• Proceedings of the KIPE Conference
• /
• 2002.11a
• /
• pp.213-217
• /
• 2002

Power devices for high power drivers that need high switching speed (IGCT, HVIGBT) have been continuously developed. However, serial and parallel connections using several much cheaper, lower power capacity of devices than an expensive high power device are very useful methods in the aspect of cost down and high power application. Even the current and voltage unbalance problem is occurred at each devices. This unbalance characteristics are mainly caused by the differences of physical characteristics of each devices and the line inductance (stray inductance) of bus bars that consist of current path. This paper deals simulation analysis of serial connection of IGCTs and parallel connection of IGCTs using physical model of devices. And also, introduces the method to reduce the voltage and current unbalance problem.

• Journal of Power Electronics
• /
• v.10 no.6
• /
• pp.686-693
• /
• 2010

In this paper, a fault diagnosis method based on fuzzy logic for the three-parallel power converter in a wind turbine system is presented. The method can not only detect both open and short faults but can also identify faulty switching devices without additional voltage sensors or an analysis modeling of the system. The location of a faulty switch can be indicated by six-patterns of a stator current vector and the fault switching device detection is achieved by analyzing the current vector. A fault tolerant algorithm is also presented to maintain proper performance under faulty conditions. The reliability of the proposed fault detection technique has been proven by simulations and experiments with a 10kW simulator.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.11
• /
• pp.94-100
• /
• 2000

This paper proposes a method of geometric error calibration for a parallel using only sensor of length measurement without additional sensors. The concept is generalized which creates measurement residuals by exploring conflicting information provided with external length sensing. Although this calibration method requires many configurations, it has an advantage of using relatively simple length measurements. This method is shown to provide good calibration results, especially when there exist smaller measurement noises and more configurations are measured.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.4
• /
• pp.93-102
• /
• 1995

This paper introduces a general purpose Associative Processor(AP) which is very efficient for search-oriented applications. The proposed architecture consists of three main functional blocks: Content-Addressable Memory(CAM) arry, row logic, and control section. The proposed AP is a Single-Instruction, Multiple-Data(SIMD) device based on a CAM core and an array of high speed processors. As an application for the proposed hardware, we present a parallel algorithm to solve a global routing problem in the layout process utilizing the processing capabilities of a rudimentary logic and the selective matching and writing capability of CAMs, along with basic algorithms such a minimum(maximum) search, less(greater) than search and parallel arithmetic. We have focused on the simultaneous minimization of the desity of the channels and the wire length by sedking a less crowded channel with shorter wire distance. We present an efficient mapping technique of the problem into the CAM structure. Experimental results on difficult examples, on randomly generated data, and on benchmark problems from MCNC are included.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.6
• /
• pp.51-58
• /
• 2002

In this paper, a 155/311 Mb/s MUX/DEMUX chip using ECL macrocell away has been developed with a single device. This device for a 2.5 Gb/s SDH based transmission system is to interleave the parallel data of 51 Mb/s into 155 Mb/s(or 311 Mb/s) serial data output, and is to interleave a serial input bit stream of 155 Mb/s(or 311 Mb/s) into the parallel output of 51 Mb/s. The input and output of the device ate TTL compatible at the low-speed end, but 100k ECL compatible at the high-speed end. The device has been fabricated with Motorola ETL3200 macrocell away The fabricated chip shows the typical phase margin of 180 degrees and output data skew less than 220ps at the high-speed end.

• Journal of The Korean Astronomical Society
• /
• v.51 no.3
• /
• pp.65-71
• /
• 2018

The near real-time speckle masking reconstruction technique has been developed to accelerate the processing of solar images to achieve high resolutions for ground-based solar telescopes. However, the reconstruction of solar subimages in such a speckle reconstruction is very time-consuming. We design and implement a new parallel speckle masking reconstruction algorithm based on the Compute Unified Device Architecture (CUDA) on General Purpose Graphics Processing Units (GPGPU). Tests are performed to validate the correctness of our program on NVIDIA GPGPU. Details of several parallel reconstruction steps are presented, and the parallel implementation between various modules shows a significant speed increase compared to the previous serial implementations. In addition, we present a comparison of runtimes across serial programs, the OpenMP-based method, and the new parallel method. The new parallel method shows a clear advantage for large scale data processing, and a speedup of around 9 to 10 is achieved in reconstructing one solar subimage of $256{\times}256pixels$. The speedup performance of the new parallel method exceeds that of OpenMP-based method overall. We conclude that the new parallel method would be of value, and contribute to real-time reconstruction of an entire solar image.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.7
• /
• pp.761-770
• /
• 2008

Impedance or admittance inverter is a conceptual 2-port device frequently used in microwave filter design. In this paper, the equivalent circuit using inverter for general loss less 2-port circuit is presented. Our equivalent circuit can be directly and easily represented with z- or y-parameters compared with the conventional methods. Based on the representation, the derived results for various coupled lines such as parallel coupled line and anti-parallel coupled lines are compared ours. In addition, the results of other workers for improvement of the distortion in frequency response of microstrip coupled line filter are derived using our representation and compared. The proposed equivalent circuit shows the difference with conventional equivalent circuit so the conventional design method can not be applied to parallel coupled line filter with our representation. So in this paper the novel design method is proposed and we showed the method yields more accurate design results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.2
• /
• pp.542-558
• /
• 2023

A digital focus index (DFI) is a value used to determine image focus in scientific apparatus and smart devices. Automatic focus (AF) is an iterative and time-consuming procedure; however, its processing time can be reduced using a general processing unit (GPU) and a multi-core processor (MCP). In this study, parallel architectures of a minimax search algorithm (MSA) are applied to two DFIs: range algorithm (RA) and image contrast (CT). The DFIs are based on a histogram; however, the parallel computation of the histogram is conventionally inefficient because of the bank conflict in shared memory. The parallel architectures of RA and CT are constructed using parallel reduction for MSA, which is performed through parallel relative rating of the image pixel pairs and halved the rating in every step. The array size is then decreased to one, and the minimax is determined at the final reduction. Kernels for the architectures are constructed using open source software to make it relatively platform independent. The kernels are tested in a hexa-core PC and an embedded device using Lenna images of various sizes based on the resolutions of industrial cameras. The performance of the kernels for the DFIs was investigated in terms of processing speed and computational acceleration; the maximum acceleration was 32.6× in the best case and the MCP exhibited a higher performance.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.9 no.4
• /
• pp.176-181
• /
• 1997

A practical, easy-to-use data acquisition device has been developed for use in civil and envirionmental engineering applications. It uses the PC parallel port for the acquisition and data transfer and is simple enough to be setup and run in laboratory and field experiment conditions. The usual limitations of data storage capacity of several data loggers was solved by using PC resources. Also versatile programming capability using high level languages of the PC programming environment such as C and Visual Basic enables the data acquisition device to be configured as a general and practical data acquisition system. An example of effective uses of the device is. provided for the water environment measurement at the Bangwha bridge construction site. The in site. test proved the device to be practical in civil and environmental engineering applications.

• Journal of the Korean Chemical Society
• /
• v.65 no.3
• /
• pp.219-229
• /
• 2021

In this study, the new electrochemical cell device using Arduino and sensor was developed, and experiments of changes in voltage at the time of serial and parallel connection of electrochemical cells were conducted to verify the effectiveness of the device. In addition, in order to examine the educational effects of the device, student's inquiry activities of measuring voltage of electrochemical cells and making objects using the voltage difference were conducted. As a result, it was confirmed that the electrochemical device using Arduino and sensor could not only perform automatic measurements and visualize data but also have a possibility to seek various educational effects through easy coding and modification of the device. Based on the results of students' performance, it was found that experimental activities using the device impart a positive effect not only on the understanding of scientific concepts, but also on the development of the practical ability to apply scientific knowledges to the real life. Educational implications are discussed in terms of 'learning by making'.