• 전자공학회논문지SC
• /
• 제38권2호
• /
• pp.20-30
• /
• 2001

본 논문에서는 신경회로망 기반의 다중 모델을 이용한 예측제어 방법에 간하여 기술한다. 플랜트의 특정한 피라미터 값들에 대해 다중의 모델을 구성하고, 이들 중 현재 시간에서 최적의 예측 값을 제공하는 모델을 스위칭 기법으로 선택한다. 선택된 모델의 예측 값을 기반으로 비선형 프로그래밍 방법으로 현재 시간에서의 제어 입력 값을 구하여 예측제어를 수행한다. 제안한 방법을 시간지연 값이 변하거나 매개변수 값이 가변하는 시스템에 적용하여 그 유용성을 보이고, 부하가 변동하는 자기부상열차 시스템의 부상제어에 이용한 모의 실험 결과를 보인다.

• 전기학회논문지
• /
• 제57권5호
• /
• pp.858-865
• /
• 2008

In this paper, Capacitive Telemetry RF Sensor System using Recursive Least Square (RLS) algorithm was proposed. General Telemetry RF Sensor System means that it should be "wireless", "implantable" and "batterless". Conventional Telemetry RF Sensor System adopts Integrated Circuit type, but there are many defects like complexity of structure and the limitation of large power consumption in some cases. In order to overcome these disadvantages, Telemetry RF Sensor System based on inductive coupling principle was proposed in this paper. Proposed Telemetry RF Sensor System is very simple because it consists of R, L and C and measures the changes of environment like pressure and humidity in the type of capacitive value. This system adopted RLS algorithm for estimation of this capacitive parameter. For the purpose of applying RLS algorithm, proposed system was mathematically modelled with phasor method and was quasi-linearized. As two parameters such as phase and amplitude of output voltage for estimation were needed, Phase Difference Detector and Amplitude Detector were proposed respectively which were implemented using TMS320C2812 made by Texas Instrument. Finally, It is verified that the capacitance of proposed telemetry RF Sensor System using RLS algorithm can be estimated efficiently under noisy environment.

• Journal of applied mathematics & informatics
• /
• 제35권3_4호
• /
• pp.241-260
• /
• 2017

An analysis is made to study the solute transport in a Casson fluid flow through an annulus in presence of oscillatory flow field and determine how this flow influence the solute dispersion along the annular region. Axial dispersion coefficient and the mean concentration expressions are calculated using the generalized dispersion model. Dispersion coefficient in oscillatory flow is found to be a function of frequency parameter, Schmidt number, and the pressure fluctuation component besides its dependency on yield stress of the fluid, annular gap and time in the case of steady flow. Due to the oscillatory nature of the flow, the dispersion coefficient changes cyclically and the amplitude and magnitude of the dispersion increases initially with time and reaches a non - transient state after a certain critical time. This critical value varies with frequency parameter and independent of the other parameters. It is found that the presence of inner cylinder and increase in the size of the inner cylinder inhibits the dispersion process. This model may be used in understanding the dispersion phenomenon in cardiovascular flows and in particular in catheterized arteries.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.433-439
• /
• 2000

Lots of semi-active control devices have been developed in recent years because they have the best features of passive and active system. Especially, controllable magneto-rheological(MR) fluid devices have received significant attention in these area of research. The MR fluid is the material that reversibly changes from a free-flowing, linear viscous fluid to a semisolid with a controllable yield strength in milliseconds when exposed to a magnetic field. If the magnetic field is induced by moving a permanent magnet instead of applying current to a solenoid, it is possible to design a MR damper consuming low power because the power consumption is reduced at steady state. This paper proposes valve mode MR damper using permanent magnetic circuit that has wide range of operation with low power consumption and small size. To design a MR damper that has a large maximum dissipating torque and a low damping coefficient, a design parameter is adopted. The magnetic circuit, material of choke and choke type are selected experimentally with the design parameter. The behaviors of the damper are examined and torque tracking control using PID feedback controller is performed for step, ramp and sinusoidal trajectories.

• 대한공간정보학회지
• /
• 제12권3호
• /
• pp.43-50
• /
• 2004

본 연구에서 교통수요 예측기법 중 통행량 분포기법의 이론적 배경에 대하여 광주광역시를 중심으로 컴퓨터 시뮬레이션을 통하여 분석 평가하고 모형에 내재되어 있는 매개변수의 특성변화를 연구하여 통행량 분포모형의 적용 타당성을 찾고자 하는데 연구의 목적이 있다. 본 연구에서는 통행분포모형의 정립을 목적으로 광주시의 20개 대존 중에서 도심지역에 해당되는 9개 존을 중심으로 한 통행목적별, 수단별, 출발 도착통행량 모형을 정립하였다. 여기에서는 기준 년도를 1996년으로 하고 2001년까지의 통행량을 분석하고 2008년도까지의 통행분포량을 예측하였다.

• 한국유체기계학회 논문집
• /
• 제15권6호
• /
• pp.39-45
• /
• 2012

This paper describes the outcome of the design of a 200 kW class micro gas turbine and the sensitivity of its performance (efficiency and power) to the variations in major design parameters. The reference design parameters were set up based on the best available component technologies. The resulting net electricity generation efficiency of the micro gas turbine package was found to be competitive to those of other systems in the market. The sensitivities of power and efficiency to the variations in compressor and turbine efficiencies, pressure ratio, turbine inlet temperature, recuperator effectiveness, secondary air ratio, pressure loss ratios of both the cold and hot sides of the recuperator were estimated. Based on the sensitivity data, a simplified method to predict the variation in system performance responding to the combinations of small changes in all design parameters were set up and validated.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.145-145
• /
• 2011

Recently, multi-hole electrode RF capacitively coupled plasma discharge is being used in the deposition of microcrystalline silicon for thin film solar cell to increase the speed of deposition. To make efficient multi-hole electrode RF capacitively coupled plasma discharge, the hole diameter is to be designed concerning the plasma parameters. In past studies, the relationship between plasma parameters such as pressures and gas species, and hole diameter for efficient plasma density enhancement is experimentally shown. In the presentation, the relationship between plasma deriving frequency and hole diameter for efficient multi-hole electrode RF capacitively coupled plasma discharge is shown. In usual capacitively coupled plasma discharge, plasma parameter, such as plasma density, plasma impedence and plasma temperature, change as frequency increases. Because of the change, the optimum hole diameter of the multi-hole electrode RF capacitively coupled plasma for high density plasma is thought to be modified when the plasma deriving frequency changes. To see the frequency effect on the multi-hole RF capacitively coupled plasma is discharged and one of its electrode is changed from a plane electrode to a variety of multi-hole electrodes with different hole diameters. The discharge is derived by RF power source with various frequency and the plasma parameter is measured with RF compensated single Langmuir probe. The shrinkage of the hole diameter for efficient discharge is observed as the plasma deriving frequency increases.

• 수면정신생리
• /
• 제3권1호
• /
• pp.31-37
• /
• 1996

Uvulopalatopharyngoplasty(UPPP) is an operation that is frequently performed for the patient of obstructive sleep apnea(OSA). A major problem has been to select those patients who will have a good response to UPPP. We compared preoperative and postoperative polysomnography(PSG) in 20 patients to evaluate the success rate of the operation. Each subject underwent a cephalometric roentgenogram, and fiberoptic nasopharyngoscopy with Mueller maneuver was applied in roentgenogram and fiberoptic nasopharyngoscopy with Mueller maneuver was applied in preop evaluation of patients with OSA. No PSG parameter could accurately predict the changes in sleep after UPPP. There were no significant differences between the responders and the nonresponders concerning the cephalometric analysis, the type of obstruction by Mueller maneuver, and body mass index(BMI). The conclusions of this study are thus that UPPP is an effective treatment for the OSAS with a high success rate, but that there is no single useful parameter predicting the success of the operation.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제7권1호
• /
• pp.31-43
• /
• 2007

The function of O-ring seals is to prevent leakage during the service life of the components in which they are installed. The life prediction of O-ring is very important at various industry fields. Generally, to evaluated the long-term performance of O-ring in severe environments has applied a life prediction technique based on accelerated life test (ALT). In this work, Accelerated thermal aging test(l20, 130, 140, $150^{\circ}C$) of O-ring was applied for life prediction of O-ring. The property changes after thermal aging test was measured using TGA, DSC, FT - IR, Video Microscope and SEM. Shape parameter and life prediction were obtained using MINITAB program.

• Nuclear Engineering and Technology
• /
• 제50권1호
• /
• pp.97-106
• /
• 2018

Improved load-following capability is one of the most important technical tasks of a pressurized water reactor. Controlling the nuclear reactor core during load-following operation leads to some difficulties. These difficulties mainly arise from nuclear reactor core limitations in local power peaking: the core is subjected to sharp and large variation of local power density during transients. Axial offset (AO) is the parameter usually used to represent the core power peaking. One of the important local power peaking components in nuclear reactors is axial power peaking, which continuously changes. The main challenge of nuclear reactor control during load-following operation is to maintain the AO within acceptable limits, at a certain reference target value. This article proposes a new robust approach to AO control of pressurized water reactors during load-following operation. This method uses robust feedback-linearization control based on the multipoint kinetics reactor model (neutronic and thermal-hydraulic). In this model, the reactor core is divided into four nodes along the reactor axis. Simulation results show that this method improves the reactor load-following capability in the presence of parameter uncertainty and disturbances and can use optimum control rod groups to maneuver with variable overlapping.