Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Failure Maps and Derivation of Optimal Design Parameters for a Quasi-Kagome Truss Sandwich Panel Subjected to Bending Load

굽힘하중을 받는 준 카고메 트러스 샌드위치 판재의 파손선도와 최적설계변수의 도출

  • 임채홍 (넥센타이어(주)) ;
  • 전인수 (전남대학교 기계시스템공학부) ;
  • 강기주 (전남대학교 기계시스템공학부)
  • Published : 2007.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

A new metallic sandwich panel with a quasi-Kagome truss core subjected to bending load has been analyzed. First, equations of the failure loads corresponding to the eight failure modes are presented. Then, non-dimensional forms of the equations are derived as functions of three geometric variables, one material parameter (yield strain), one load index and one weight index. Failure maps are presented for a given weight index. By using the dimensionless forms of equations as the design constraints, two kinds of optimization are performed. One is based on the weight, that is, the objective function, namely, the dimensionless load is to be maximized for a given weight. Another is based on the load, that is, the dimensionless weight is to be minimized for a given load. The results of the two optimization processes are found to agree each other. The optimized geometric variables are derived as a function of given weights or failure loads. The performance of the quasi-Kagome truss as the core of a sandwich panel is evaluated by comparison with those of honeycomb cored and octet truss cored panels.

Keywords

References

  1. Bart-Smith, H., Hutchinson, J.W., Evans, A.G., 2001, 'Measurement and Analysis of the Structural Performance of Cellular Metal Sandwich Construction,' International Journal of Mechanical Sciences, Vol. 43, pp. 1945-1963 https://doi.org/10.1016/S0020-7403(00)00070-9
  2. Deshpande, V.S. and Fleck, N.A., 2003, 'Energy Absorption of an Egg-Box Material,' Journal of the Mechanics and Physics of Solids, Vol. 51, pp. 187-208 https://doi.org/10.1016/S0022-5096(02)00052-2
  3. Wadley, H.N.G., Fleck, N.A., and Evans, A.G., 2003, 'Fabrication and Structural Performance of Periodic Cellular Metal Sandwich Structures,' Composite Science and Technology, Vol. 63, pp. 2331-2343 https://doi.org/10.1016/S0266-3538(03)00266-5
  4. Sypeck, D.J. and Wadley, H.N.G., 2001, 'Cellular Metal Truss Core Sandwich Structures,' Proceedings of the 2nd International Conference on Cellular Metals and Metal Foaming Technology (MetFoam 2001) edited by J. Banhart, M.F. Ashby, N.A. Fleck, pp. 381-386
  5. Kim, T., Zhao,, C.Y., Hodson, H.P. and Lu, T.J., 2004, 'Convective Heat Dissipation with Lattice-Frame Materials, Mech. Mater. Vol. 36, pp. 767-780 https://doi.org/10.1016/j.mechmat.2003.07.001
  6. Kim, T., Hodson, H.P. and Lu, T.J., 2004, 'Fluid-Flow and Endwall eat-Transfer Characteristics of an Ultralight Lattice-Frame Material,' Int. J. Heat Mass Transfer Vol. 47, pp. 1129-1140 https://doi.org/10.1016/j.ijheatmasstransfer.2003.10.012
  7. Lu, T.J., Hutchinson, J.W. and Evans, A.G., 2001. Optimal Design of a Flexural Actuator. J. Mech. Phys. Solids 49, pp. 2071-2093 https://doi.org/10.1016/S0022-5096(01)00024-2
  8. Lucato, S.L. dos Santos, Wang, J., Maxwell, P., McMeeking, R.M. and Evans, A.G., 2004, 'Design and Demonstration of a High Authority Shape Morphing Structure,' International Journal of Solids and Structures, Vol. 41, pp. 3521-3543 https://doi.org/10.1016/j.ijsolstr.2004.02.012
  9. Lim, C.H., Lim, J.H., Jung, J.G., Lim, J.D. and Kang, K.J., 2007, 'Mechanical Behavior of Sandwich Panels with Quasi-Kagome Truss Core Fabricated from Expanded Metals,' KSME Transaction A, Vol. 30, pp. 1078-1085 https://doi.org/10.3795/KSME-A.2006.30.9.1078
  10. Kang, K.J., Lim, C.H., Ko, K.D., Park, H., Kim, N.L., 2007, Korea Patent 10-2004-0057553
  11. Lim, C.H., Lim, J.H., Jung, J.G., Lim, J.D. and Kang, K.J., 2006, 'The Structural Performance of Pseudo Kagome Truss Core Sandwich Panels,' ASME International Mechanical Engineering Congress and Exposition, Chicago, USA, No. MECE2006-15549, Nov. 2006
  12. Wicks, N. and Hutchinson, J. W., 2001, 'Optimal Truss Plates,' International Journal of Solids and Structures, Vol. 38, pp. 5165-5183 https://doi.org/10.1016/S0020-7683(00)00315-2
  13. Wicks, N. and Hutchinson, J. W., 2004, 'Performance of Sandwich Plates with Truss Cores,' Mechanics of Materials, Vol. 36, pp. 739-751 https://doi.org/10.1016/j.mechmat.2003.05.003
  14. Ashby, M.F., Evans, A.G., Fleck, N.A., Gibson, L.J., Hutchison, J.W., and Wadley, H.N.G. 2001, Metal Foams: A Design Guide, Butterworth Heinemann, pp. 116-120
  15. Zok, F.W., Waltner, S.A., Wei, Z., Rathbun, H.J., McMeeking, R.M., and Evans, A.G., 2004, 'A Protocol for Characterizing the Structural Performance of Metallic Sandwich Panels: Application to Pyramidal Truss Cores,' International J. of Solids and Structures, Vol. 41, pp. 6249-6271 https://doi.org/10.1016/j.ijsolstr.2004.05.045
  16. Seong, D.Y., Jung, C.G., Yoon, S.J., Yang, and Ahn, D.G., 2006, 'Formulation of Optimal Design Parameters and Failure Map of Metallic Sandwich Plates with Inner Dimpled Shell Structure Subjected to Bending Moment,' Journal of the Korean Society of Precision Engineering, Vol. 23, pp. 127-136
  17. Ugural, A.C., 1981, Stresses in Plates and Shells, McGraw-Hill, p.156
  18. Zok, F.W., Rathbun, H.J., Wei, Z. and Evans, A.G., 2003, 'Design of Metallic Textile Core Sandwich Panels,' International J. of Solids and Structures, Vol. 40, pp. 5707-5722 https://doi.org/10.1016/S0020-7683(03)00375-5
  19. Lim, C.H., Jeon, I. and Kang, K.J., 2007, 'A New Type of Sandwich Panel with Periodic Cellular Metal Cores And Its Mechanical Performances,' submitted to International Journal of Solids and Structures