• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.10
• /
• pp.56-64
• /
• 2009

This paper presents a parallel typed walking robot which can walk in omni-direction and climb from a floor to a wall. We design a six D.O.F leg mechanism composed of three legs, which form a parallel mechanism with a base and a ground to generate arbitrary poses. Optimal design is conducted to maximize the walking space and the dexterity, which are normalized by the stroke of leg. Kinematic parameters are found to maximize the weighted optimal objectives. We design a triple parallel mechanism robot by inserting Stewart platform between the upper leg mechanism and the lower leg mechanism and examine the gaits when the robot walks on the ground and climbs from a floor to a wall. The analysis of walking space and dexterity for each gait shows that the triple parallel walking robot has a large walking space with a large stability region. We explore the possibility that the robot can climb from a floor to a wall. Investigating the gaits for the six steps proves that the robot can lift the foot up to the wall by combining the orientational walking space generated by three parallel mechanisms.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.4
• /
• pp.310-318
• /
• 2008

This paper presents a parallel typed walking robot to improve walking space and stability region. The robot is designed by inserting an intermediate mechanism between upper leg mechanism and lower leg mechanism. The leg mechanism is composed of three legs and base, which form a parallel mechanism with ground. Seven different types of walking robot are invented by combining the leg mechanisms and an intermediate mechanism. Topology is applied to design the leg mechanism. A motor vector is adopted to determine Jacobian and a wrench vector is used to analyze dynamics of the robot. We explore the stability region of the robot from the reaction force of legs and compute ZMP including the holding force to contact the foot to a wall. This investigates a walking stability when the robot walks on the ground as well as on the wall. We examine the walking space generated by support legs and by swing legs. The robot has both a large positional walking space and a large orientational walking space so that it can climb from a floor up to a wall.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.7
• /
• pp.9-18
• /
• 2001

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.708-713
• /
• 2004

This research develops a sensorless hydraulic servo system of Parallel-Typed robot for harbour construction. Purpose of the robot is to mechanize the construction, which is accomplished through a joystick's operating by a stoneworker (or diver). The robot is attached on the end of an excavator as its attachment or transported by a crane to reach the desired place. The embedded compact controller is installed on the robot body and controlled by wireless telecommunication. For underwater work, it is necessary to waterproof the robot and its sensors. Especially, a sensor waterproof is a main drawback for the underwater robot. This leads us to develop a hydraulic robot position controller using an observer which gives the position information without any position sensor. We design a neural network to identify the displacement change according to the command voltage to servo valve. To verify the sensorless controller, this paper presents the performance of the sensorless control for which the position is given by the observer comparing with that of the sensor control for which the position is measured by LVDT sensors.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1781-1786
• /
• 2003

This research develops a robot as the device which constructs underwater harbour. This construction is to build a breakwater, which is dangerous and difficult. The hydraulic parallel mechanism-typed robot is developed to mechanize the construction by operating of a stoneworker (or diver) through a joystick. The six-dof robot is able to carry 2-3 tons' heavy stone and put it on the surface of breakwater. This paper presents the mechanical design of a miniature robot, its control and application for the breakwater construction.

• Journal of Navigation and Port Research
• /
• v.33 no.5
• /
• pp.323-330
• /
• 2009

We have been developing an underwater robot for harbour construction using a parallel mechanism The robot is attached to the rope of a crane, which curries a large stone into the undersea The robot's yaw and pitch are controlled by hydraulic cylinders but its roll is uncontrollable. We mount propellers in both side of the robot to generate the roll motion This paper studies on the control for the roll motion of a underwater robot. A gyro-sensor is used to measure the angle in a roll motion We develop the dynamic model to describe the robot's roll motion by a second order non-linear system and identify the model parameters by recursive least square and adaptive identifier. PD control, recursive model based control and adaptive model based control are applied with the dynamic model which computes the control input to compensate disturbances. This paper introduces the underwater robot system and presents the simulated and experimental results of the proposed controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.81.1-81
• /
• 2002

$\textbullet$ This paper presents a study on the development of a walking robot for an armor-stone work of the breakwater construction. The armor-stone work is putting stones about 0.3 ∼ 2m3 on the surface of the breakwater to prevent it from waving. $\textbullet$ This work has been done manually, and its process plan is uncertain by effects of the weather, wave and tide of sea. Therefore the constructional cost is considered to be wasteful $\textbullet$ Working in underwater as well as on land for human workers causes the accident and caisson disease, so it is necessary to replace the process to be mechanized. $\textbullet$ The basic requirements of the robot for mechanizing are as follows : 1) To have a large...

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.3
• /
• pp.299-308
• /
• 2011

In this study, we develop a pressure observer to measure the cylinder length of a harbor-construction robot. For the robot control, sensors are required to measure the length of a hydraulic cylinder. The cylinder-position sensor is relatively expensive when the operating environment prohibits external approaches for the measurement of the cylinder position. LVDT or linear scales are usually mounted on the outside of the cylinder, which causes poor durability on a construction site. We use a pressure sensor to indirectly estimate the length of the cylinder. The pressure sensor is mounted inside a hydraulic valve box so that it is protected by the box and easy to waterproof for an underwater robot. By treating oil as a compressible fluid, we derive the nonlinear pressure dynamics as a function of the cylinder position, velocity, and pressure. The recursive least squares (RLS) algorithm is applied to identify the dynamic parameters, and the pressure observer estimates the cylinder position through the pressure acting on the head and the rod of the hydraulic cylinder. The position accuracy is relatively low, but it is acceptable for a construction robot that handles large armor stones.