2006. Moreover, there have been active research collaboration between Korea and the UK. The University of Southampton will share the BioSimGrid data with the Korean counterpart, and the University of York has provided the AURA software. In the future, KISTI and the UK NGS(National Grid Service) will organize a working group at OGF that will work mainly on the standardization of Parameter Sweep and bring it to lead the global standard. KISTI will include its own AURORA system into OMI-UK software stack, which will enable access to NGS resources through AURORA user application. The collaboration with the UK has opened up more opportunities for collaboration with other countries as well. KISTI and HLRS in Germany have agreed to share the COVISE and will have research exchanges. As such, it is expected that Korea will play a major role in e-Science research by building strategic and systematic collaborative relations with its International partners.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.1
• /
• pp.155-165
• /
• 2012

This essay talks about research of robust design for quality improvement of production procedure of Wet Etchant. It suggested the optimum design method in consideration of specific capability value that is the way to maximize the quality of product in the production system by using Daguchi parameter design method while finding factors affecting product quality with analysis of production system of product A from producer D. Also, it set long term of 6months as noise factor and let it to be the robust design that can find the optimum condition of control factor that is dull to the changes of each month, that is the change in noise factor. The control factor which affects the product quality is decided as combination method, temperature of raw material, combination time and as there are too many possibilities for combination methods, we performed 4 methods first based on previous research data then derived three ways with product that passed SPEC and set as the factor. As a result of application of optimum production procedure suggested in this essay to the actual production process with its standardization, there was a effect of drop of more than 10particles in comparison to the particle number of previous product and also it brought the effect that resulted the stable number of particle of under 30 that is what the client company suggested.

• CELLMED
• /
• v.11 no.3
• /
• pp.14.1-14.9
• /
• 2021

Background: Cuscuta reflexa Roxb is a member of the Cuscutaceae family, and in Unani medicine, it is known as Aftimoon. It is a parasitic plant that can be found growing abundantly on various host plants in India up to 3000 metres in altitude during the rainy season. Unani physicians have been using it for years to cure a variety of illnesses, including psychiatric illnesses like melancholia, schizophrenia, and epilepsy. It has been used to cure hepatitis, palpitations, and skin disorders, among other things. Objective of the study: To evaluate anti-anxiety effect of Cuscuta reflexa Roxb in Swiss Albino mice of either sex. Materials and Methods: A total of 24 Swiss Albino mice weighing 25-35 g were used in this study. Animals were chosen at random and held in their cages for at least 7 days in a standard setting. Group A was given regular saline as a vehicle, Group B was given a hydro alcoholic extract of the lower dose of the test drug, Group C was given a hydro alcoholic extract of the higher dose of the test drug, and Group D was given the standard drug Diazepam 5 mg/kg orally. Aftimoon as hydro alcoholic extract (200 mg/kg and 400 mg/kg body wt.) was given in single and double doses and observed for 7 days. Results: For each parameter in each category, mean and standard deviations were computed. For multiple group comparisons, a one-way ANOVA was used, followed by Turkey's post hoc test. (p<0.05) was used as the significance standard. Conclusion: These results advocate that the Aftimoon as double dose (400 mg/kg body wt.) revealed anti-anxiety effect similar to standard drug.