• Journal of Nutrition and Health
• /
• v.28 no.8
• /
• pp.759-770
• /
• 1995

This study was conducted to investigate the effect of weight control by use of commercial formula diet and nutrition education on 36 obese women over a period of 6 months. During the study it motivated ways for women to control their weight and improve their health, thus analyzing variables that influence weight control. To help weight control, for the first 3 weeks, along with 1 regular mea, 2-3 liquid formula diets of 135㎉ per pack a day were provided within the 1,200-800㎉ range. For 6 months since then, all 3 meals were taken regularly and it was recommended that energy which is 500㎉ less than energy requirement be taken. To evaluate the effect of weight change by the weight control program, anthropometric measurements, biochemicl parameter, and food behavior are measured. The mean body mass index(BMI) was 30.1$\pm$3.8(25.0-43.6) and it was in the upper 5 percentile of the mean BMI of Korean women. The percent of body fat was significantly reduced from 29.1$\pm$2.4 to 26.4$\pm$2.3, showing that the weight control program induced not only a change in weight but also a change in body composition. The body circumference such as waist and hip circumference and skinfold thickness measurements of biceps, triceps, subscapular and surprailiac were reduced significantly, but the mean waist-to-hip ratio didn't change. Singnificantly improved food behavior score measured by the questionnaire indicated that the weight-contorl program induced the change of the food behavior, as well. Weight loss also induced biochemical parameters of the subject, thus total cholesterol, LDL-Cholesterol, and triglycerol which were in the high range of the normal values were reduced to 20.2%(p<0.01), 22.2%(p<0.01), 25.8%(p<0.01), repectively. HDL-cholesterol didn't change significantly, but the ratio of HDL to total cholesterol increased(p<0.01).

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.1
• /
• pp.26-31
• /
• 2018

Objective: This study estimated the genetic parameters for body weight gain and growth curve parameter traits in Korean native chicken (KNC). Methods: A total of 585 $F_1$ chickens were used along with 88 of their $F_0$ birds. Body weights were measured every 2 weeks from hatching to 20 weeks of age to measure weight gain at 2-week intervals. For each individual, a logistic growth curve model was fitted to the longitudinal growth dataset to obtain three growth curve parameters (${\alpha}$, asymptotic final body weight; ${\beta}$, inflection point; and ${\gamma}$, constant scale that was proportional to the overall growth rate). Genetic parameters were estimated based on the linear-mixed model using a restricted maximum likelihood method. Results: Heritability estimates of body weight gain traits were low to high (0.057 to 0.458). Heritability estimates for ${\alpha}$, ${\beta}$, and ${\gamma}$ were $0.211{\pm}0.08$, $0.249{\pm}0.09$, and $0.095{\pm}0.06$, respectively. Both genetic and phenotypic correlations between weight gain traits ranged from -0.527 to 0.993. Genetic and phenotypic correlation between the growth curve parameters and weight gain traits ranged from -0.968 to 0.987. Conclusion: Based on the results of this study population, we suggest that the KNC could be used for selective breeding between 6 and 8 weeks of age to enhance the overall genetic improvement of growth traits. After validation of these results in independent studies, these findings will be useful for further optimization of breeding programs for KNC.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.2
• /
• pp.137-143
• /
• 2008

Rapid canopy closure (RCC) is one of the physiological attributes that may enhance genetic yield potential of rice (Oryza sativa L.) in a growing season. Crop growth before canopy closure could be described by an exponential equation of $y\;=\;{\alpha}{\cdot}{\exp}({\beta}{\cdot}t)$ where $\alpha$ is the crop leaf area index (LAI) or shoot dry weight (DW), t is the thermal time, $\beta$ is the LAI or DW at the beginning of the exponential growth and is the relative growth rate of LAI ($m^2m^{-2}^{\circ}C^{-1}$) or DW($gg^{-2}^{\circ}C^{-1}$). Field experiment using 22 cultivars revealed that the exponential growth phase before canopy closure can be divided into two sections; an earlier section during which crop dry weight and LAI of varieties are highly dependent on $\alpha$ and a second section where crop dry weight and LAI are highly dependent on $\beta$. Grain weight had significantly positive correlation with $\alpha$ parameter and dry weight and LAI during early exponential phase. The parameter $\beta$ of the exponential growth curve had positive and significant correlation with the LAI and dry weight during the late exponential growth phase, grain number per unit area, and grain yield. There was genotypic difference for RCC parameters, $\alpha$ and $\beta$, indicating the possibility of genetic improvement for these traits.

• Journal of Embryo Transfer
• /
• v.27 no.2
• /
• pp.81-85
• /
• 2012

This study investigated the effect of birth weight on the fertility of Holstein heifers. Growth parameter (body weight) was measured at birth. Calves were analyzed as three subgroups: low (L), average (A) and high (H) birth weight (BW) calves. LBW calves were born 10 kg lighter than HBW calves. Fertility data collected included age at first breeding (AFB), number of services per conception, pregnancy rate to first artificial insemination (AI), and age at first calving (AFC). Primiparous calves in HBW are smaller compared to multiparous cows (18.3% versus 48%). Although not significantly different, LBW offspring appeared to breed faster over the service period compared with the ABW offspring that bred three weeks later on the average. The mean pregnancy rate to first AI for LBW heifers was higher (60%) than ABW (48%) and HBW (45%). HBW cows required more services per conception (2.1) than the LBW (1.7) and ABW (1.9). There were significant differences (p<0.05) in age at first calving among the different calving birth weights. Smaller birth size did not have any subsequent adverse effects on fertility. HBW offspring were more likely or tend to have worse fertility parameters.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.96-101
• /
• 2007

A new metallic sandwich panel with a quasi-Kagome truss core subjected to bending load has been analyzed. First, equations of the failure loads corresponding to the eight failure modes are presented. Then, non-dimensional forms of the equations are derived as functions of three geometric variables, one material parameter (yield strain), one load index and one weight index. Failure maps are presented for a given weight index. By using the dimensionless forms of equations as the design constraints, two kinds of optimization are performed. One is based on the weight, that is, the objective function, namely, the dimensionless load is to be maximized for a given weight. Another is based on the load, that is, the dimensionless weight is to be minimized for a given load. The results of the two optimization processes are found to agree each other. The optimized geometric variables are derived as a function of given weights or failure loads. The performance of the quasi-Kagome truss as the core of a sandwich panel is evaluated by comparison with those of honeycomb cored and octet truss cored panels

• KSBB Journal
• /
• v.31 no.4
• /
• pp.291-299
• /
• 2016

In this study, Indomethacin, the poorly water soluble drug, was selected and prepared dispersing oral disintegrating films according to the molecular weight of polyethylene glycol (PEG) which are sort of dispersing agents. Also the molecular weight and content of PEG were evaluated effect on the degree of dispersion, physical property and dissolution when making oral dispersing film containing indomethacin to find appropriate condition and suggested guidelines of making oral dispersing film. The appropriate dispersing ratio of the amount of surfactants and dispersing agent were 1% and 4%, also the stability dropped in the PEG molecular weight of 4000 or more. Drying time of oral dispersing film was $90^{\circ}C$ for 10 minutes to 12 minutes that dispersing film's property about flexibility, detachability were very good. The oral dispersion film's content used PEG 400 was $98.6{\pm}0.5%$ and the most uniform. As the molecular weight of PEG increased, dissolution time also increased. On the basis of evaluation parameter, PEG with 400~600 of molecular weight was selected as good dispersing agent in oral dispersing film. Therefore, it can be suggested guideline of preparation application study in oral dispersing film.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.9
• /
• pp.943-950
• /
• 2007

A new metallic sandwich panel with a quasi-Kagome truss core subjected to bending load has been analyzed. First, equations of the failure loads corresponding to the eight failure modes are presented. Then, non-dimensional forms of the equations are derived as functions of three geometric variables, one material parameter (yield strain), one load index and one weight index. Failure maps are presented for a given weight index. By using the dimensionless forms of equations as the design constraints, two kinds of optimization are performed. One is based on the weight, that is, the objective function, namely, the dimensionless load is to be maximized for a given weight. Another is based on the load, that is, the dimensionless weight is to be minimized for a given load. The results of the two optimization processes are found to agree each other. The optimized geometric variables are derived as a function of given weights or failure loads. The performance of the quasi-Kagome truss as the core of a sandwich panel is evaluated by comparison with those of honeycomb cored and octet truss cored panels.

• Earthquakes and Structures
• /
• v.17 no.6
• /
• pp.567-575
• /
• 2019

In order to investigate the dynamic impact resistance of steel fiber reinforced full light-weight concretes, we implemented drop weight impact test on a total of 6 reinforced beams with 0, 1 and 2%, steel fiber volume fraction. The purpose of this test was to determine the failure modes of beams under different impact energies. Then, we compared and analyzed the time-history curves of impact force, midspan displacement and reinforcement strain. The obtained results indicated that the deformations of samples and their steel fibers were proportional to impact energy, impact force, and impact time. Within reasonable ranges of parameter values, the effects of impact size and impact time were similar for all volumetric contents of steel fibers, but they significantly affected the crack propagation mechanism and damage characteristics of samples. Increase of the volumetric contents of steel fibers not only effectively reduced the midspan displacement and reinforcement strain of concrete samples, but also inhibited crack initiation and propagation such that cracks were concentrated in the midspan areas of beams and the frequency of cracks at supports was reduced. As a result, the tensile strength and impact resistance of full light-weight concrete beams were significantly improved.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.4
• /
• pp.53-61
• /
• 1994

An experimental study on heat pump cycle systematizing characteristics for non-azeotropic refrigerant mixtures of R-22+R-114 was reported. Data were obtained under steady state condition at the ranges of parameters, 550- 2, 170kcal/h, 670-2, 990kcal/h, 24-71kg/h, and 0-1, for as cooling capacity, heating capacity, mass 25, 50, 75, and 100 per cent of R-22 by weight fraction for R-22+R-114 mixtures. The results shown that the C.O.P of the 50wt% of R-22 mixture was considerably larger than for pure R-22 and other weight fraction of R-22 mixtures, but the compression power of the 25wt% of R-22 was lower than that of the pure R-22 and the other weight fraction of R-22 mixtures. The hightest value of cooling capacity was obtained at the conditions of evaporating temperature 5.deg.C and R-22 50wt% mixture. In general, with an increase in the R-22 weight fraction for fixed values of the other parameter, the cooling capacity increased at first, obtained a maximum, and then decreasd. This verified the importance of accurate weight fractions od refrigerant mixtures in the heat pump cycle.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.4
• /
• pp.368-376
• /
• 2015

This paper is the study on the establishment of design model to improve design efficiency using modified weight estimation equation on the initial design stage for development of a helicopter. The methodology to extract coefficients of the weight estimation equation was proposed through the influence investigation for the weight of components and the parameter study and sensitivity analysis for design variables such as the rotor disk loading, the number of blade and the aspect ratio of blade were also performed. As a result of study, the relation of parameters and degree of sensitivity of parameters on helicopter design are considerable points for optimization of helicopter characteristics, and it is necessary for designer to consider the complex relation of main parameters.