• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.493-495
• /
• 1998

Robust design is one method to make manufacturing less sensitive to manufacturing process. Also it is cost effective technique to improve the quality process. This method uses statistically planned experiments to vary settings of important process control parameters. In this paper we apply fuzzy optimization and fuzzy logic system to robust design concept. First a method which uses fuzzy optimization in obtaining optimum settings by measured data from experiments will be presented. Second, fuzzy logic system is made to reduce experiments using experiments results consisted with key control parameter combinations. Then optimum parameter set points are obtained by the descrebed first fuzzy optimization method after prediction the results of each parameter combinations considering each control parameter variations by nonsingleton fuzzy logic system concept.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.4
• /
• pp.60-65
• /
• 2002

In order to generate hull form, we introduced optimization process. Fairness criteria is applied to object function, B-Spline control vertices are considered as design variables, optimization is proceeded with satisfying geometric constraint conditions. GA(Genetic Algorithm) and optimality criteria are applied to optimization process in this study.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.99.6-99
• /
• 2001

The parameter optimization for agile beam radar tracking is addressed to minimize the radar resources that are required to maintain a target under track. The parameters to be optimized include the track-revisit interval and the sequence of pairs of target signal strengths and detection thresholds associated with repeated illumination attempts in each track-revisit. The optimization problem is solved numerically for typical examples.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.8
• /
• pp.64-70
• /
• 1997

This paper presents a parameter optimization method using evolutionary programming in voltage reference circuit because the designer must select appropriate parameter values of the circuit taking into consideration both powr voltage and temperature variation. In this paper, evolutionary programming is suggested as an approach for finding good parameters with which the reference voltage variation is small with respect to temperature variation. Simulation results. Simulation results show that this method is effective in circuit design.

• Journal of Power Electronics
• /
• v.14 no.1
• /
• pp.165-174
• /
• 2014

The cascaded H-Bridge Dynamic Voltage Restorer (DVR) is used for protecting high voltage and large capacity loads from voltage sags. The LC filter in the DVR is needed to eliminate switching ripples, which also provides an accurate tracking feature in a certain frequency range. Therefore, the parameter optimization of the LC filter is especially important. In this paper, the value range functions for the inductance and capacitance in LC filters are discussed. Then, parameter variations under different conditions of voltage sags and power factors are analyzed. In addition, an optimized design method is also proposed with the consideration of multiple impact factors. A detailed optimization procedure is presented, and its validity is demonstrated by simulation and experimental results. Both results show that the proposed method can improve the LC filter design for a cascaded H-Bridge DVR and enhance the performance of the whole system.

• Advances in Computational Design
• /
• v.2 no.3
• /
• pp.241-256
• /
• 2017

This paper introduces the process for Multi-objective Optimization Framework (MOF) which mediates multiple conflicting design targets. Even though the extensive researches have shown the benefits of optimization in engineering and design disciplines, most optimizations have been limited to the performance-related targets or the single-objective optimization which seek optimum solution within one design parameter. In design practice, however, designers should consider the multiple parameters whose resultant purposes are conflicting. The MOF is a BIM-integrated and simulation-based parametric workflow capable of optimizing the configuration of building components by using performance and non-performance driven measure to satisfy requirements including build programs, climate-based daylighting, occupant's experience, construction cost and etc. The MOF will generate, evaluate all different possible configurations within the predefined each parameter, present the most optimized set of solution, and then feed BIM environment to minimize data loss across software platform. This paper illustrates how Multi-objective optimization methodology can be utilized in design practice by integrating advanced simulation, optimization algorithm and BIM.

• Industrial Engineering and Management Systems
• /
• v.6 no.2
• /
• pp.119-124
• /
• 2007

The most difficult and time-intensive issue in the successful implementation of genetic algorithms is to find good parameter setting, one of the most popular subjects of current research in genetic algorithms. In this study, we present a new efficient experimental design method for parameter optimization in a genetic algorithm for general job shop scheduling problem using the Taguchi method. Four genetic parameters including the population size, the crossover rate, the mutation rate, and the stopping condition are treated as design factors. For the performance characteristic, makespan is adopted. The number of jobs, the number of operations required to be processed in each job, and the number of machines are considered as noise factors in generating various job shop environments. A robust design experiment with inner and outer orthogonal arrays is conducted by computer simulation, and the optimal parameter setting is presented which consists of a combination of the level of each design factor. The validity of the optimal parameter setting is investigated by comparing its SN ratios with those obtained by an experiment with full factorial designs.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.9
• /
• pp.1314-1319
• /
• 2004

In this study, parameter optimization of micro-static mixer with a cantilever beam was accomplished for maximizing the mixing efficiency by using successive response surface approximations. Variables were chosen as the length of cantilever beam and the angle between horizontal and the cantilever beam. Sequential approximate optimization method was used to deal with both highly nonlinear and non-smooth characteristics of flow field in a micro-static mixer. Shape optimization problem of a micro-static mixer can be divided into a series of simple subproblems. Approximation to solve the subproblems was performed by response surface approximation, which does not require the sensitivity analysis. To verify the reliability of approximated objective function and the accuracy of it, ANOVA analysis and variables selection method were implemented, respectively. It was verified that successive response surface approximation worked very well and the mixing efficiency was improved very much comparing with the initial shape of a micro-static mixer.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.5
• /
• pp.29-35
• /
• 2004

A new approach, referred to as a successive zooming genetic algorithm (SZGA), is proposed for identifying a global solution, using continuous zooming factors for optimization problems. In order to improve the local fine-tuning of the GA, we introduced a new method whereby the search space is zoomed around the design variable with the best fitness per 100 generation, resulting in an improvement of the convergence. Furthermore, the reliability of the optimized solution is determined based on the theory of probability, and the parameter used for the successive zooming method is optimized. With parameter optimization, we can eliminate the time allocated for deciding parameters used in SZGA. To demonstrate the superiority of the proposed theory, we tested for the minimization of a multiple function, as well as simple functions. After testing, we applied the parameter optimization to a truss problem and wicket gate servomotor optimization. Then, the proposed algorithm identifies a more exact optimum value than the standard genetic algorithm.

• Journal of Korean Society for Quality Management
• /
• v.30 no.4
• /
• pp.58-67
• /
• 2002

Since the inception of off-line quality control, it has drawn a particular attention from research community and it has been implemented in a wide variety of industries mainly due to its extensive applicability to numerous real situations. Emphasizing design issues rather than control issues related to manufacturing processes, off-line quality control has been recognized as a cost-effective approach to quality improvement. It mainly consists of three design stages: system design, parameter design, and tolerance design which are implemented in a sequential manner. Utilizing experimental designs and optimization techniques, off-line quality control is aimed at achieving product performance insensitive to external noises by reducing process variability. In spite of its conceptual soundness and practical significance, however, off-line quality control has also been criticized to a great extent due to its heuristic nature of investigation. In addition, it has also been pointed out that the process optimization procedures are inefficient. To enhance the current practice of off-line quality control, this study proposes an integrated optimization model by utilizing a well-established statistical tool, so called response surface methodology (RSM), and a tolerance - cost relationship.