• 보존과학연구
• /
• 통권29호
• /
• pp.65-90
• /
• 2008

This study examines the status and the physical features of Paraloid B-72 layers with examination of microstructure and analysis of organic matters. Paraloid B-72 layers were coated on samples from the colour layer of outer wall painting in Mireuk hall in Geumsan temple. On the basis of the previous examination result, it has made the samples which are similar to outer wall in Mireuk hall in Geumsan temple. The samples can be divided into two, one; 5% Paraloid B-72 coating and another is without coating. Then samples have been experimented under the compulsive environments of infrared radiation and immersion, thereafter compared the results of the damages and physical features between two samples. As a result of the comparison, the sample with Paraloid B-72 had more serious cracks, exfoliations and peeling layers than that of without Paraloid B-72. Otherwise, in the examination of ultraviolet radiation, the sample with Paraloid B-72 coating showed weaker physical properties, less density in structure of colour layer and less hardness in surface of colour layer than the sample without coating. The percentage of moisture content after the ultraviolet radiation was higher in the sample without Paraloid B-72 than the sample with Paraloid B-72 coating. Observing the conditions before the ultraviolet radiation, the sample with Paraloid B-72 coating demonstrated lower rate in moisture evaporation rate than the sample without Paraloid B-72. As a consequence, in examination of this samples, the change of physical features are increased in the sample with Paraloid B-72 coating than that without Paraloid B-72 when compulsive environment of heat, moisture and ultraviolet rays for a short term are imposed.

• 헤리티지:역사와 과학
• /
• 제50권3호
• /
• pp.88-109
• /
• 2017

현재 비가역성 재료로 알려져 있는 Paraloid b-72의 제거방법으로는 대상재질의 종류에 따라 차이는 있지만 유기용매 및 가열 방식을 이용한 방법들이 일반적으로 사용되었으나, 흙벽화에 적용시키는 문제는 처리방법의 한계성과 손상위험 때문에 지금까지 적용되지 못하였고, 제거 효율 또한 검증되지 못하였다. 이에 따라 본 연구에서는 흙벽화에 사용된 Paraloid b-72를 가장 안전하게 제거할 수 있는 방법을 모색하였으며, 가장 효율적일 것으로 판단되는 습포방식을 적용하여 실험하였다. Paraloid b-72에 대한 용해성이 확인된 용해제들을 흡착제인 활성탄소섬유와 Methyl Cellulose에 적용시켜 동일한 크기와 조건으로 제작된 흙벽화 시료표면에 일정시간 흡착용출 시킨 후 제거하여 안정성과 제거효과를 비교하였으며, 이를 통해 과거 Paraloid b-72로 보존처리 되었던 금산사 미륵전 벽화 및 다른 벽화 문화재에 대한 적용가능성을 확인하고자 하였다. 실험결과, 흡착제인 활성탄소섬유와 Xylene을 단독 또는 빠른 기화성을 가진 다른 용해제와 혼합하여 적용하였을 때 효과적이고, 그 중 Acetone:Xylene(1:1wt%)이 가장 안정적임을 알 수 있었다. 이 결과는 향후 진행될 수 있는 금산사 미륵전 벽화의 Paraloid b-72 제거와 그밖의 다른 벽화 문화재의 원형복원을 위한 기초자료로 활용될 수 있을 것으로 본다.

• 보존과학연구
• /
• 통권29호
• /
• pp.183-197
• /
• 2008

Paraloid B-72 of acrylic resins has been widely used as consolidant for bronze artifacts conservation. In previous study, xylene was appropriate for paraloid B-72 when bronze artifacts consolidated. In this study, we compared the coating properties of paraloid B-72 in various concentration levels. The surface before and after coating were observed by optical microscope and AFM. Thickness and adhesive strength of films were tested. For testing coating stability, we performed yellowing test and EIS. After these experiments, we concluded 15wt% paraloid B-72 was adequate concentration for bronze artifacts conservation when paraloid B-72 used in xylene as solvent. Because 15wt% paraloid B-72 has the lowest polarity and high hydrophobic.

• 보존과학회지
• /
• 제22권
• /
• pp.61-76
• /
• 2008

청동문화재 보존처리의 강화처리제로 가장 많이 쓰이고 있는 아크릴 수지인 Paraloid B72와 용제 4종(Acetone, MEK, Toluene, Xylene)을 선정하여 각 용제별 코팅 특성을 비교 분석하였다. 코팅 전 후의 표면을 현미경과 AFM을 통해 관찰하고 박막의 두께와 코팅 표면의 접촉각을 측정하여 표면에너지를 계산하였다. 그리고 Scratch Test를 통해 코팅 박막의 접착력을, 황변실험을 통해 코팅의 지속성을 조사하였다. 그 결과 Xylene을 용제로 사용하는 것이 육안으로 보았을 때 색 얼룩이 적고 적절한 소수성과 고른 표면을 가짐을 확인했다. 또한 코팅의 조건인 박막 두께가 얇으면서 접착력이 우수하며 황변에도 안정해야 한다는 점에서도 10% Paraloid B72 in xylene이 다른 용제에 비하여 우수한 코팅 성질을 가진다는 것을 확인하였다. 그러나 Paraloid B72의 적정농도를 찾기 위해서는 더 많은 실험과 분석이 이루어져야 할 것이다.

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2007년도 제26회 추계학술대회
• /
• pp.43-45
• /
• 2007

• 보존과학회지
• /
• 제34권6호
• /
• pp.569-580
• /
• 2018

The possibility of applying poulticing was studied for removing Paraloid B72, a resin used for fixing an earthen mural painting. Five types of poultices were selected from clay and gel types, and acetone, ethanol, and methyl ethyl ketone(MEK) were used as mixed solvents. The possibility of mixing between the poultice and solvent was investigated, and then the spreadability, fluidity, acidity, drying properties, and solubility of the poultices were examined to confirm the characteristics. A poultice agent, which is suitable for applying to a mural painting, was selected and applied to a painting layer sample coated with Paraloid B72. As a result, all painting layers were good condition at under 50% of the solvent. The removal efficiency of Paraloid B72 was more effective when most of the solvents were used at 50%, rather than at 25%. However, it is difficult to mix 50% of MEK and ethanol with the gel-type poultices. When used at 25%, the removal performance was poorer than that at 50%, but the mixing with all the poultices was successful. In addition, the adsorption and removal power of the gel-type poultice were better than those of the clay-type, but the latter was expected to be more suitable in short-time cases due to its high drying speed. The results of this study show that the dissolution performance varies depending on the poultices and solvents. Hence, the poultice and solvent should be selectively applied, considering the fixative of the mural to be removed.

• 보존과학회지
• /
• 제27권2호
• /
• pp.135-144
• /
• 2011

금속유물 보존처리시 유물 상태, 재질 및 환경 등 보존처리자의 판단에 따라서 다양한 코팅제를 사용하게 된다. 코팅제 종류 및 용제에 따라서 cyanoacrylate 접착제의 초기접착속도에 차이를 나타내므로 보존처리 효율성과 연관이 있다. 본 연구에서는 코팅제 종류와 용제에 따라 cyanoacrylate 접착제의 초기접착속도에 미치는 영향과 원인에 대해 알아보았다. 그 결과, 표면의 거칠기가 편평할수록 접착제의 젖음성이 향상되어 빠른 접착이 이루어졌다. 또한 V-Flon의 C-F, C-O-C 흡수 피크와 코팅제의 분자량과 유리전이온도는 초기접착속도에 영향을 미치는 요인으로 크게 작용하였다. 이와 같은 표면 화학적 분석 결과를 토대로 초기접착속도를 측정한 결과 접착제의 종류 및 점도에 따른 상대적 차이는 있으나 모든 접착제에서 V-Flon > Paraloid B-72(in xylene) > Paraloid NAD-10 > Paraloid B-72(in acetone)순으로 초기접착속도를 확인하였다.

• 복식
• /
• 제57권9호
• /
• pp.67-75
• /
• 2007

The purpose of this research is to conserve of golden decoration(Jikgeumdan) of Chima(skirt) and Jeogori(Korean jacket) of the costumes excavated from Hangju Gi' tomb(17th Century) of Joseon dynasty$(1392{\sim}1910)$ and to focus on the development of conservation skill to prevent flakings of gold leaves in gilt paper strips. Up to the present, in case of golden decorations of costumes excavated from tombs of Joseon dynasty, some of gold leaves in gilt paper strips of costumes were flaked away by deterioration of adhesives in tombs. However, most of gold leaves were flaked away and totally lost by wet cleaning for eliminating contaminants after excavation. In order to prevent flaking, preliminary experiments for re-adhesion of gold leaves have been carried out. Firstly, simulation was performed using gold leaf which was available in the market. Adhesives used in this research were water-soluble adhesives(hide glue(cow, rabbit), glue made from air bladders of sciaenoid fish and Primal AC-3444 of acrylic emulsion) and solvent-soluble adhesives(acrylic adhesive Paraloid B-67 and B-72). Because of difficulty in wetting and spreading of adhesive solutions into the interface between gold leaf and Korean paper, water-soluble adhesives were not proper for adhesion of gold leaf and Korean paper. Solvent-soluble adhesives were easily infiltrated into interface between gold leaf and Korean paper and the adhesive force was also satisfied. From this result, the researchers chose more flexible Paraloid B-72$(Tg\;40^{\circ}C)$ 1% solution than Paraloid B-67$(Tg\;50^{\circ}C)$ for adhesion of gold leaf and Korean paper. Secondly, using Paraloid B-72 1% solution, the estimations of re-adhesions of gold leaves in gilt paper strips of Jeogori were carried out. When Paraloid B-72 1% solution was injected three times into the interface between gold leaf and Korean paper, the re-adhesion was most effective. On the basis of the results in these preliminary experiments, re-adhesions of gold leaves in gilt paper strips of Chima and Jeogori were carried out on condition of three times injections of Paraloid B-72 1% solution before wet cleaning. After wet cleaning, the most of the gold leaves were survived, which was confirmed by both the examination with the naked eye and the microscopic examination.

• 한국의류학회지
• /
• 제33권8호
• /
• pp.1315-1324
• /
• 2009

This study is on the consolidation process of the conservation process of fabric with golden thread found in relics. Gold film was glued to pieces of Korean paper and satin using hide glue, which is a natural adhesive and resin Paraloid B-72, which is a liquid type adhesive. This study examines the types and concentration of the adhesives that are appropriate for consolidating gold film on fabric. The advantage of hide glue is that it is harmless to humans and has a high stability. This glue is also believed to be the closest to the adhesive that was used when the relic was originally made. Its weakness is that it is stiff and weaker than chemical glues, but after being washed with water the adhesion level increases. Therefore, hide glue is appropriate in the following instances: a) when washing after consolidation b) when the substrate of gold threads are significantly damaged, and c) when treating greater sized relics that take a longer time to work on. However, Paraloid B-72 has a better adhesion and flexibility than hide glue, but tends to spread out into a greater area, and the area where it is applied tends to absorb less water than before the application. In addition, it is noxious and can be harmful in long-term exposure. Therefore, Paraloid-72 is appropriate in the following instances: a) when consolidating the fabric after washing, and b) when working on smaller relics and consolidating smaller parts of a relic. The necessary concentration levels for consolidants for gold film are 30% for liquid type hide glue and at least 10% for Paraloid B-72 in order for the gold film to stay intact on the fabric during washing, consolidation, exhibition, and conservation.

• 보존과학연구
• /
• 통권21호
• /
• pp.77-99
• /
• 2000

Tumuli located in Chodang-dong in Kangreung City are sitesexcavated by the Museum of Kangreung University in 1993.Ofthese sites, a gilt bronze crown and gilt bronze sword with ring pommel with a tri-leaf ornament were excavated from the B-16tumulus. Underneath the gilt bronze crown was the gilt bronzes word with ring pommel with tri-leaf ornament, and these artifacts were treated with Polyurethane foams on the spot followed by special measures for conservation. This manuscript describes measures for conservation andanalysis with regard to the gilt bronze crown, gilt bronze sword with ring pommel with tri-leaf ornament and gilt bronze beltornaments. Bronze on the gilt bronze crown was completely corroded, therefore it was consolidated together with soil in the back of the artifact with Paraloid B72 after cleaning. Polyurethanefoams bottom was finished by applying the mixture of Epoxy resinAW106 and HV935K with soil. On the sword with ring pommel, the wooden part of the hilt was coated with Paraloid B72 (in Xylene) and the blade was consolidated with Paraloid NAD-10 30% after desalting with Sodium sesquicarbonate method. The gilt bronzebelt ornaments were treated with 3% Benzotriazole, coated with Paraloid B72 and then joined by using Cyanlacrylate. Specimens for the gilt bronze crown and gilt bronze belt ornaments were produced and gilding layers were examined under a metallographic microscope. The gilt bronze crown and the gilt bronze belt ornament maintained relatively good gilding quality with uniform gilding layers. Analysis of wood for the sheath of the sword with ring pommel revealed it to be Juglans mandshurica. Further more, analysis of constituents for a blue colored grassbead from dissolution of Polyurethane foams found it to be from the $Na_2O$-CaO-$AI_2O_3$-$SiO_2$ family.