• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1614-1616
• /
• 2000

The purpose of this study is to manufacture and test a thermoelectric generator which converts unused energy from close-at-hand sources, such as garbage incineration heat and industrial exhaust, to electricity. A manufacturing process and the properties of a thermoelectric generator are discussed before simulating the thermal stress and thermal properties of a thermoelectric module located between an aluminum tube and alumina plate. We can design the thermoelectric modules having the good properties of thermoelectric generation. Resistivity of thermoelectric module for thermoelectric generation consisting of 62 cells was $0.15{\sim}0.4{\Omega}$. The maximum power of thermoelectric generator using thermoelectric generating modules can be defined as temperature function, and in this case it can be analogized the linear relation between current and voltage characteristics as function of temperature. The thermoelectric generator using 128 generating modules was assembled with 4 parallel connected modules sets composed with 32 directly connected modules.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.585-593
• /
• 2020

Until now, 29 fire accidents have occurred; 22 of them were caused by the interconnection of renewable energy sources that occurred during the rest period after the lithium-ion battery had been fully charged regardless of the seasons. The fire accidents of ESS were attributed to thermal runaway due to the overcharging of a few cells with the phenomenon of self-energy balancing, which is unintentional current flow from cells with a high SOC to the low cells if the SOC condition of each cell connected in parallel is different. Therefore, this paper proposes a novel configuration and operation algorithm of the BMS to prevent the self-energy balancing of ESS and presents a hybrid SOC estimation algorithm. From the test results of the self-energy balancing phenomenon between aging and normal cells based on the proposed algorithm and BMS, it was confirmed the possibility of self-energy balancing, which is unintentional current flow from cells with a high SOC to cells with a low SOC. In addition, the proposed configuration of the BMS is useful and practical to improve the safety of lithium-ion batteries because the BMS can reliably disconnect a parallel connection of the cells if the self-energy balancing current becomes excessively high.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.139-139
• /
• 2009

As ideal new energy, solar cell has renewable and inexhaustible characteristics and the fuel cell only needs low maintenance and low operating cost. This paper introduces hybrid system of solar cell and fuel cell considering the advantages of stable and sustainable energy from the economic point of view. Then the paper shows the I-V characteristics of the solar module which are dependent on the power of the halogen lamp and the P-I and I-V characteristics of fuel cells which are connected in parallel and series.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.568-573
• /
• 2009

Because of environmental crisis, researchers are seeking and developing a new, clean, safe and renewable energy. Solar cell energy and fuel cell energy have inestimable development potential. The paper introduces hybrid photovoltaic-fuel cell generation systems supplying a remote power load and hybrid system of solar cell and fuel cell considering the advantages of stable and sustainable energy from the economic point of view. Fuel cell power system has been proven a viable technology to back up severe PV power fluctuations under inclement weather conditions. Fuel cell power generation, containing small land us, is able to alleviate the heavy burden for large surface requirement of PV power plants. In addition, the PV-fuel cell hybrid power system shows a very little potential for lifetime $CO_2$ emissions. In this paper shows the I-V characteristics of the solar module which are dependent on the power of the halogen lamp and the I-V characteristics of fuel cells which are connected in parallel. Also, it shows efficiency of the hybrid system.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.557-562
• /
• 2009

Recently, researchers are developing a new, clean, renewable and sustainable energy to the industrial areas and the residential areas. Solar cell and fuel cell energy are presented in this paper. The paper shows the P-I and I-V characteristics of fuel cells which are connected in parallel and series. And the voltage drop of internal resistance of the fuel cell decreases with the increasing of the current of the fuel cell. A voltage drop at the internal resistance is increased according to the current, thus the terminal voltage is decreased. The internal resistance is calculated $0.3[\Omega]$ from maximum power transfer condition.

• Journal of the military operations research society of Korea
• /
• v.9 no.1
• /
• pp.29-49
• /
• 1983

The algorithm developed in this paper utilized kettelle's [1] idea of the undominated allocation sequence and his way of tableau computation to solve the more general spares allocation problem in the system availability optimization. The algorithm is to optimally allocate resources to the independent modules which are connected to be series/parallel/mixed system configurations. It has advantages over the standard dynamic programming algorithm by eliminating the need for backtracking and by solving the allocation problem for any budget size. By careful heuristic inspection the algorithm can be made very efficient for manual calculations because large blocks of cells can be eliminated from computation. A numerical example is provided to illustrate the allocation algorithm.

• The Korean Journal of Zoology
• /
• v.15 no.3
• /
• pp.111-131
• /
• 1972

Fine structures of retina of an ommatidium in dragonfly, having eyes of closed rhabdom type, were studied under light and electron microscopes. The ommatidia consisted of eight retinular cells distributed in a circular pattern and the retinular layer in turn can be divided into three sublayers according to the number of cells in the retina. Each retinular cell has different starting points in the retina and the length of retinular cells is varied greatly; the length of one distal retinular cell shows one half of that of others. In the middle layer, three proximal retinular cells interconnect the adjacent two rhabdoms which are triangular in the appearence of the cross section which in turn consisted of tubular, parallel and lamellated microvilli. The rhabdom is formed by three rhabdomeres, each of which is separated by $120^{\circ}$ between them, but they can be distinguished into two parts according to electron density. Around the outer part of microvilli composing rhabdom, electron density was much less than the inner part of the structure. The microvilli of the inner part appear to be connected to the cytoplasm of retinular cells. Rough endoplsmic reticulum with enlarged cisternae runs through the vacuoles in the outer part of distal retinular cells. Abundant mitochondria concentrated in the vicinity of rhabdom are found at the central part of the retinular cells, while in the area of immediate vicinity of the rhabdom, prominent vacuoles are observed. Above the rhabdom of an ommtidium stands a crystalline cone which is consisted of four cone cells arranged radially along the axis. The crystalline cone is surrounded by cells containing pigment granules. The outermost photoreceptor element of an ommatidium is corneal lens.

• Applied Microscopy
• /
• v.42 no.3
• /
• pp.124-128
• /
• 2012

Leaf surface structures were investigated in the Chinese juniper Juniperus chinensis by scanning electron microscopy. Adult scale leaves were collected from the tree, air-dried at room temperature, and sputter-coated with gold without further specimen preparation. Approximately fi ve stomata were locally distributed and arranged in clusters on the leaf surface. Stomata were ovoid and ca. 40 ${\mu}m$ long. The epicuticular wax structures of J. chinensis leaves were tubules and platelets. Numerous tubules were evident on the leaf regions where stomata were found. The tubules were cylindrical, straight, and ca. 1 ${\mu}m$ in length. They almost clothed the stomatal guard cells, and occluded the slit-shaped stomatal apertures. Moreover, the wax ridges were flat crystalloids that were connected to the surface by their narrow side. They did not have distinct edges, and their width/height ratio varied. In particular, the wax ridges could be discerned on the leaf regions where stomata were not present nearby. Since the wax ridges did not have distinct edges on their margin, they were identified as platelets. Instances were noted where platelets were oriented either parallel to each other or perpendicular to the cuticle surface. These results can be used in biomimetics to design the hierarchical structures for mimicking the plant innate properties such as hydrophobicity and self-cleaning effects of the leaf surface.

• Development and Reproduction
• /
• v.19 no.4
• /
• pp.197-207
• /
• 2015

This study investigated structure and function of the reproductive system in Aplysia kurodai by means of anatomical, histological, and histochemical observation. Reproductive system of this species is consisted of ovotestis, small hermaphroditic duct, ampulla, accessory genital mass and large hermaphroditic duct. The ovotestis is composed of a large number of follicles, and both oocytes and spermatocytes matured in the same follicle. The small hermaphroditic duct is a single tube and contains a swelling, the ampulla, which functions as a storage organ for endogenous sperm and an oviduct. The accessory genital mass is connected to both the small and large hermaphroditic duct, and consisted of three glands: albumen, membrane (winding) and mucus gland. The albumen gland is consisted of granular cells producing basophilic and neutral mucopolysaccharides. The membrane and mucus gland are consisted of granular cells producing acidophilc and sulfated mucopolysaccharides. The large hermaphroditic duct is a single tubular gonoduct linking the accessory genital mass to the common genital aperture but is consisted of two parallel compartments. Internally, these two compartments are incompletely divided by internal septum or fold, which are called as the red hemiduct and white hemiduct, respectively. The red hemiduct functions as an oviduct and the white hemiduct functions as a copulatory duct. The reproductive system of A. kurodai is externally comprised a single tube, i.e., monaulic type. However, internal structure of duct is incompletely divided into oviduct and copulatory duct, i.e., the oodiaulic type.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.3
• /
• pp.242-249
• /
• 2011

The proposed converter has easy device selection for high step-up and high power applications since boost half bridge and voltage doubler cells are connected, respectively, in parallel and series in order to increase output power and voltage. Especially, optimized design of high frequency transformers is possible owing to reduced turn ratio and eliminated dc offset, and distributed power through three cores is beneficial to low profile and thermal distribution. The proposed converter does not necessitate start-up circuit and additional clamp circuit due to the use of whole duty range between 0 and 1 and is suitable for applications with wide input voltage range. Also, high efficiency can be achieved since ZVS turn on of switches are achieved in wide duty cycle range and ZCS turn on and off of diodes are achieved. The proposed converter was validated through 5 kW prototype.